<<

A-d
A-d increasing
A-Z
   Data set header general section
   Data set header internal custom section
   Data set header RSCS section
   Data set header security section
   Job header general section
   Job header security section
   Job trailer general section
   Learning about JCL (SYSIN) jobs
   Searching the Help
   Using the Help
   Working with page layouts
A,,FORM
A,,STD
A,DCB
   Common questions for BARR/NJE
   Using BARR/TRAN
A,DEST
A_Xerox 4890
A0
A1
   Interpreting RJE diagnostic data
   Logmode table entry
A133
A2
   Commands tab
   Configuring BARR/RJE optional settings
A2 button
    use
A3
   Interpreting RJE diagnostic data
   Logmode table entry
A9 key
AB
Abandons
   Customizing the retain view
   Customizing the spool view
   Learning about the Retain Window
   Learning about the Spool Window
ABC
   Automatic Spooling tab
   Common questions for BARR/SPOOL
   Common questions for Print Utility
   File and record formats
   Receiving RJE jobs from the host
   Spooling Properties dialog box
   Tips for routing spool documents
ABC_001
   Automatic Spooling tab
   Common questions for Print Utility
   Spooling Properties dialog box
Abcd
Abcd#0000000001.txt
Abcd#0000000002.txt
Abcd.001
Abcd.002
Abcd.txt
ABCtest
ABEND
Abort Job
   Learning about the Spool Window
   Managing spool documents
About
   Accounting tab
   Advanced Node Settings dialog box
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Automatic Spooling tab
   Available user rights
   Banner Options dialog box
   Barr SNA Configuration dialog box
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Chain Selection dialog box
   Commands tab
   Common questions for Operator Console
   Common questions for printers
   Common questions for Services
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Communication Link tab
   Communications Profile tab
   Configure Multiple Start Times dialog box
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Connection Configuration dialog box
   Connection Control tab
   Content tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Define Page Layout dialog box
   Device Control tab
   Device Properties dialog box
   Disk Settings dialog box
   Display Properties tab
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   File Properties dialog box
   Format Columns dialog box
   Format tab
   Getting help
   Headers From Data Configuration dialog box
   Identifying Barr components
   Import Override Table Files dialog box
   Insert Field dialog box
   Interpreting Barr Messages
   Interpreting RJE diagnostic data
   IP Configuration tab
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Job header general section
   Job header POWER section
   Job tab
   Learning about JCL (SYSIN) jobs
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the HTML help window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Link tab HPR/IP
   LPD tab
   Managing document rights
   Managing services
   Managing spool documents
   Manual Spooling tab
   Merge Override Table Files dialog box
   Mount Forms dialog box
   NJE Configuration dialog box
   Notes tab
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Operator and Advanced rights
   Operator commands for NJE
   Operator commands for RJE
   Options tab
   Overlay Options dialog box
   Override Table tab
   Overview BHCS
   Overview Diagnostics Utility
   Overview Header fields
   Overview Operator Console
   Overview RJE
   Overview services
   Page Layout tab
   Port Properties dialog box
   Preferences tab
   Printer Groups tab
   Printer Properties dialog box
   Product features
   Remote definition
   Resource Folders tab
   Retain Start/End Date & Time dialog box
   RJE concepts
   RJE Description tab
   Routing tab
   Rule Conditions dialog box
   Rules Editor dialog box
   Schedule Print Date and Time dialog box
   Select Code Pages dialog box
   Select Connection dialog box
   Select Header Fields dialog box
   Set Destination Node dialog box
   SNA Configuration dialog box
   Socket tab
   Spool and Retain tab
   Spool Printers tab
   Spooling Properties dialog box
   Tell me about printers
   Trace tab HPR/IP
   Transform Configuration dialog box
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting SPOOL
   Troubleshooting TCP/IP
   Using BARR/TRAN
   Using the Data Conversion Utility
   Using the Help
   What's new in this release
   Working with notes
   Working with overlays
   Working with override tables
   Working with retained documents
    Learning
       Learning about the HTML help window
       Learning about the RJE Configuration Utility window
       Learning about the User Rights window
About configuring
   Device Properties dialog box
   Troubleshooting TCP/IP
    printer
About Make Banner
About Make FCB
About NJE Console
About Operator Console
About renewing
About Retain Window
About RJE Diagnostics
About routing
About Spool Window
   Available user rights
   Identifying Barr components
   Learning about the Spool Window
   Notes tab
   Working with notes
About Spool Window dialog
   Available user rights
   Notes tab
   Working with notes
About Viewer
AC
Accept
   Assigning document attribute values
   Common questions for BARR/PRINT to EPS
   Common questions for Print Utility
   Common questions for printers
   Data set header general section
   Device Control tab
   Format tab
   Information on printer status
   Job header general section
   Learning about the Spool Window
   Managing spool documents
   Managing spool printers
   Output statements
   RJE concepts
   Sending files (JCL SYSIN) to the RJE host
   Splitting jobs
   Spool Printers tab
   Tips for routing spool documents
   Troubleshooting BARR/NJE
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using the Data Conversion Utility
   Using the PRT utility
   Working with overlays
   Working with retained documents
    Metacode
Accepts PRR
Access
   Adding files to the spool
   Advanced Node Settings dialog box
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Assigned user rights
   Available user rights
   Banner Options dialog box
   Barr SNA Configuration dialog box
   Capturing diagnostics
   Chain Selection dialog box
   Choosing the correct account type
   Commands tab
   Common questions for Services
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Configure Multiple Start Times dialog box
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Connection Configuration dialog box
   Connection Control tab
   Content tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Define Page Layout dialog box
   Device Control tab
   Device Properties dialog box
   Disk Settings dialog box
   Display Properties tab
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   File Properties dialog box
   Format Columns dialog box
   Format tab
   Forms tab
   Getting help
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with NJE
   Getting started with RJE
   Getting started with SPOOL
   Headers From Data Configuration dialog box
   HPR/IP Connection Configuration dialog box
   Import Override Table Files dialog box
   Insert Field dialog box
   Interpreting Barr Messages
   IP Configuration tab
   JES2 commands for RJE
   Job header general section
   Job tab
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the HTML help window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Link tab HPR/IP
   Locating diagnostic files
   Logmode table entry
   LPD tab
   Managing spool documents
   Manually configuring readers
   Merge Override Table Files dialog box
   Mount Forms dialog box
   NJE Configuration dialog box
   Notes tab
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Operator and Advanced rights
   Options dialog box Operator Console
   Options tab
   Overlay Options dialog box
   Override Table tab
   Overview NJE
   Overview RJE
   Overview Technical Support
   Overview User Rights Configuration utility
   Page Layout tab
   Passing data to the printer without conversion
   Port Properties dialog box
   Preferences tab
   Printer Groups tab
   Printer Properties dialog box
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Remote definition
   Resource Folders tab
   RJE concepts
   RJE Description tab
   Routing tab
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Schedule Print Date and Time dialog box
   Select Code Pages dialog box
   Select Connection dialog box
   Select Header Fields dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Set Destination Node dialog box
   SNA Configuration dialog box
   Socket tab
   Spool and Retain tab
   Spool Printers tab
   Spooling Properties dialog box
   Trace tab HPR/IP
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting Services
   Using the Backup Configuration Utility
   Using the Help
   Using the RJE Console
   Using the User Rights Configuration utility
   Working with notes
   Working with printer initialization files
   Working with retained documents
   Working with spool printers
    Barr Host Communications Suite
       Common questions for the Configuration Utility
       Using the User Rights Configuration utility
    Internet e-mail
    multiple stations
       Communication link parameters
       RJE concepts
       Troubleshooting NJE
    POWER's
    Windows Spooler
Accessibility
   Learning about the RJE Console window
   Using the Help
   Using the RJE Console
Accessibility Options
   Learning about the RJE Console window
   Using the RJE Console
According
   Data set header general section
   Job header general section
    FINALMSG
    SENTMSG
    Type
ACCOUNT
Accounting
   Accounting tab
   Choosing the correct account type
   Common questions for BARR/NJE
   Overview Header fields
   Working with the accounting system
    Barr Host Communications Suite
    system
    tab
    Writing
Accounting section
   Common questions for NJE
   Job header accounting section
   Job trailer accounting section
   Overview Header fields
Accounting tab
ACCT
Acct,room,time,lines,cards,forms,copies,log,linect
ACDJS
   Common questions: Using BARR/RJE
   JES2 commands for RJE
   Troubleshooting: Receiving jobs from the host
Achieve high data transfer rates
    interface
Acknowledgments
   Remote definition
   Version and trademark
Acronym
   Choosing ports and device drivers
   Choosing the correct account type
   Common questions for BARR/PRINT TCP/IP
   Common questions for Print Utility
   Common questions for SPOOL
   Common questions for the Configuration Utility
   Communication Link tab
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring BARR/RJE optional settings
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring the spool to print to a Xerox printer
   Configuring VTAM for NJE
   Data set header general section
   Data set header internal custom section
   Data set header output processing section
   Data set header POWER section
   Device Control tab
   Device Properties dialog box
   File and record formats
   File Format tab IP Port
   Format tab
   Getting started with BARR/PRINT to EPS
   Import Override Table Files dialog box
   Information on document status
   Job header general section
   Learning about JCL (SYSIN) jobs
   Learning about the Backup Configuration Utility window
   Learning about the Spool Window
   Lines-per-form and lines-per-inch settings
   Logmode table entry
   LPD tab
   Manually sending the diagnostic file
   Options dialog box Operator Console
   Overview BARR/PRINT to EPS
   Overview LP command line
   Overview LPR
   Overview NJE
   Overview product
   Overview services
   Overview SNA connectivity for NJE
   Overview TCP/IP
   Overview Technical Support
   Printing to a Xerox printer
   Remote definition
   RJE concepts
   RJE Description tab
   Special formats
   Spool file processing
   Supported RFC1179 features
   Troubleshooting BARR/NJE
   Troubleshooting BARR/PRINT TCP/IP
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting Viewer
   Troubleshooting: Communication scope characters
   Troubleshooting: Managing connections
   Troubleshooting: Receiving jobs from the host
   Troubleshooting: Using BARR/RJE
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Working with override tables
   Working with the INI file
   Writing to a TCP/IP socket
   Xerox file formats
    Advanced Program-to-Program Communication
       Configuring the NJE auto-start feature (optional)
       Troubleshooting BARR/NJE
    Berkeley Software Development
       LPD tab
       Overview LP command line
    Enterprise Printing System
       Choosing ports and device drivers
       Common questions for BARR/PRINT TCP/IP
       Options dialog box Operator Console
    File Attribute Table
       Common questions for the Configuration Utility
       Import Override Table Files dialog box
    File Transfer Protocol
       Manually sending the diagnostic file
       Overview Technical Support
    Forms Control Buffer
       Overview product
       Troubleshooting Viewer
    Graphical Device Interface
    Job Control Language
    Job Entry Subsystems
       Device Control tab
       Troubleshooting: Receiving jobs from the host
    Job Source Language
    Laser Printer Series
       Data set header internal custom section
       Xerox file formats
    Line Condition Data Stream
       Configuring the spool to print to a Xerox printer
       File and record formats
       Getting started with BARR/PRINT to EPS
       Overview BARR/PRINT to EPS
    Line Printer Remote
       Overview LPR
       Supported RFC1179 features
    Logical Unit
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
       Configuring BARR/RJE for MS/LUA
    Media Access Control
    Peripheral Data Information Record
    Peripheral Data set Information Record
       Configuring BARR/RJE optional settings
       Device Properties dialog box
       Using the Add Sort Criteria Wizard
    Physical Unit
    Printer Control Language
    Service Control Manager
       Choosing the correct account type
       Overview services
    System Services Control Point
    Systems Network Architecture
    Universal Character Set
    Universal Naming Convention
       Learning about the Backup Configuration Utility window
       Using the Backup Configuration Utility
    Variable Blocked
       File Format tab IP Port
       Format tab
       Troubleshooting BARR/PRINT TCP/IP
    Virtual Address Extension
Action
   Advanced Printer Options dialog box
   Assigned user rights
   Common questions for BARR/SPOOL
   Common questions for NJE
   Common questions for printers
   Common questions for Services
   Common questions for the Configuration Utility
   Common questions: Using RJE
   Configuring RJE optional settings
   Connection Control tab
   Customizing the retain view
   Customizing the spool view
   Data set header LPD/user custom section
   Import Override Table Files dialog box
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Learning about the Backup Configuration Utility window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Managing document rights
   Managing services
   Overlay Options dialog box
   Overview User Rights Configuration utility
   Parsing a long header field into separate fields
   POWER commands for NJE
   POWER commands for RJE
   Preferences tab
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Splitting jobs
   Spool file processing
   Troubleshooting BARR/NJE
   Troubleshooting printers
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using the NJE Console
   Using the Operator Console to gather diagnostics
   Using the Viewer
   Working with override tables
   Working with spool printers
    device
       Data set header LPD/user custom section
       Lines-per-form and lines-per-inch settings
Action Actions
Activates
   Choosing the correct account type
   Common questions for SPOOL
   Common questions for the Configuration Utility
   Communication link parameters
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Identifying Barr components
   Installing the software
   Learning about the Spool Window
   Managing document rights
   Override Table tab
   Special formats
   Troubleshooting NJE
   Using an override table to auto-assign header fields
   Working with override tables
   Working with retained documents
    PU
       Communication link parameters
       Configuring VTAM for RJE
    VTAM PU
       Configuring the NJE auto-start feature (optional)
       Configuring VTAM for NJE
Activation Displays
    Activation dialog
Activation dialog
    Activation Displays
ACTIVE
   BARR$SN1 job
   Common questions for the Configuration Utility
   Communication link parameters
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring VTAM for RJE
   Managing document rights
   Troubleshooting: Receiving jobs from the host
   Working with BARR/RJE connections
   Working with NJE profiles
   Working with override tables
Active profile
   Communications Profile tab
   Overview NJE
   Working with NJE profiles
Active SNA
ACTPU
Add
   Accounting tab
   Adding files to the spool
   Advanced Printer Options dialog box
   Assigning document attribute values
   Automatic Spooling tab
   Barr SNA Configuration dialog box
   Capturing diagnostics
   Channel Input Port dialog box
   Choosing the correct account type
   Commands tab
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for Services
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions: Configuring RJE
   Common questions: Using RJE
   Communication Link tab
   Communications Profile tab
   Compressing data
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring the spool to print to a Xerox printer
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Connecting to the host
   Connection Configuration dialog box
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Data set header security section
   Define Page Layout dialog box
   Device Properties dialog box
   Downloading host resources using NJE
   Encrypting data
   Enhanced channel skip processing
   File and record formats
   File Format tab File Port
   File Options tab
   File Properties dialog box
   Format Columns dialog box
   Format tab
   Forms tab
   Getting help
   Getting started with BARR/PRINT to EPS
   Getting started with printers
   Getting started with RJE
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Import Override Table Files dialog box
   JES2 commands for RJE
   JES3 commands for RJE
   Job header security section
   Learning about JCL (SYSIN) jobs
   Learning about the Diagnostics Utility window
   Learning about the HTML help window
   Learning about the Make FCB window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the Spool Window
   Learning about the User Rights window
   Locating diagnostic files
   LPD tab
   Managing document rights
   Managing spool documents
   Manual Spooling tab
   Manually configuring readers
   Operator and Advanced rights
   Options tab
   Override Table tab
   Overview LP command line
   Overview printers
   Overview RJE
   Overview User Rights Configuration utility
   Page Layout tab
   Port Properties dialog box
   Printer Groups tab
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing tab
   Routing to another BHCS
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Searching the Help
   Select Header Fields dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Sending jobs to the host
   Socket tab
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting SPOOL
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Help
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
   Using the Make Banner utility
   Using the Operator Console
   Using the PRT utility
   Using the RJE Console
   Using the User Rights Configuration utility
   Welcome
   What's new in this release
   Working with banners
   Working with inline Xerox resources
   Working with LPD print queues
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with notes
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with printer initialization files
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Working with the INI file
   Writing to a TCP/IP socket
   Writing to disk
    clicking
       Printer Properties dialog box
       Spooling Properties dialog box
    create
       Managing document rights
       Working with override tables
    define
    Dest
       Configuring the spool to print to a Xerox printer
       Getting started with BARR/PRINT to EPS
    select
       Advanced Printer Options dialog box
       Working with override tables
    Use
    user
ADD EXEC PGM
Add .gz
Add All
   Select Header Fields dialog box
   Working with the accounting system
Add Block Text
Add Channel Stop
   Common questions for Make FCB
   Learning about the Make FCB window
   Using the FCB utility
Add Channel Stop dialog
   Common questions for Make FCB
   Using the FCB utility
Add Connection dialog
   Communications Profile tab
   Configuring BARR/NJE for BARR SNA
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Connection Configuration dialog box
Add dialog
Add Files
   Capturing diagnostics
   Common questions for Print Utility
   Learning about the Diagnostics Utility window
   Locating diagnostic files
Add Files button
Add Folder
   Capturing diagnostics
   Learning about the Diagnostics Utility window
Add Folder button
Add Group
   Learning about the User Rights window
   Using the User Rights Configuration utility
Add Group button
Add Host Configuration dialog
   Configuring BARR/RJE for MS/LUA
   Learning about the RJE Configuration Utility window
   Working with BARR/RJE connections
Add Host Node dialog
Add LPR Command
   Compressing data
   Encrypting data
   Routing to another BHCS
   Working with LPD print queues
Add menu
Add New User dialog
Add PATHMGR
Add Port dialog
Add Printer Wizard
   Manually configuring readers
   Printing to a TCP/IP printer
   Sending jobs to the host
   Troubleshooting Configuration Utility
    Open
       Manually configuring readers
       Printing to a TCP/IP printer
       Troubleshooting Configuration Utility
Add Printers
   Manually configuring readers
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Sending jobs to the host
   Troubleshooting Configuration Utility
   Working with printer initialization files
Add Repeating Text
Add Routing Table dialog
Add Sort Criteria Wizard
   Customizing the retain view
   Customizing the spool view
   Using the Add Sort Criteria Wizard
    Use
Add Stop
   Common questions for Make FCB
   Learning about the Make FCB window
   Using the FCB utility
Add Stop button
   Common questions for Make FCB
   Using the FCB utility
    toolbar
       Common questions for Make FCB
       Using the FCB utility
Add Text Column
Add Text Item
Add User
   Learning about the User Rights window
   Troubleshooting: Managing connections
   Using the User Rights Configuration utility
Add User button
Adding accounting
   Accounting tab
   Working with the accounting system
ADDR
   Communication link parameters
   Configuring VTAM for NJE
   Configuring VTAM for RJE
Address
   Communication link parameters
   Configuring VTAM for NJE
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Interpreting RJE diagnostic data
   Job header general section
   Job header POWER section
   Job tab
   RJE concepts
   Troubleshooting: Communication scope characters
   Using LPR switches
   Using the LPR command line approach
   Writing to a TCP/IP socket
    BARR/RJE
    NJE SYSIN
    printer1
       Using LPR switches
       Using the LPR command line approach
    SYSOUT
Address-Recognized
Adds leading
ADEPT
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Learning about the Retain Window
   Learning about the Spool Window
   Overview TOOLS
   Overview TRANSFORM
   Transform Configuration dialog box
   Working with the INI file
ADEPT INI
    changes
ADEPT Job Configuration File Reference
Adept Studio
ADEPT Suite
   Common questions for BARR/TOOLS and BARR/TRANSFORMS
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Learning about the Retain Window
   Learning about the Spool Window
   Modules
   Overview BARR/TOOLS
   Overview BARR/TRANSFORM
   Splitting jobs
   Transform Configuration dialog box
   Working with inline Xerox resources
   Working with the INI file
ADEPT Suite CD
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
    Insert
       Getting started with BARR/TOOLS
       Getting started with BARR/TRANSFORM (ADEPT Suite)
Adjust
   Common questions for printers
   Common questions: Configuring BARR/RJE
   Data set header internal custom section
   Data set header output processing section
   Device Control tab
   Learning about the Spool Window
   Troubleshooting using RJE
   Using the Data Conversion Utility
   Working with page layouts
   Working with the INI file
    Line
    MAXDATA
Administrators
   Accounting tab
   Assigned user rights
   Available user rights
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Choosing the correct account type
   Common questions for Services
   Common questions for Spool Window
   Configuring BARR/NJE for BARR SNA
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring BARR/RJE optional settings
   Configuring the NJE auto-start feature (optional)
   Encrypting data
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with BARR/NJE
   Getting started with BARR/RJE
   Getting started with BARR/SPOOL
   Getting started with printers
   Learning about the Backup Configuration Utility window
   Learning about the RJE Configuration Utility window
   Learning about the User Rights window
   Managing services
   Manually configuring readers
   Manually sending the diagnostic file
   Opening and closing the BARR/NJE utility
   Opening and closing the BARR/RJE utility
   Operator and Advanced rights
   Overview BARR/NJE
   Overview BARR/RJE
   Overview User Rights Configuration utility
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BARR/SPOOL
   Sending jobs to the host
   SNA Configuration dialog box
   Spool Printers tab
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting Services
   Troubleshooting Viewer
   Troubleshooting: Managing connections
   Using the User Rights Configuration utility
   Working with BARR/RJE connections
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with spool printers
   Working with the accounting system
   Writing to a TCP/IP socket
   Writing to disk
    selecting
Adobe PDF
Advanced
   Advanced Node Settings dialog box
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Common questions for Make FCB
   Common questions for SPOOL
   Compressing data
   Configuring BARR/NJE for BARR SNA
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring the NJE auto-start feature (optional)
   Connecting to the host
   Data set header internal custom section
   Device Control tab
   Downloading host resources using NJE
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   Forms tab
   Getting help
   JES2 commands for RJE
   Learning about the HTML help window
   Learning about the Make FCB window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Managing spool printers
   Manually configuring readers
   Modifying a printer's device driver settings
   NJE Configuration dialog box
   Operator and Advanced rights
   Options tab
   Override Table tab
   Overview BHCS
   Overview Make FCB
   Overview Technical Support
   Passing data to the printer without conversion
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BARR/SPOOL
   Searching the Help
   Sending JCL files with an embedded command
   Sending jobs to the host
   Spool Printers tab
   Troubleshooting NJE
   Troubleshooting printers
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the FCB utility
   Using the Help
   Using the User Rights Configuration utility
   Using the Viewer
   Working with page layouts
   Working with printer initialization files
   Working with spool printers
   Writing to a TCP/IP socket
   Writing to disk
    select
Advanced Function Printer
    containing
Advanced Node Settings dialog
Advanced Node Settings dialog box
Advanced Printer Options dialog
Advanced Program-to-Program Communication
   Configuring the NJE auto-start feature (optional)
   Troubleshooting BARR/NJE
   Using BARR job for the NJE auto-start configuration
    Acronym
       Configuring the NJE auto-start feature (optional)
       Troubleshooting BARR/NJE
Advanced tab
   Advanced tab LPR port
   Enabling the 'Print directly to the printer' setting
   Modifying a printer's device driver settings
   Troubleshooting printers
AES
   Encrypting data
   Using the Data Conversion Utility
AES Rijndael
Afccu2
Affect
   Advanced Printer Options dialog box
   Assigning document attribute values
   Banner Options dialog box
   Choosing the correct account type
   Common questions for Spool Window
   Configuring RJE for HPR/IP (Enterprise Extender)
   Customizing the retain view
   Customizing the spool view
   Device Control tab
   Device Properties dialog box
   Enabling the 'Print directly to the printer' setting
   JES2 commands for NJE
   JES2 commands for RJE
   Learning about the Spool Window
   Managing spool documents
   Manually configuring readers
   Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
   Overlay Options dialog box
   Overview Make FCB
   Overview RJE
   Overview Technical Support
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Routing to another BHCS
   Sending jobs to the host
   Spool file processing
   Spool Printers tab
   Troubleshooting Configuration Utility
   Troubleshooting Operator Console
   Troubleshooting SPOOL
   Troubleshooting: Using BARR/RJE
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the Help
   Using the RJE Console
   Using the Viewer
   Working with banners
   Working with page layouts
   Working with spool printers
   Writing to a TCP/IP socket
   Writing to disk
    RJE
Affect printing
AFP
   Data set header general section
   Data set header internal custom section
   Data set header output processing section
   Data set header POWER section
   File and record formats
   Format tab
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Information on document status
   Learning about the Backup Configuration Utility window
   Learning about the Retain Window
   Learning about the Spool Window
   Managing spool documents
   Modules
   Overview Backup Configuration Utility
   Overview Diagnostics Utility
   Overview product
   Printing to a Windows printer
   Product features
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the PRT utility
   Version and trademark
   Working with spool printers
   Working with the INI file
    Copying
AFP Data Stream
   Data set header general section
   Data set header output processing section
   Data set header POWER section
   File and record formats
AFP Mixed Mode
Afp/.anj
Afp2PRRDCO
AFPDS
   Data set header general section
   Data set header output processing section
AFPLINEDATA
After
   Accounting tab
   Adding files to the spool
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Automatic Spooling tab
   Banner Options dialog box
   BARR information fields
   Barr Retain information fields
   Common questions for Print Utility
   Common questions for printers
   Common questions for Retain Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Communication link parameters
   Communications Profile tab
   Compressing data
   Configure Multiple Start Times dialog box
   Configuring BARR/RJE optional settings
   Configuring JES2 for NJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring the NJE auto-start feature using NetView (optional)
   Connection Control tab
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Downloading host resources using NJE
   Enabling and disabling the retain feature
   File and record formats
   File Options tab
   Format Columns dialog box
   Format tab
   Forms tab
   Getting started with LPD
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Import Override Table Files dialog box
   Installing the software
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   Job header general section
   Learning about JCL (SYSIN) jobs
   Learning about the Backup Configuration Utility window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Logmode table entry
   LPD tab
   Managing services
   Managing spool documents
   Manual Spooling tab
   Manually configuring readers
   Modifying a printer's device driver settings
   Modifying a printer's port settings
   Options dialog box Operator Console
   Output statements
   Overlay Options dialog box
   Overview Configuration Utility
   Overview Print Utility
   Overview Retain Window
   Overview Spool Window
   POWER commands for RJE
   Printing to a TCP/IP printer
   Redirecting print files (SYSOUT) to the host
   Remote definition
   Removing the Barr software
   Resource Folders tab
   Rules Editor dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Socket tab
   Special formats
   Splitting jobs
   Spool and Retain tab
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Transform Configuration dialog box
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the Help
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the Viewer
   Working with inline Xerox resources
   Working with LPD print queues
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with retained documents
   Working with RJE connections
   Writing to disk
After $HASP190
   Configuring RJE optional settings
   Forms tab
After BARR/RJE
   Connection Control tab
   Learning about the RJE Diagnostics window
After configuring
    printer
After correcting
After fixing printer
After frame
After printing
   BARR information fields
   Barr Retain information fields
   Common questions for Retain Window
   Data set header internal custom section
   Learning about the Retain Window
   Learning about the Spool Window
   Learning about the Viewer window
   Managing spool documents
   Overlay Options dialog box
   Redirecting print files (SYSOUT) to the host
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Spooling Properties dialog box
   Using the Viewer
   Working with retained documents
    document
After Printing commands
After responding
After sending
   Automatic Spooling tab
   Spooling Properties dialog box
After upgrading
AJ,RANGE
Alert
   Configuring the NJE auto-start feature using NetView (optional)
   Interpreting Barr Messages
   Learning about the Spool Window
    Barr SNA sends
    NetView detects
    VTAM
ALL
   Data set header output processing section
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for RJE
   Learning about the Backup Configuration Utility window
   POWER commands for RJE
   Rule Actions dialog box
   Working with override tables
All ASA
All Barr
   Advanced Printer Options dialog box
   Choosing ports and device drivers
   Overview Technical Support
   Using the PRT utility
ALL DD
All e-mail
All files
   Learning about the Backup Configuration Utility window
   Using BARR/TRAN
All NJE
ALL OPTUs
All SYSIN
   Customizing the retain view
   Customizing the spool view
   Data set header RCCS section
   Using the Add Sort Criteria Wizard
Allocate
   Communication link parameters
   Data set header general section
   Data set header POWER section
   Learning about JCL (SYSIN) jobs
   Remote definition
   Troubleshooting using RJE
    SYSOUT
Allows
   Advanced Node Settings dialog box
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Automatic Spooling tab
   Available user rights
   Barr SNA Configuration dialog box
   Choosing the correct account type
   Common questions for Print Utility
   Common questions for Spool Window
   Common questions for TCP/IP
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring BARR/RJE optional settings
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring VTAM for NJE
   Connecting to the host
   Content tab
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Define Page Layout dialog box
   Device Control tab
   Device Properties dialog box
   Enabling and disabling the retain feature
   Enabling the 'Print directly to the printer' setting
   File and record formats
   File Format tab File Port
   File Options tab
   File Properties dialog box
   Getting started with NJE
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Installing the software
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Job header accounting section
   Job header general section
   Job tab
   Learning about JCL (SYSIN) jobs
   Learning about the Diagnostics Utility window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the Spool Window
   Managing document rights
   Managing services
   Managing spool documents
   Modules
   Options dialog box Operator Console
   Options tab
   Overlay Options dialog box
   Override Table tab
   Overview NJE
   Overview RJE
   Overview services
   Overview TCP/IP
   Overview Technical Support
   Overview TOOLS
   POWER commands for NJE
   POWER commands for RJE
   Printer Groups tab
   Product features
   Remote definition
   RJE concepts
   Rule Actions dialog box
   Rule Conditions dialog box
   Searching the Help
   Splitting jobs
   Spool and Retain tab
   Supported RFC1179 features
   Troubleshooting BARR/NJE
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE connections
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the Operator Console
   Working with BARR/RJE connections
   Working with inline Xerox resources
   Working with overlays
   Working with spool printers
   Working with TCP/IP sockets
   Working with the INI file
    Barr
    Barr Host Communications Suite
       Advanced Printer Options dialog box
       Choosing the correct account type
    Barr spooler
    BARR/RJE
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
       Configuring BARR/RJE for MS/LUA
       Configuring BARR/RJE optional settings
       Working with BARR/RJE connections
ALT key
ALT+6
ALT+B
Alternate
   Capturing diagnostics
   Connecting to the host
   Customizing the retain view
   Customizing the spool view
   Downloading host resources using NJE
   Encrypting data
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Identifying Barr components
   JES2 commands for NJE
   JES2 commands for RJE
   Learning about the NJE Console window
   Learning about the Spool Window
   Locating diagnostic files
   Logmode table entry
   Printing to a Xerox printer
   Resource Folders tab
   Using the Data Conversion Utility
   Using the PRT utility
   Using the User Rights Configuration utility
   Working with overlays
   Working with the INI file
Alternate Values
Alternatively, BARR/NJE
AM
   Enabling and disabling the retain feature
   Managing spool documents
   Retain Start/End Date & Time dialog box
   Schedule Print Date and Time dialog box
   Working with retained documents
Amount
   Automatic Spooling tab
   Capturing diagnostics
   Choosing files to include in the diagnostics
   Common questions for Spool Window
   Communication link parameters
   Compressing data
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Disk Settings dialog box
   File and record formats
   HPR/IP Connection Configuration dialog box
   JES2 commands for RJE
   Learning about the Diagnostics Utility window
   Locating diagnostic files
   Logmode table entry
   Managing services
   Overview Diagnostics Utility
   Remote definition
   Using BARR job for the NJE auto-start configuration
   Using the Operator Console to gather diagnostics
    Reduced
       Capturing diagnostics
       Learning about the Diagnostics Utility window
       Locating diagnostic files
       Overview Diagnostics Utility
       Using BARR job for the NJE auto-start configuration
    Reduces
An format
   Sending JCL files with an embedded command
   Troubleshooting Print Utility
AND
   Common questions for the Configuration Utility
   Managing document rights
   Rule Conditions dialog box
   Searching the Help
   Using BARR/TRAN
   Working with override tables
    include
       Common questions for the Configuration Utility
       Managing document rights
       Working with override tables
AND printing
AND RECORDS
And/or
   Banner Options dialog box
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Installing the software
   Learning about the NJE Console window
   Managing spool documents
   Overview Technical Support
   Rule Actions dialog box
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Data Conversion Utility
   Version and trademark
   Working with override tables
    beginning
    formdef
    job’s
Anj
   File and record formats
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Managing spool documents
Annn
Annual Service Agreement
   Contacting Barr Systems
   Learning about the Spool Window
   Overview Technical Support
Another
   Adding files to the spool
   Advanced Printer Options dialog box
   Automatic Spooling tab
   Barr SNA Configuration dialog box
   Common questions for NJE
   Common questions for Print Utility
   Common questions for Services
   Common questions for SPOOL
   Communication Link tab
   Compressing data
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring POWER for NJE
   Configuring RJE optional settings
   Connecting to the host
   Data set header 3800 section
   Device Control tab
   Device Properties dialog box
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   File and record formats
   File Options tab
   Format tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Installing the software
   JES2 commands for NJE
   JES2 commands for RJE
   Job header general section
   Learning about JCL (SYSIN) jobs
   Learning about the NJE Console window
   Learning about the User Rights window
   Managing document rights
   Managing spool documents
   Operator commands for NJE
   Options dialog box Operator Console
   Options tab
   Overview BHCS
   Overview Retain Window
   Overview services
   Parsing a long header field into separate fields
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Product features
   RJE concepts
   Routing tab
   Routing to another BHCS
   Rule Actions dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Sending jobs to the host
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE Communication scope characters
   Troubleshooting SPOOL
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Help
   Using the Make Banner utility
   Using the Operator Console
   Using the PRT utility
   Using the User Rights Configuration utility
   Working with BARR/RJE connections
   Working with override tables
   Working with printer groups
   Working with printer initialization files
   Working with retained documents
   Working with spool printers
   Working with the accounting system
    Communications Suite
    program
Another SPOOL
ANSI
   Lines-per-form and lines-per-inch settings
   Using BARR/TRAN
    Variable-length
ANSI DEC
ANSI/ASA EBCDIC
Answer
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Operator Console
   Common questions for Print Utility
   Common questions for printers
   Common questions for Retain Window
   Common questions for RJE
   Common questions for Services
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for Technical Support
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Getting help
   Interpreting RJE diagnostic data
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the Spool Window
   Overview Technical Support
ANY
ANYLOCAL
    TSO
APA
Apache
Apache Software Foundation
    Copyright 1999-2000
Apache Software License
APF
   BARR$SN1 job
   BARR$SN2 job
   Using BARR job for the NJE auto-start configuration
    check
API
APPC
   Configuring the NJE auto-start feature (optional)
   Troubleshooting BARR/NJE
APPC,LU,ALL
APPC/MVS
   BARR$SN1 job
   Job header JES2 section
APPCPMxx
Append – Adds
Append Field
Append Field button
APPL
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Interpreting RJE diagnostic data
   Job tab
APPL MAJOR NODE
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
APPL statements
    names
Application generating
   Special formats
   Troubleshooting using RJE
    job
Application Programming Interface
   Troubleshooting NJE
   Troubleshooting printers
Applications
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring the NJE auto-start feature (optional)
   Device Properties dialog box
   File Options tab
   Format tab
   Installing the software
   IP Configuration tab
   JES2 commands for RJE
   Learning about the RJE Console window
   Logmode table entry
   Managing services
   Manually sending the diagnostic file
   Options tab
   Overview BHCS
   Overview RJE
   Overview Technical Support
   Overview TRANSFORM
   Remote definition
   RJE concepts
   RJE Description tab
   Special formats
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting using RJE
   Troubleshooting Viewer
   Troubleshooting: Managing connections
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Welcome
applications use
APPLID
   Configuring BARR/NJE for BARR SNA
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring VTAM for NJE
   RJE Description tab
   Troubleshooting BARR/NJE
   Troubleshooting: Managing connections
    JES2
    JES3
    match
    POWER
Apply
   Assigning document attribute values
   Banner Options dialog box
   Common questions for Make FCB
   Common questions for printers
   Common questions for SPOOL
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions: Using RJE
   Configuring TCP/IP and VTAM for HPR/IP
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Data set header security section
   File Options tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Job header security section
   Job trailer accounting section
   Learning about the RJE Configuration Utility window
   Managing document rights
   Managing spool documents
   Options tab
   Output statements
   Overlay Options dialog box
   Overview Technical Support
   Page Layout tab
   Parsing a long header field into separate fields
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BHCS
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Spool and Retain tab
   Spool file processing
   Tips for routing spool documents
   Transform Configuration dialog box
   Troubleshooting Configuration Utility
   Troubleshooting Make FCB
   Troubleshooting printers
   Troubleshooting SPOOL
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using the Add Sort Criteria Wizard
   Using the Help
   What's new in this release
   Working with banners
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with spool printers
   Writing to disk
    Select
    set
       Banner Options dialog box
       Overlay Options dialog box
    SYSOUT
Apply counter
APPNCOS
Approach
   Overview LP command line
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
    TCP/IP
Approach eliminates
    need
Appropriate
   Accounting tab
   Advanced Printer Options dialog box
   Assigned user rights
   BARR$SN1 job
   Common questions for Print Utility
   Common questions for Services
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Communications Profile tab
   Configure Multiple Start Times dialog box
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Device Control tab
   Disk Settings dialog box
   Downloading host resources using NJE
   Forms tab
   Getting started with SPOOL
   Learning about the Backup Configuration Utility window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   LPD tab
   Managing document rights
   Managing services
   Managing spool documents
   Managing spool printers
   Notes tab
   Opening and closing the Retain Window
   Opening and closing the Viewer utility
   Override Table tab
   Overview TCP/IP
   Overview User Rights Configuration utility
   Printing to a Windows printer
   Resource Folders tab
   Rule Actions dialog box
   Rule Conditions dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending JCL files with an embedded command
   Socket tab
   Splitting jobs
   Spool and Retain tab
   Spool Printers tab
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting Viewer
   Troubleshooting: Using BARR/RJE
   Using an override table to auto-assign header fields
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the FCB utility
   Using the NJE Console
   Using the RJE Diagnostics utility
   Using the User Rights Configuration utility
   Using the Viewer
   Working with notes
   Working with override tables
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Working with the INI file
    VTAM PU
Appropriate depending
   Overview TCP/IP
   Troubleshooting using RJE
APSIVP
ARC
Archive
   Advanced Printer Options dialog box
   Assigning document attribute values
   Compressing data
   Data set header internal custom section
   Encrypting data
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   Format tab
   Getting started with TOOLS
   Learning about the Backup Configuration Utility window
   Manually configuring readers
   Modules
   Options tab
   Overview Backup Configuration Utility
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BHCS
   Sending jobs to the host
   Spool file processing
   Using BARR/TRAN
   Using the Backup Configuration Utility
   Using the Operator Console
   Using the PRT utility
   Writing to a TCP/IP socket
   Writing to disk
Archive Version
Archived Configuration
   Learning about the Backup Configuration Utility window
   Using the Backup Configuration Utility
ARGV
AS/40
AS/400
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header output processing section
   Data set header RCCS section
   Job header general section
   Job trailer general section
   Overview product
   RJE concepts
   Version and trademark
    equal
AS/400 devType
AS/400 For
AS/400 SYSIN
AS/400s
   Modules
   Overview BARR/PRINT TCP/IP
   Welcome
   Working with TCP/IP sockets
AS400s
AS4nnnnn
ASA
   Common questions for BARR/NJE
   Common questions for BARR/PRINT TCP/IP
   Common questions: Using BARR/RJE
   Configuring BARR/RJE optional settings
   Content tab
   Data set header general section
   Data set header POWER section
   Device Properties dialog box
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Properties dialog box
   Format tab
   Headers From Data Configuration dialog box
   Learning about the Spool Window
   Output statements
   Overview BARR/PRINT to EPS
   Spool file processing
   Troubleshooting BARR/PRINT TCP/IP
   Troubleshooting Print Utility
   Using BARR/TRAN
   Using LPR switches
   Using the Data Conversion Utility
   Using the PRT utility
   Working with LPD print queues
    contain
       File Format tab File Port
       File Format tab IP Port
    contains
    control
       Common questions: Using BARR/RJE
       Data set header general section
       Spool file processing
    including
    leaving
ASA - Records
ASA Renewal dialog
    Displays
ASA Renewal Information
ASA2noFFPRRDCO
ASA2PRRDCO
ASA2PRRnoFF DCO
ASAFiles
Asc
   File and record formats
   Managing spool documents
   Overlay Options dialog box
   Using the PRT utility
   Working with overlays
   Working with printer initialization files
Ascending
ASCHPMxx
ASCII
   Adding files to the spool
   Advanced Printer Options dialog box
   Choosing ports and device drivers
   Common questions for BARR/NJE
   Common questions for BARR/PRINT TCP/IP
   Common questions for BARR/SPOOL
   Common questions for Print Utility
   Common questions for printers
   Common questions: Using BARR/RJE
   Configuring BARR/RJE optional settings
   Content tab
   Data set header general section
   Data set header internal custom section
   Device Properties dialog box
   Enhanced channel skip processing
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Properties dialog box
   Format tab
   Getting started with BARR/SPOOL
   Headers From Data Configuration dialog box
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Managing spool documents
   Modules
   Output statements
   Overview BARR/PRINT TCP/IP
   Overview Viewer
   Product features
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Special formats
   Spool file processing
   Supported RFC1179 features
   Troubleshooting BARR/PRINT TCP/IP
   Troubleshooting Configuration Utility
   Troubleshooting Make FCB
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting: Using BARR/RJE
   Using BARR/TRAN
   Using LPR switches
   Using the Data Conversion Utility
   Using the Viewer
   Welcome
   What's new in this release
   Working with LPD print queues
   Working with overlays
   Working with printer initialization files
   Writing to a TCP/IP socket
   Xerox file formats
    add
    back
    choose
       Sending files (JCL SYSIN) to the NJE host
       Sending files (JCL SYSIN) to the RJE host
    converts
    EBCDIC
       Common questions: Using BARR/RJE
       Format tab
       Sending JCL files with an embedded command
       Special formats
       Troubleshooting Print Utility
       Troubleshooting: Using BARR/RJE
       Working with overlays
    include
       File Format tab File Port
       File Format tab IP Port
    select
       Common questions for BARR/NJE
       Lines-per-form and lines-per-inch settings
    selected
    send
       Common questions for BARR/NJE
       Getting started with BARR/SPOOL
    Specifies
       File Format tab File Port
       File Format tab IP Port
    use
       Using BARR/TRAN
       Working with overlays
       Writing to a TCP/IP socket
ASCII-format
ASCII-to-EBCDIC
ASCII 31 31
    converts
ASCII ASA
ASCII CC 0x0D0C
ASCII file
   Common questions for BARR/NJE
   Common questions: Using BARR/RJE
   File Format tab File Port
   File Format tab IP Port
   Getting started with BARR/SPOOL
   Sending JCL files with an embedded command
   Using BARR/TRAN
   Using the Data Conversion Utility
   Xerox file formats
    contains
    Takes
ASCII FILE filename.ext
ASCII LF
ASCII/Latin-1
Ascii2DosAsciiDCO
Ascii2PRRDCO
AsciiDec2PRRDCO
ASCIItext
Assigned User Rights
   Assigned user rights
   Learning about the Spool Window
Assigning
   Assigned user rights
   Assigning document attribute values
   Common questions for BARR/NJE
   Learning about the User Rights window
    Different Barr Node
    document attribute values
Assigns
   Adding files to the spool
   Assigned user rights
   Assigning document attribute values
   Automatic Spooling tab
   Available user rights
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Capturing diagnostics
   Commands tab
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for TCP/IP
   Common questions: Configuring RJE
   Communicating with the NJE host
   Communicating with the RJE host
   Communications Profile tab
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring NJE for BARR SNA
   Configuring POWER for RJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Connecting to the host
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Encrypting data
   File Options tab
   File Properties dialog box
   Forms tab
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with NJE
   Getting started with RJE
   Getting started with SPOOL
   Interpreting RJE diagnostic data
   Job header general section
   Learning about JCL (SYSIN) jobs
   Learning about the Diagnostics Utility window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Locating diagnostic files
   LPD tab
   Managing document rights
   Manual Spooling tab
   Modifying a printer's device driver settings
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Operator and Advanced rights
   Operator commands for RJE
   Overview Configuration Utility
   Overview Make FCB
   Overview NJE
   Overview Print Utility
   Overview RJE
   Overview Spool Window
   Overview Technical Support
   Overview User Rights Configuration utility
   Parsing a long header field into separate fields
   Port Properties dialog box
   Printer Groups tab
   Printer Properties dialog box
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Receiving RJE jobs from the host
   Remote definition
   RJE Description tab
   Routing tab
   Rule Actions dialog box
   Rules Editor dialog box
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending jobs to the host
   Splitting jobs
   Spool Printers tab
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using an override table to auto-assign header fields
   Using BARR/TRAN
   Using the Data Conversion Utility
   Using the FCB utility
   Using the NJE Console
   Using the RJE Console
   Using the User Rights Configuration utility
   Working with LPD print queues
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with override tables
   Working with page layouts
   Working with Print Utility control files
   Working with printer groups
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Writing to disk
Associates
   Banner Options dialog box
   Channel Input Port dialog box
   Choosing the correct account type
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Operator Console
   Common questions for Print Utility
   Common questions for printers
   Common questions for Retain Window
   Common questions for RJE
   Common questions for Services
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for Technical Support
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Configuring JES2 for NJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Content tab
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Data set header RCCS section
   Data set header security section
   File and record formats
   Forms tab
   Interpreting Barr Messages
   Job header general section
   Job header security section
   Job tab
   Learning about the Retain Window
   Learning about the Spool Window
   Logmode table entry
   LPD header fields
   Managing spool documents
   Manually configuring readers
   Modules
   Options dialog box Operator Console
   Output statements
   Overlay Options dialog box
   Printer Properties dialog box
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Remote definition
   Routing tab
   Sending jobs to the host
   Spool file processing
   Spool Printers tab
   Transform Configuration dialog box
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting using RJE
   Troubleshooting Viewer
   Troubleshooting: Managing connections
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the Help
   Working with NJE routing tables
   Working with RJE connections
   Working with spool printers
   Working with the INI file
    PRINTi
At end
    job
At RJE
   Common questions: Managing connections
   Connection Control tab
At sites removed
At time
   Configuring RJE optional settings
   Connection Control tab
AT&T Bell Laboratories
   File Properties dialog box
   Modules
   Overview BARR/PRINT TCP/IP
   Overview LP command line
   Working with TCP/IP sockets
ATBSDFMU
Attached
   Enabling the 'Print directly to the printer' setting
   Getting help
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Logmode table entry
   Overview NJE
   RJE concepts
   Spool file processing
   Troubleshooting Make FCB
   Using the FCB utility
Attempt
   Assigned user rights
   Common questions for Print Utility
   Common questions: Configuring RJE
   Common questions: Managing connections
   Connection Control tab
   Data set header internal custom section
   Device Control tab
   Managing services
   Managing spool printers
   Overview services
   Overview User Rights Configuration utility
   Transform Configuration dialog box
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Working with RJE connections
    Barr Host Communications Suite
ATTEMPTING TO RECONNECT FOR MORE
ATTN
ATTR
Attribute blank
Attributes
   Adding files to the spool
   Assigning document attribute values
   Automatic Spooling tab
   Available user rights
   Channel Input Port dialog box
   Common questions for Print Utility
   Common questions for SPOOL
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Common questions: Using RJE
   Content tab
   Customizing the retain view
   Customizing the spool view
   Data set header output processing section
   Device Properties dialog box
   Enabling and disabling the retain feature
   File Properties dialog box
   Format Columns dialog box
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Information on document status
   Information on printer status
   JES2 commands for RJE
   Job tab
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the Spool Window
   LPD tab
   Managing document rights
   Managing spool documents
   Managing spool printers
   Manual Spooling tab
   Override Table tab
   Overview BHCS
   Overview Retain Window
   Overview services
   Overview Spool Window
   Port Properties dialog box
   Printing to a TCP/IP print queue
   Resource Folders tab
   Rule Actions dialog box
   Rules Editor dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Socket tab
   Splitting jobs
   Spooling Properties dialog box
   Tips for routing spool documents
   Transform Configuration dialog box
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Using an override table to auto-assign header fields
   Using BARR/TRAN
   Using LPR switches
   Using the Data Conversion Utility
   Using the LPR command line approach
   Using the PRT utility
   Using the Viewer
   Working with LPD print queues
   Working with override tables
   Working with Print Utility control files
   Working with retained documents
   Working with TCP/IP sockets
    DOS ASCII
    LPD
    TCP/IP
Attributes include
AUTH
    change
Authenticate
   Configuring NJE for BARR SNA
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Spool Window
    BARR
AUTHORIZED TO ADD
    CATALOGED PROCEDURE TO
Authorizing
    BARR/RJE
Auto
   Configuring JES3 for NJE
   Configuring RJE optional settings
   Connection Control tab
   Data set header internal custom section
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Learning about the RJE Console window
   Working with RJE connections
Auto-logon
Auto-start LU
   Configuring the NJE auto-start feature (optional)
   SNA Configuration dialog box
AUTO OFORMAT
AUTO SKIP
Autogen
   Configuring BARR/NJE for BARR SNA
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring TCP/IP and VTAM for HPR/IP
   Link tab HPR/IP
Automatic
   Adding files to the spool
   Assigning document attribute values
   Automatic Spooling tab
   Common questions for Print Utility
   Common questions for SPOOL
   Configuring RJE optional settings
   Device Control tab
   Device Properties dialog box
   Forms tab
   Managing document rights
   Managing services
   Options dialog box Operator Console
   Overview services
   Product features
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Spooling Properties dialog box
   Troubleshooting Services
   Troubleshooting using RJE
Automatic Spooling tab
Automatically Select
Automation Table
AUTOSTRT>HOSTINST
    Select
AUTOSTRT>HOSTINST file
AUTOTBL MEMBER
Auxiliary storage into
   Data set header POWER section
   Remote definition
Available
   Adding files to the spool
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Automatic Spooling tab
   Available user rights
   Barr SNA Configuration dialog box
   Chain Selection dialog box
   Channel Input Port dialog box
   Choosing ports and device drivers
   Choosing the correct account type
   Common questions for BARR/PRINT TCP/IP
   Common questions for Operator Console
   Common questions for printers
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Configuring RJE optional settings
   Configuring the spool to print to a Xerox printer
   Connecting to the host
   Content tab
   Customizing the retain view
   Customizing the spool view
   Device Control tab
   Device Properties dialog box
   Disk Settings dialog box
   Downloading host resources using NJE
   Enabling the 'Print directly to the printer' setting
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   File Properties dialog box
   Format Columns dialog box
   Format tab
   Forms tab
   Getting started with TRANSFORM (ADEPT Suite)
   Headers From Data Configuration dialog box
   Installing the software
   Interpreting Barr Messages
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for RJE
   Job tab
   Learning about the Backup Configuration Utility window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Modules
   Mount Forms dialog box
   Notes tab
   Options tab
   Output statements
   Overview NJE
   Overview services
   Overview SNA connectivity for NJE
   Overview Technical Support
   Printer Properties dialog box
   Product features
   RJE concepts
   RJE Description tab
   Routing to another BHCS
   Select Connection dialog box
   Select Header Fields dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Spool Printers tab
   System requirements
   Troubleshooting BARR/NJE
   Troubleshooting printers
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the Make Banner utility
   Using the NJE Console
   Using the Operator Console
   Using the RJE Console
   Using the User Rights Configuration utility
   Using the Viewer
   Working with inline Xerox resources
   Working with LPD print queues
   Working with notes
   Working with overlays
   Working with page layouts
   Working with spool printers
   Working with TCP/IP sockets
   Writing to a TCP/IP socket
   Writing to disk
Available Displays
Available Disk Space
   Disk Settings dialog box
   System requirements
Available during
Available list
    Granted list
Available user rights