Common questions for printers
Writing to a TCP/IP socket
Common questions for Print Utility
Common questions for TCP/IP
Configuring RJE optional settings
Data set header general section
Data set header internal custom section
Data set header POWER section
Device Properties dialog box
File and record formats
File Format tab File Port
File Format tab IP Port
Format tab
Installing the software
Job header general section
Overview BARR/PRINT TCP/IP
Overview BARR/PRINT to EPS
Product features
Special formats
Troubleshooting TCP/IP
Using BARR/TRAN
Using the Data Conversion Utility
Working with overlays
Common questions for Print Utility
Configuring BARR/RJE optional settings
Data set header general section
Device Properties dialog box
File and record formats
File Format tab File Port
File Format tab IP Port
Format tab
Overview BARR/PRINT to EPS
Overview TCP/IP
Special formats
Troubleshooting BARR/PRINT TCP/IP
Using BARR/TRAN
Using the Data Conversion Utility
Working with overlays
Data set header LPD/user custom section
Job tab
Advanced Node Settings dialog box
Barr SNA Configuration dialog box
Common questions for Make FCB
Common questions for NJE
Common questions for Print Utility
Common questions for printers
Common questions for TCP/IP
Common questions: Using RJE
Communication link parameters
Communication Link tab
Configuring TCP/IP and VTAM for HPR/IP
Device Control tab
Device Properties dialog box
File and record formats
File Format tab IP Port
Format tab
Getting started using a Barr SNA connection
Getting started with RJE
Getting started with SPOOL
Interpreting RJE diagnostic data
JES2 commands for RJE
Learning about JCL (SYSIN) jobs
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Manually configuring readers
Operator commands for NJE
Options dialog box Operator Console
Options tab
Overview Make FCB
Overview NJE
Overview RJE
Overview services
Overview SNA connectivity for NJE
Overview TCP/IP
Parsing a long header field into separate fields
Product features
RJE concepts
RJE Description tab
Sending JCL files with an embedded command
Sending jobs to the host
Spool file processing
Troubleshooting NJE
Troubleshooting printers
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR/TRAN
Welcome
Working with TCP/IP sockets
Xerox file formats
Manually configuring readers
Sending JCL files with an embedded command
Sending jobs to the host
Spool file processing
Troubleshooting printers
Learning about the RJE Console window
RJE Description tab
Common questions for BARR/PRINT TCP/IP
Format tab
Getting started using a Barr SNA connection
RJE concepts
Troubleshooting NJE
Welcome
What's new in this release
Configuring TCP/IP and VTAM for HPR/IP
RJE Description tab
Available user rights
BARR$SN1 job
Common questions for Make FCB
Common questions for NJE
Common questions for Print Utility
Common questions for printers
Common questions for Spool Window
Common questions for TCP/IP
Common questions for TRANSFORMS
Common questions: Using RJE
Configure Multiple Start Times dialog box
Configuring JES2 for NJE
Configuring JES3 for NJE
Configuring POWER for NJE
Configuring RJE for MS/LUA
Configuring the NJE auto-start feature using NetView (optional)
Connecting to the host
Connection Control tab
Customizing the retain view
Customizing the spool view
Data set header general section
Determining the communication paths
Getting started with Make Banner
Getting started with NJE
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Insert Field dialog box
Installing the software
Interpreting RJE diagnostic data
JES2 commands for NJE
JES2 commands for RJE
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the Spool Window
Learning about the Viewer window
Lines-per-form and lines-per-inch settings
Logmode table entry
Managing spool documents
Managing spool printers
Manual Spooling tab
Opening and closing the Make Banner utility
Opening and closing the Make FCB utility
Opening and closing the RJE utilities
Options dialog box Operator Console
Overview BARR/PRINT to EPS
Overview BHCS
Overview Make Banner
Overview Make FCB
Overview Retain Window
Overview services
Overview Spool Window
Overview Technical Support
Parsing a long header field into separate fields
Receiving RJE jobs from the host
RJE Description tab
Special formats
Spool and Retain tab
Spool file processing
Supported RFC1179 features
Transform Configuration dialog box
Troubleshooting Configuring RJE
Troubleshooting Make FCB
Troubleshooting NJE
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting RJE Communication scope characters
Troubleshooting Services
Troubleshooting SPOOL
Troubleshooting using RJE
Troubleshooting: Managing connections
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Using the FCB utility
Using the Help
Using the Make Banner utility
Using the RJE Console
Using the RJE Diagnostics utility
Using the Viewer
What's new in this release
Working with retained documents
Working with spool printers
Working with the accounting system
Working with the INI file
Available user rights
Common questions for BARR/PRINT TCP/IP
Getting started with Make Banner
Insert Field dialog box
Learning about the Make Banner window
Learning about the Spool Window
Opening and closing the Make Banner utility
Options dialog box Operator Console
Overview Make Banner
Overview services
Using the Make Banner utility
Common questions for TCP/IP
Learning about the Make Banner window
Opening and closing the Make Banner utility
Using the Make Banner utility
Available user rights
Common questions for Make FCB
Learning about the Make FCB window
Learning about the Spool Window
Lines-per-form and lines-per-inch settings
Opening and closing the Make FCB utility
Options dialog box Operator Console
Overview Make FCB
Overview services
Troubleshooting Make FCB
Troubleshooting printers
Troubleshooting: Using BARR/RJE
Using the FCB utility
Using the RJE Console
Common questions for Make FCB
Learning about the Make FCB window
Opening and closing the Make FCB utility
Troubleshooting printers
Troubleshooting using RJE
Using the FCB utility
Available user rights
Choosing the correct account type
Communication Link tab
Configuring NJE for BARR SNA
Configuring VTAM for NJE
Data set header LPD/user custom section
Learning about the User Rights window
Lines-per-form and lines-per-inch settings
Logmode table entry
Operator and Advanced rights
Operator commands for NJE
Operator commands for RJE
Overview NJE
Overview RJE
Overview SNA connectivity for NJE
Product features
Spool file processing
Troubleshooting RJE connections
Welcome
Data set header LPD/user custom section
Lines-per-form and lines-per-inch settings
Learning about the RJE Connection Manager window
Overview RJE
Using the RJE Connection Manager
Managing document rights
Managing services
Managing spool documents
Overview services
Rules Editor dialog box
Working with override tables
Adding files to the spool
Commands tab
Common questions for BARR/PRINT to EPS
Common questions for Print Utility
Common questions for SPOOL
Configuring JES3 for NJE
Configuring POWER for NJE
Configuring RJE optional settings
File and record formats
Forms tab
Installing the software
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Lines-per-form and lines-per-inch settings
Managing document rights
Managing services
Manual Spooling tab
Operator commands for NJE
Operator commands for RJE
Overview RJE
Overview services
Overview TCP/IP
Remote definition
Spooling Properties dialog box
Troubleshooting NJE
Troubleshooting Services
Using BARR/TRAN
Welcome
What's new in this release
Working with page layouts
Working with the INI file
Overview RJE
Welcome
What's new in this release
Adding files to the spool
Common questions for Print Utility
Common questions for Services
Common questions for SPOOL
Compressing data
Configuring POWER for NJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring the spool to print to a Xerox printer
Connecting to the host
Connection Control tab
Customizing the retain view
Device Control tab
File Options tab
Forms tab
Getting started with LPD
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Installing the software
Learning about the Diagnostics Utility window
Learning about the RJE Console window
Lines-per-form and lines-per-inch settings
Managing document rights
Manual Spooling tab
Manually configuring readers
Manually sending the diagnostic file
Options dialog box Operator Console
Overview BHCS
Overview Make FCB
Overview Print Utility
Overview services
Preferences tab
Printing to a Xerox printer
Removing the Barr software
RJE Description tab
Rule Conditions dialog box
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Splitting jobs
Spool and Retain tab
Troubleshooting Configuration Utility
Troubleshooting printers
Troubleshooting Services
Troubleshooting Spool Window
Troubleshooting TCP/IP
Using BARR job for the NJE auto-start configuration
Working with LPD print queues
Working with NJE routing tables
Working with override tables
Working with spool printers
Writing to a TCP/IP socket
Writing to disk
Adding files to the spool
Compressing data
Manually configuring readers
Sending files (JCL SYSIN) to the RJE host
Adding files to the spool
Compressing data
Sending files (JCL SYSIN) to the RJE host
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Adding files to the spool
Common questions for Print Utility
Manually sending the diagnostic file
Printing to a TCP/IP printer
Printing to a Windows printer
Sending jobs to the host
Common questions for printers
Using the Help
Working with page layouts
Advanced Printer Options dialog box
Assigning document attribute values
Channel Input Port dialog box
Common questions for BARR/PRINT TCP/IP
Common questions for Make FCB
Common questions for Print Utility
Communication link parameters
Compressing data
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring JES2 for NJE
Configuring JES3 for NJE
Configuring POWER for NJE
Configuring TCP/IP and VTAM for HPR/IP
Configuring the NJE auto-start feature (optional)
Configuring the spool to print to a Xerox printer
Configuring VTAM for NJE
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Data set header general section
Data set header LPD/user custom section
Device Control tab
Device Properties dialog box
Downloading host resources using NJE
Encrypting data
File and record formats
Forms tab
Getting started using a Barr SNA connection
Getting started using an SNA connection
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
HPR/IP Connection Configuration dialog box
Information on document status
Interpreting RJE diagnostic data
JES2 commands for NJE
JES2 commands for RJE
Learning about JCL (SYSIN) jobs
Learning about the Make Banner window
Learning about the Retain Window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Link tab HPR/IP
Logmode table entry
Managing spool documents
Managing spool printers
Overlay Options dialog box
Overview BHCS
Overview Retain Window
Overview Spool Window
Receiving RJE jobs from the host
Redirecting print files (SYSOUT) to the host
Remote definition
RJE Description tab
Routing to another BHCS
Rule Actions dialog box
Rule Conditions dialog box
Searching the Help
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Spool and Retain tab
Tips for routing spool documents
Transform Configuration dialog box
Troubleshooting BARR/NJE
Troubleshooting BARR/PRINT TCP/IP
Troubleshooting Configuration Utility
Troubleshooting Configuring RJE
Troubleshooting Make FCB
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting RJE connections
Troubleshooting: Using BARR/RJE
Using an override table to auto-assign header fields
Using BARR job for the NJE auto-start configuration
Using the Data Conversion Utility
Using the FCB utility
Using the Help
Using the Operator Console
Using the RJE Diagnostics utility
Using the Viewer
Working with NJE routing tables
Working with overlays
Working with override tables
Working with page layouts
Working with printer groups
Working with retained documents
Working with spool printers
Working with the INI file
Logmode table entry
RJE Description tab
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
HPR/IP Connection Configuration dialog box
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring JES2 for NJE
Configuring JES3 for NJE
Configuring POWER for NJE
Configuring VTAM for NJE
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Customizing the retain view
Spool and Retain tab
BARR$SN1 job
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Configuring VTAM for NJE
Locating diagnostic files
Trace tab HPR/IP
Common questions: Configuring BARR/RJE
Communication link parameters
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring TCP/IP and VTAM for HPR/IP
Configuring VTAM for NJE
Configuring VTAM for RJE
HPR/IP Connection Configuration dialog box
Remote definition
Troubleshooting: Configuring BARR/RJE
Troubleshooting: Using BARR/RJE
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Communication link parameters
Configuring VTAM for NJE
HPR/IP Connection Configuration dialog box
Remote definition
Troubleshooting: Using BARR/RJE
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Common questions: Configuring RJE
Common questions: Using RJE
Communication link parameters
Configuring BARR/RJE optional settings
Configuring JES2 for NJE
Configuring JES3 for NJE
Configuring NJE for BARR SNA
Configuring POWER for NJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring VTAM for NJE
Configuring VTAM for RJE
Connection Control tab
Data set header general section
Data set header internal custom section
Data set header RCCS section
Device Control tab
Device Properties dialog box
File Options tab
Format tab
HPR/IP Connection Configuration dialog box
Insert Field dialog box
Learning about the Make Banner window
Learning about the Retain Window
Learning about the Spool Window
Link tab HPR/IP
Managing spool documents
Options tab
Output statements
Overview Retain Window
Overview TCP/IP
Page Layout tab
Product features
Remote definition
Select Header Fields dialog box
Sending JCL files with an embedded command
Special formats
Trace tab HPR/IP
Troubleshooting RJE connections
Troubleshooting Spool Window
Troubleshooting: Using BARR/RJE
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Make Banner utility
Using the PRT utility
Using the RJE Console
Working with retained documents
Working with the accounting system
Common questions: Configuring BARR/RJE
Troubleshooting: Configuring BARR/RJE
Troubleshooting: Using BARR/RJE
Troubleshooting: Configuring BARR/RJE
Troubleshooting: Using BARR/RJE
Connection Control tab
Disk Settings dialog box
System requirements
Trace tab HPR/IP
Using the Operator Console
Using the RJE Console
Communication link parameters
Configuring TCP/IP and VTAM for HPR/IP
Data set header internal custom section
Overview Technical Support
RJE concepts
Troubleshooting NJE
Xerox file formats
Job header general section
Learning about the NJE Console window
Set Destination Node dialog box
Using the NJE Console
Common questions: Using RJE
Data set header POWER section
Remote definition
System requirements
Troubleshooting printers
Troubleshooting using RJE
Assigned user rights
BARR information fields
Common questions for Make FCB
Common questions for printers
Common questions for Services
Common questions for TCP/IP
Common questions for TRANSFORMS
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring BARR/RJE optional settings
Configuring the spool to print to a Xerox printer
Connecting to the host
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Display Properties tab
Enabling and disabling the retain feature
File and record formats
Format Columns dialog box
Getting help
Getting started with SPOOL
Identifying Barr components
Interpreting RJE diagnostic data
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the Viewer window
Managing services
Managing spool documents
Managing spool printers
Mount Forms dialog box
Opening and closing the Configuration Utility
Opening and closing the Diagnostics Utility
Opening and closing the Make Banner utility
Opening and closing the Make FCB utility
Opening and closing the NJE utilities
Opening and closing the Operator Console utility
Opening and closing the Print Utility
Opening and closing the Retain Window
Opening and closing the RJE utilities
Opening and closing the Spool Window utility
Opening and closing the TCP/IP Configuration utility
Opening and closing the Viewer utility
Overview Technical Support
Preferences tab
Select Connection dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Troubleshooting NJE
Troubleshooting printers
Troubleshooting Viewer
Using BARR job for the NJE auto-start configuration
Using the Add Sort Criteria Wizard
Using the Backup Configuration Utility
Using the FCB utility
Using the Help
Using the Make Banner utility
Using the NJE Console
Using the Operator Console
Using the Operator Console to gather diagnostics
Using the RJE Console
Using the RJE Diagnostics utility
Using the Viewer
Working with BARR/RJE connections
Working with retained documents
BARR information fields
Format Columns dialog box
Learning about the Spool Window
Getting help
Overview Technical Support
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring BARR/RJE optional settings
Working with BARR/RJE connections
Managing spool documents
Managing spool printers
Merge Override Table Files dialog box
Override Table tab
Working with inline Xerox resources
Working with override tables
Advanced Printer Options dialog box
Automatic Spooling tab
Available user rights
Capturing a TCP/IP socket trace
Capturing an LPD trace
Common questions for NJE
Common questions for Operator Console
Common questions for printers
Common questions for Services
Common questions for Spool Window
Common questions for TCP/IP
Common questions for TRANSFORMS
Common questions: Configuring RJE
Common questions: Using RJE
Communicating with the NJE host
Configuring JES2 for NJE
Configuring JES3 for NJE
Configuring NJE for BARR SNA
Configuring POWER for NJE
Configuring RJE optional settings
Configuring the NJE auto-start feature using NetView (optional)
Configuring VTAM for NJE
Connecting to the host
Connection Control tab
Customizing the spool view
Data set header general section
Data set header RSCS section
Device Control tab
Device Properties dialog box
Display Properties tab
Enabling the 'Print directly to the printer' setting
Encrypting data
Forms tab
Getting help
HPR/IP Connection Configuration dialog box
Interpreting Barr Messages
Interpreting RJE diagnostic data
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for RJE
Job header general section
Job header POWER section
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Locating diagnostic files
Logmode table entry
LPD header fields
LPD tab
Managing services
Managing spool printers
Manually configuring readers
Manually sending the diagnostic file
Opening and closing the RJE utilities
Options dialog box Operator Console
Options tab
Output statements
Overview Diagnostics Utility
Overview NJE
Overview Operator Console
Overview RJE
Overview services
Overview SNA connectivity for NJE
POWER commands for RJE
Preferences tab
Printer Properties dialog box
Printing to a TCP/IP print queue
Printing to a Xerox printer
Remote definition
RJE concepts
RJE Description tab
Routing to another BHCS
Select Connection dialog box
Sending jobs to the host
Set Destination Node dialog box
Socket tab
Spooling Properties dialog box
Troubleshooting Configuring RJE
Troubleshooting Operator Console
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting RJE Communication scope characters
Troubleshooting RJE connections
Troubleshooting SPOOL
Troubleshooting Spool Window
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Backup Configuration Utility
Using the NJE Console
Using the Operator Console
Using the Operator Console to gather diagnostics
Using the RJE Console
Working with LPD print queues
Working with NJE routing tables
Working with RJE connections
Working with the accounting system
Writing to a TCP/IP socket
Writing to disk
Interpreting RJE diagnostic data
Learning about the RJE Diagnostics window
Interpreting RJE diagnostic data
Learning about the RJE Diagnostics window
Learning about the Operator Console window
Using the Operator Console
Common questions for printers
Learning about the Operator Console window
Common questions for Print Utility
Data set header internal custom section
Device Properties dialog box
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Information on document status
Learning about the Spool Window
Modules
Overview BARR/PRINT to EPS
Overview BARR/TOOLS
Product features
Spool file processing
Troubleshooting BARR/PRINT TCP/IP
Using the PRT utility
Working with overlays
Xerox file formats
Remote definition
Troubleshooting: Receiving jobs from the host
Choosing ports and device drivers
Common questions for Spool Window
Configure Multiple Start Times dialog box
Configuring RJE for MS/LUA
Connection Control tab
Determining the communication paths
File Options tab
Learning about the RJE Diagnostics window
Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
Overview NJE
Overview RJE
Overview services
Overview SNA connectivity for NJE
Overview Technical Support
SNA Configuration dialog box
Spool file processing
System requirements
Troubleshooting BARR/SPOOL
Troubleshooting Make FCB
Troubleshooting NJE
Troubleshooting TCP/IP
Troubleshooting Viewer
Using the Help
Using the NJE Console
Using the RJE Diagnostics utility
Version and trademark
Configure Multiple Start Times dialog box
Learning about the RJE Diagnostics window
Troubleshooting: Using BARR/RJE
Using the NJE Console
Using the RJE Diagnostics utility
Determining the communication paths
Overview BARR/NJE
Overview BARR/RJE
Configuring RJE for MS/LUA
Determining the communication paths
Learning about the RJE Diagnostics window
Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
Overview NJE
Overview RJE
Overview SNA connectivity for NJE
SNA Configuration dialog box
Troubleshooting BARR/NJE
Using the NJE Console
Using the RJE Diagnostics utility
Configuring BARR/RJE for MS/LUA
Determining the communication paths
Learning about the RJE Diagnostics window
Overview BARR/NJE
Overview BARR/RJE
Overview SNA connectivity for NJE
SNA Configuration dialog box
Troubleshooting BARR/NJE
Using the NJE Console
Using the RJE Diagnostics utility
Determining the communication paths
Overview BARR/NJE
Overview BARR/RJE
Troubleshooting BARR/NJE
Getting started with LPD
Getting started with TCP/IP sockets
Troubleshooting BARR/PRINT TCP/IP
File Options tab
Overview services
Common questions for Spool Window
Connection Control tab
Spool file processing
Troubleshooting Viewer
Configuring BARR/RJE optional settings
Device Control tab
Disk Settings dialog box
Getting started with Make Banner
Getting started with SPOOL
Overview Technical Support
Remote definition
Splitting jobs
Spool and Retain tab
System requirements
Using the FCB utility
Configuring BARR/RJE optional settings
Splitting jobs
Adding files to the spool
Common questions for NJE
Common questions for Print Utility
Common questions for Spool Window
Common questions for TCP/IP
Connection Control tab
Enabling and disabling the retain feature
Job header POWER section
Managing spool documents
Managing spool printers
Overview Technical Support
Retain Start/End Date & Time dialog box
Schedule Print Date and Time dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Spooling Properties dialog box
Using BARR/TRAN
Common questions for BARR/NJE
Managing spool printers
Splitting jobs
Spool and Retain tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Common questions: Using BARR/RJE
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring POWER for RJE
Configuring VTAM for NJE
Logmode table entry
RJE Description tab
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring POWER for RJE
Logmode table entry
RJE Description tab
Interpreting RJE diagnostic data
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Learning about the RJE Diagnostics window
Logmode table entry
Overview BARR/RJE
Overview SNA connectivity for NJE
Overview Technical Support
RJE concepts
Communication link parameters
Configuring VTAM for NJE
Data set header 3800 section
Data set header general section
Data set header internal custom section
Data set header LPD/user custom section
Data set header output processing section
Data set header RCCS section
Data set header security section
Job header accounting section
Job header security section
Job trailer accounting section
Job trailer general section
Adding files to the spool
Advanced Printer Options dialog box
Assigning document attribute values
Automatic Spooling tab
Available user rights
Barr SNA Configuration dialog box
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Commands tab
Common questions for BARR/SPOOL
Common questions for Print Utility
Common questions for Spool Window
Common questions for the Configuration Utility
Common questions: Configuring BARR/RJE
Common questions: Managing connections
Communication Link tab
Communications Profile tab
Compressing data
Configure Multiple Start Times dialog box
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring BARR/RJE optional settings
Connection Configuration dialog box
Connection Control tab
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Define Page Layout dialog box
Device Properties dialog box
Downloading host resources using NJE
Enabling and disabling the retain feature
Encrypting data
File Properties dialog box
Format tab
Getting started with BARR/TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Import Override Table Files dialog box
Information on document status
Information on printer status
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Job header general section
Learning about the Make FCB window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the Spool Window
Learning about the User Rights window
Link tab HPR/IP
Locating diagnostic files
Logmode table entry
LPD tab
Managing document rights
Managing spool documents
Managing spool printers
Manual Spooling tab
Manually configuring readers
Modifying a printer's device driver settings
Modifying a printer's port settings
Modifying the default spool folders
NJE Configuration dialog box
Operator and Advanced rights
Options tab
Override Table tab
Overview NJE
Overview RJE
Overview Spool Window
Overview User Rights Configuration utility
Page Layout tab
Passing data to the printer without conversion
Port Properties dialog box
POWER commands for NJE
POWER commands for RJE
Printer Properties dialog box
Printing to a TCP/IP print queue
Printing to a Xerox printer
RJE Description tab
Routing tab
Routing to another BHCS
Rule Actions dialog box
Rule Conditions dialog box
Rules Editor dialog box
Sending jobs to the host
SNA Configuration dialog box
Socket tab
Spool Printers tab
Spooling Properties dialog box
Troubleshooting BARR/NJE
Troubleshooting Configuration Utility
Troubleshooting NJE Console
Troubleshooting printers
Troubleshooting TCP/IP
Troubleshooting Viewer
Troubleshooting: Managing connections
Troubleshooting: Using BARR/RJE
Using an override table to auto-assign header fields
Using BARR/TRAN
Using the Data Conversion Utility
Using the FCB utility
Using the Make Banner utility
Using the User Rights Configuration utility
Using the Viewer
Working with BARR/RJE connections
Working with LPD print queues
Working with NJE connections
Working with NJE profiles
Working with NJE routing tables
Working with override tables
Working with page layouts
Working with Print Utility control files
Working with printer groups
Working with printer initialization files
Working with retained documents
Working with spool printers
Working with TCP/IP sockets
Working with the accounting system
Writing to a TCP/IP socket
Writing to disk
Link tab HPR/IP
Spooling Properties dialog box
File Properties dialog box
Working with LPD print queues
Working with LPD print queues
Working with TCP/IP sockets
Printer Properties dialog box
Printing to a TCP/IP print queue
Printing to a Xerox printer
Routing to another BARR/SPOOL
Working with spool printers
Writing to a TCP/IP socket
Writing to disk
Working with LPD print queues
Working with TCP/IP sockets
JES3 commands for NJE
JES3 commands for RJE
Learning about the Operator Console window
Options dialog box Operator Console
Using the Operator Console
Using the Operator Console to gather diagnostics
Learning about the Operator Console window
Overview services
Spool file processing
Common questions for printers
Learning about the Operator Console window
Modules
Overview BARR/RJE
Interpreting RJE diagnostic data
Learning about the RJE Diagnostics window
Using the RJE Diagnostics utility
Accounting tab
Adding files to the spool
Advanced Node Settings dialog box
Advanced Printer Options dialog box
Advanced tab LPR port
Assigning document attribute values
Automatic Spooling tab
Available user rights
Banner Options dialog box
Barr SNA Configuration dialog box
Chain Selection dialog box
Choosing files to include in the diagnostics
Commands tab
Common questions for Make FCB
Common questions for Operator Console
Common questions for Print Utility
Common questions for printers
Common questions for Spool Window
Common questions for TCP/IP
Common questions: Configuring RJE
Common questions: Using RJE
Communication link parameters
Communication Link tab
Communications Profile tab
Configure Multiple Start Times dialog box
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring JES2 for NJE
Configuring JES2 for RJE
Configuring JES3 for NJE
Configuring JES3 for RJE
Configuring POWER for NJE
Configuring POWER for RJE
Configuring RJE optional settings
Configuring the host for Barr SNA or SNA
Configuring the NJE auto-start feature (optional)
Connecting to the host
Connection Configuration dialog box
Connection Control tab
Contacting Barr Systems
Content tab
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Data set header general section
Data set header internal custom section
Data set header LPD/user custom section
Data set header RCCS section
Data set header RSCS section
Define Page Layout dialog box
Device Control tab
Device Properties dialog box
Disk Settings dialog box
Display Properties tab
Enhanced channel skip processing
File and record formats
File Format tab File Port
File Format tab IP Port
File Options tab
File Properties dialog box
Format Columns dialog box
Format tab
Forms command strings
Forms tab
Getting help
Getting started with printers
Getting started with RJE
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Headers From Data Configuration dialog box
Import Override Table Files dialog box
Insert Field dialog box
Interpreting Barr Messages
Interpreting RJE diagnostic data
IP Configuration tab
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Job tab
Learning about JCL (SYSIN) jobs
Learning about the Backup Configuration Utility window
Learning about the Diagnostics Utility window
Learning about the HTML help window
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the User Rights window
Lines-per-form and lines-per-inch settings
Link tab HPR/IP
LPD tab
Managing document rights
Managing services
Managing spool documents
Managing spool printers
Manual Spooling tab
Manually sending the diagnostic file
Merge Override Table Files dialog box
Modifying the default spool folders
Modules
Mount Forms dialog box
NJE Configuration dialog box
Notes tab
Operator and Advanced rights
Operator commands for NJE
Operator commands for RJE
Options tab
Overlay Options dialog box
Override Table tab
Overview BHCS
Overview Header fields
Overview LPR
Overview NJE
Overview services
Overview TCP/IP
Overview Technical Support
Overview TOOLS
Overview TRANSFORM
Page Layout tab
Port Properties dialog box
Preferences tab
Printer Groups tab
Printer Properties dialog box
Product features
Removing the Barr software
Resource Folders tab
Retain Start/End Date & Time dialog box
RJE concepts
RJE Description tab
Routing tab
Rule Conditions dialog box
Rules Editor dialog box
Schedule Print Date and Time dialog box
Searching the Help
Select Code Pages dialog box
Select Connection dialog box
Select Header Fields dialog box
Sending JCL files with an embedded command
Set Destination Node dialog box
SNA Configuration dialog box
Socket tab
Splitting jobs
Spool and Retain tab
Spool file processing
Spool Printers tab
Spooling Properties dialog box
Tell me about printers
Trace tab HPR/IP
Transform Configuration dialog box
Troubleshooting Configuring RJE
Troubleshooting NJE
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting SPOOL
Troubleshooting Spool Window
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Using the Help
Using the Make Banner utility
Using the NJE Console
Using the Operator Console
Using the RJE Console
Using the RJE Diagnostics utility
Using the Viewer
Welcome
What's new in this release
Working with BARR/RJE connections
Working with overlays
Working with override tables
Working with retained documents
Working with spool printers
Working with the INI file
Xerox file formats
Getting started with BARR/RJE
Overview BARR/NJE
Data set header LPD/user custom section
Lines-per-form and lines-per-inch settings
Spool file processing
Data set header LPD/user custom section
Lines-per-form and lines-per-inch settings
Job tab
Troubleshooting BARR/PRINT TCP/IP
File and record formats
Special formats
Using BARR/TRAN
Common questions: Using BARR/RJE
Configuring BARR/RJE optional settings
Device Control tab
Forms command strings
Forms tab
Learning about the RJE Console window
Mount Forms dialog box
Troubleshooting: Using BARR/RJE
Using the RJE Console
Common questions: Using BARR/RJE
Configuring RJE optional settings
Forms tab
Learning about the RJE Console window
Mount Forms dialog box
Using the RJE Console
Adding files to the spool
Automatic Spooling tab
Capturing diagnostics
Common questions for Make FCB
Common questions for Print Utility
Common questions for Retain Window
Common questions for TCP/IP
Common questions: Using RJE
Configuring RJE optional settings
Configuring the spool to print to a Xerox printer
Connection Control tab
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Data set header general section
Device Control tab
Downloading host resources using NJE
Format Columns dialog box
Forms tab
Installing the software
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the User Rights window
Learning about the Viewer window
Locating diagnostic files
Overview Make FCB
POWER commands for NJE
POWER commands for RJE
Resource Folders tab
Select Header Fields dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Spool and Retain tab
Spool file processing
Spooling Properties dialog box
Troubleshooting SPOOL
Troubleshooting TCP/IP
Troubleshooting Viewer
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Using the FCB utility
Using the Make Banner utility
Using the User Rights Configuration utility
Working with NJE routing tables
Working with retained documents
Working with RJE connections
Working with the accounting system
Common questions for BARR/PRINT TCP/IP
Configuring the spool to print to a Xerox printer
Customizing the retain view
Customizing the spool view
Format Columns dialog box
Select Header Fields dialog box
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Working with the accounting system
Format Columns dialog box
Select Header Fields dialog box
Automatic Spooling tab
Capturing diagnostics
Common questions for Make FCB
Common questions for Print Utility
Common questions for Retain Window
Device Control tab
Downloading host resources using NJE
Forms tab
Learning about the Make FCB window
Locating diagnostic files
Overview Make FCB
Resource Folders tab
Spool and Retain tab
Spooling Properties dialog box
Using the FCB utility
Common questions for BARR/PRINT TCP/IP
Configuring the spool to print to a Xerox printer
Customizing the retain view
Customizing the spool view
Format Columns dialog box
Select Header Fields dialog box
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Working with the accounting system
Format Columns dialog box
Select Header Fields dialog box
Automatic Spooling tab
Common questions for Print Utility
Spooling Properties dialog box
Common questions for BARR/SPOOL
Common questions for NJE
Common questions for Services
Troubleshooting Configuration Utility
Troubleshooting printers
Using the Backup Configuration Utility
Using the LPQ command line approach
Using the LPR command line approach
Using the LPRM command line approach
Using the PRT utility
Common questions for Services
Troubleshooting Configuration Utility
Configuring BARR/RJE for MS/LUA
Interpreting RJE diagnostic data
Learning about the RJE Configuration Utility window
Learning about the RJE Diagnostics window
Overview BARR/RJE
Overview SNA connectivity for NJE
Select Connection dialog box
Using the NJE Console
Using the RJE Diagnostics utility
File and record formats
Sending JCL files with an embedded command
Special formats
Using BARR/TRAN
Sending JCL files with an embedded command
Using BARR/TRAN
Common questions: Using BARR/RJE
Device Control tab
Using the Add Sort Criteria Wizard
BARR$SN1 job
BARR$SN2 job
Common questions for BARR/NJE
Learning about JCL (SYSIN) jobs
Data set header POWER section
Remote definition
Adding files to the spool
Advanced Node Settings dialog box
Advanced Printer Options dialog box
BARR information fields
Barr Retain information fields
Channel Input Port dialog box
Common questions for Print Utility
Common questions for SPOOL
Common questions for TCP/IP
Common questions for the Configuration Utility
Common questions: Using RJE
Communication link parameters
Compressing data
Configure Multiple Start Times dialog box
Configuring RJE optional settings
Customizing the retain view
Customizing the spool view
Data set header general section
Data set header output processing section
Device Control tab
Device Properties dialog box
Enabling the 'Print directly to the printer' setting
File and record formats
File Format tab File Port
File Options tab
Format tab
Forms tab
Import Override Table Files dialog box
Information on document status
JES2 commands for RJE
Job header security section
Learning about JCL (SYSIN) jobs
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the Spool Window
Learning about the Viewer window
Logmode table entry
Managing spool documents
Managing spool printers
Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
Overview NJE
Overview Operator Console
Overview RJE
Overview TCP/IP
Overview TRANSFORM
Printer Groups tab
Product features
RJE concepts
Rule Actions dialog box
Sending JCL files with an embedded command
Splitting jobs
Spool and Retain tab
Spool Printers tab
Supported RFC1179 features
System requirements
Tips for routing spool documents
Troubleshooting NJE
Troubleshooting printers
Troubleshooting SPOOL
Troubleshooting using RJE
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Using the Help
Using the RJE Console
Using the Viewer
Welcome
Working with inline Xerox resources
Working with overlays
Working with override tables
Working with printer groups
Working with retained documents
Working with spool printers
Working with the INI file
Xerox file formats
Rule Actions dialog box
Working with override tables
Working with printer groups
Rule Actions dialog box
Working with override tables
Rule Actions dialog box
Welcome
Working with override tables
Working with printer groups
Communication link parameters
RJE concepts
Troubleshooting NJE
Communication link parameters
RJE concepts
Troubleshooting NJE
File Properties dialog box
Modules
Overview LP command line
Overview TCP/IP
Working with TCP/IP sockets
File Properties dialog box
Overview BARR/PRINT TCP/IP
Overview LP command line
Working with TCP/IP sockets
Configuring the NJE auto-start feature (optional)
Configuring the NJE auto-start feature using NetView (optional)
Data set header general section
Data set header output processing section
Device Control tab
Downloading host resources using NJE
Job header accounting section
Learning about JCL (SYSIN) jobs
Overview BARR/NJE
RJE concepts
RJE Description tab
Troubleshooting BARR/NJE
Troubleshooting: Receiving jobs from the host
Using BARR/TRAN
Version and trademark
Device Control tab
Learning about JCL (SYSIN) jobs
Overview NJE
RJE concepts
RJE Description tab
Troubleshooting NJE
Troubleshooting receiving RJE jobs from the host
Communication link parameters
Configuring BARR/NJE for BARR SNA
Configuring JES2 for RJE
Device Control tab
Forms command strings
Forms tab
JES2 commands for RJE
NJE Configuration dialog box
Operator commands for RJE
RJE concepts
Using BARR/TRAN
Forms command strings
Operator commands for RJE
Configuring JES3 for RJE
JES3 commands for RJE
Operator commands for RJE
BARR$SN1 job
SNA Configuration dialog box
JES2 commands for NJE
JES2 commands for RJE