Common questions: Using BARR/RJE
Device Properties dialog box
Options tab
Troubleshooting: Receiving jobs from the host
Device Control tab
JES2 commands for RJE
Common questions: Using BARR/RJE
Troubleshooting: Receiving jobs from the host
Common questions: Using BARR/RJE
Troubleshooting: Receiving jobs from the host
Sending JCL files with an embedded command
Using BARR/TRAN
Accounting tab
Adding files to the spool
Advanced tab LPR port
Automatic Spooling tab
Available user rights
Commands tab
Common questions for BARR/PRINT to EPS
Common questions for Make FCB
Common questions for NJE
Common questions for Operator Console
Common questions for Print Utility
Common questions for printers
Common questions for Retain Window
Common questions for RJE
Common questions for Services
Common questions for SPOOL
Common questions for Spool Window
Common questions for TCP/IP
Common questions for Technical Support
Common questions for the Configuration Utility
Common questions for TRANSFORMS
Common questions: Configuring RJE
Common questions: Managing connections
Common questions: Using RJE
Communication Link tab
Communications Profile tab
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring POWER for RJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Connection Control tab
Content tab
Data set header general section
Device Control tab
Display Properties tab
File Format tab File Port
File Format tab IP Port
File Options tab
Format tab
Forms tab
Getting help
HPR/IP Connection Configuration dialog box
Identifying Barr components
IP Configuration tab
Job tab
Learning about the HTML help window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the Spool Window
Lines-per-form and lines-per-inch settings
Link tab HPR/IP
Logmode table entry
LPD tab
Managing document rights
Managing services
Manual Spooling tab
Modifying a printer's device driver settings
Modifying a printer's port settings
Notes tab
Options tab
Override Table tab
Overview Configuration Utility
Overview NJE
Overview RJE
Overview Technical Support
Page Layout tab
Passing data to the printer without conversion
Preferences tab
Printer Groups tab
Printer Properties dialog box
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Remote definition
Resource Folders tab
RJE Description tab
Routing tab
Routing to another BHCS
Searching the Help
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending jobs to the host
Socket tab
Spool and Retain tab
Spool Printers tab
Trace tab HPR/IP
Troubleshooting NJE
Troubleshooting printers
Troubleshooting RJE connections
Troubleshooting SPOOL
Troubleshooting TCP/IP
Using an override table to auto-assign header fields
Using the Data Conversion Utility
Using the Help
Working with overlays
Working with override tables
Working with page layouts
Working with printer groups
Working with retained documents
Working with the accounting system
Writing to a TCP/IP socket
Writing to disk
Accounting tab
Advanced Printer Options dialog box
Available user rights
Choosing files to include in the diagnostics
Choosing ports and device drivers
Choosing the correct account type
Commands tab
Common questions for SPOOL
Common questions for TCP/IP
Common questions for the Configuration Utility
Common questions: Using RJE
Communication link parameters
Communications Profile tab
Compressing data
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring NJE for BARR SNA
Configuring POWER for RJE
Configuring the NJE auto-start feature (optional)
Configuring the NJE auto-start feature using NetView (optional)
Configuring VTAM for NJE
Data set header 3800 section
Data set header internal custom section
Data set header POWER section
Device Control tab
File and record formats
File Options tab
Getting help
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Interpreting Barr Messages
Interpreting RJE diagnostic data
Job header general section
Learning about JCL (SYSIN) jobs
Learning about the Backup Configuration Utility window
Learning about the HTML help window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Lines-per-form and lines-per-inch settings
Logmode table entry
LPD header fields
Managing document rights
Managing spool documents
Manually configuring readers
Options dialog box Operator Console
Output statements
Override Table tab
Overview Backup Configuration Utility
Overview NJE
Overview Technical Support
Parsing a long header field into separate fields
Printer Properties dialog box
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Remote definition
Resource Folders tab
RJE Description tab
Routing tab
Routing to another BHCS
Rules Editor dialog box
Searching the Help
Sending jobs to the host
Splitting jobs
Spool file processing
Supported RFC1179 features
Troubleshooting NJE
Troubleshooting receiving RJE jobs from the host
Troubleshooting RJE Communication scope characters
Troubleshooting using RJE
Using an override table to auto-assign header fields
Using BARR/TRAN
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the FCB utility
Using the Help
Using the Viewer
Working with NJE routing tables
Working with overlays
Working with override tables
Working with RJE connections
Working with the accounting system
Working with the INI file
Writing to a TCP/IP socket
Writing to disk
Xerox file formats
Data set header 3800 section
Data set header general section
Data set header RSCS section
File and record formats
Job header general section
Working with overlays
Data set header 3800 section
Data set header general section
Data set header RSCS section
Job header general section
Advanced Printer Options dialog box
Available user rights
Common questions for SPOOL
Common questions for Spool Window
Common questions for TCP/IP
Common questions for the Configuration Utility
Configure Multiple Start Times dialog box
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Connecting to the host
Connection Control tab
Data set header general section
Enabling and disabling the retain feature
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Job header general section
Learning about JCL (SYSIN) jobs
Learning about the RJE Configuration Utility window
Learning about the User Rights window
Managing document rights
Manual Spooling tab
Overlay Options dialog box
Override Table tab
Overview Configuration Utility
Overview NJE
Overview Retain Window
Overview Technical Support
Parsing a long header field into separate fields
POWER commands for NJE
POWER commands for RJE
Printer Groups tab
Resource Folders tab
Rules Editor dialog box
Sending files (JCL SYSIN) to the NJE host
Spool and Retain tab
Spool Printers tab
Troubleshooting Configuration Utility
Troubleshooting SPOOL
Troubleshooting Spool Window
Troubleshooting using RJE
Using an override table to auto-assign header fields
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Using the RJE Console
Using the User Rights Configuration utility
Working with NJE routing tables
Working with override tables
Working with RJE connections
Working with spool printers
Common questions for BARR/PRINT TCP/IP
Common questions for the Configuration Utility
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Managing services
Opening and closing the BARR/NJE utility
Opening and closing the BARR/RJE utility
Opening and closing the Configuration Utility
Opening and closing the Make Banner utility
Opening and closing the Make FCB utility
Removing the Barr software
Troubleshooting BARR/SPOOL
Troubleshooting: Managing connections
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Sending JCL files with an embedded command
Using BARR/TRAN
Format tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Troubleshooting using RJE
Using BARR/TRAN
Sending JCL files with an embedded command
Using BARR/TRAN
Sending JCL files with an embedded command
Using BARR/TRAN
Using the Data Conversion Utility
Advanced tab LPR port
Available user rights
Capturing a TCP/IP socket trace
Capturing an LPD trace
Chain Selection dialog box
Choosing files to include in the diagnostics
Choosing ports and device drivers
Common questions for BARR/PRINT TCP/IP
Common questions for printers
Common questions for TRANSFORMS
Communication link parameters
Communication Link tab
Compressing data
Configuring TCP/IP and VTAM for HPR/IP
Configuring the spool to print to a Xerox printer
Configuring VTAM for NJE
Data set header internal custom section
Encrypting data
Format tab
Getting started with BARR/TRANSFORM (ADEPT Suite)
Getting started with TCP/IP sockets
Headers From Data Configuration dialog box
Link tab HPR/IP
Locating diagnostic files
LPD tab
Managing spool printers
Manually sending the diagnostic file
Modules
Opening and closing the TCP/IP Configuration utility
Options dialog box Operator Console
Options tab
Overview BARR/NJE
Overview BARR/PRINT TCP/IP
Overview BARR/PRINT to EPS
Overview BARR/RJE
Overview BHCS
Overview LPR
Overview printers
Overview services
Overview SNA connectivity for NJE
Overview Technical Support
Port Properties dialog box
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Product features
RJE concepts
Routing to another BHCS
Select Code Pages dialog box
Socket tab
Special formats
Spool file processing
Tell me about printers
Troubleshooting BARR/PRINT TCP/IP
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting Spool Window
Troubleshooting: Using BARR/RJE
Using the LPR command line approach
Welcome
Working with LPD print queues
Working with overlays
Working with spool printers
Working with TCP/IP sockets
Writing to a TCP/IP socket
Overview printers
Tell me about printers
Advanced tab LPR port
Getting started with BARR/TRANSFORM (ADEPT Suite)
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Tell me about printers
Working with spool printers
Common questions for BARR/PRINT TCP/IP
Modules
Overview BARR/PRINT TCP/IP
Overview services
Working with TCP/IP sockets
Options dialog box Operator Console
Overview services
Available user rights
Capturing a TCP/IP socket trace
Capturing an LPD trace
Common questions for printers
Common questions for TCP/IP
Compressing data
Encrypting data
Locating diagnostic files
LPD tab
Opening and closing the TCP/IP Configuration utility
Options dialog box Operator Console
Routing to another BHCS
Socket tab
Spool file processing
Working with LPD print queues
Working with TCP/IP sockets
Choosing ports and device drivers
LPD tab
Options dialog box Operator Console
Spool file processing
Capturing a TCP/IP socket trace
Choosing files to include in the diagnostics
Choosing ports and device drivers
Common questions for BARR/PRINT TCP/IP
Getting started with TCP/IP sockets
Locating diagnostic files
Options dialog box Operator Console
Options tab
Overview TCP/IP
Socket tab
Troubleshooting Print Utility
Working with overlays
Working with TCP/IP sockets
Writing to a TCP/IP socket
Capturing a TCP/IP socket trace
Locating diagnostic files
Common questions for TCP/IP
Configuring TCP/IP and VTAM for HPR/IP
Format tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Using BARR/TRAN
Sending JCL files with an embedded command
Using BARR/TRAN
Common questions for BARR/PRINT to EPS
Common questions for Services
Common questions for TCP/IP
Common questions for Technical Support
Common questions for the Configuration Utility
Contacting Barr Systems
Device Properties dialog box
Format tab
Getting help
Learning about the Diagnostics Utility window
Learning about the Spool Window
Locating diagnostic files
Manually sending the diagnostic file
Options dialog box Operator Console
Overview Technical Support
Sending files (JCL SYSIN) to the RJE host
Troubleshooting NJE
Troubleshooting Operator Console
Troubleshooting Print Utility
Troubleshooting SPOOL
Troubleshooting using RJE
Using the Data Conversion Utility
Using the Operator Console to gather diagnostics
Working with RJE connections
Common questions for Services
Common questions for TCP/IP
Common questions for Technical Support
Common questions for the Configuration Utility
Contacting Barr Systems
Device Properties dialog box
Format tab
Getting help
Identifying Barr components
Learning about the Diagnostics Utility window
Locating diagnostic files
Manually sending the diagnostic file
Overview Technical Support
Searching the Help
Sending files (JCL SYSIN) to the RJE host
Troubleshooting NJE
Troubleshooting Print Utility
Troubleshooting SPOOL
Troubleshooting Technical Support
Troubleshooting using RJE
Using the Data Conversion Utility
Using the Help
Using the Operator Console to gather diagnostics
Contacting Barr Systems
Getting help
Options dialog box Operator Console
Using the Operator Console to gather diagnostics
Working with BARR/RJE connections
Overview BARR/RJE
RJE concepts
Learning about the Retain Window
Learning about the Spool Window
Managing spool documents
Working with retained documents
Data set header security section
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Job header security section
Logmode table entry
POWER commands for NJE
POWER commands for RJE
Remote definition
RJE concepts
Data set header security section
Job header security section
File and record formats
Format tab
JES2 commands for RJE
JES3 commands for RJE
Output statements
Remote definition
Sending JCL files with an embedded command
Special formats
Troubleshooting NJE
Using BARR/TRAN
Advanced tab LPR port
Common questions for BARR/PRINT to EPS
Common questions for Print Utility
Common questions for SPOOL
Communication Link tab
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring JES2 for NJE
Configuring JES3 for NJE
Configuring NJE for BARR SNA
Configuring POWER for NJE
File and record formats
Getting help
Getting started with SPOOL
Information on document status
Interpreting Barr Messages
Learning about the RJE Console window
Learning about the Spool Window
Learning about the Viewer window
Manually configuring readers
Overview Retain Window
Overview Technical Support
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Routing to another BHCS
Rule Conditions dialog box
Rules Editor dialog box
Sending jobs to the host
Troubleshooting BARR/NJE
Troubleshooting TCP/IP
Troubleshooting: Using BARR/RJE
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Viewer
Working with override tables
Working with the INI file
Information on document status
Learning about the Spool Window
Learning about the Viewer window
Printing to a TCP/IP printer
Printing to a Windows printer
Sending jobs to the host
Using the Viewer
Using LPR switches
Using the LPR command line approach
Using the LPRM command line approach
Content tab
File Properties dialog box
Supported RFC1179 features
Adding files to the spool
Advanced Printer Options dialog box
Assigning document attribute values
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Channel Input Port dialog box
Commands tab
Common questions for BARR/PRINT to EPS
Common questions for NJE
Common questions for printers
Common questions for TCP/IP
Common questions for TRANSFORMS
Common questions: Using RJE
Communication link parameters
Compressing data
Configuring NJE for BARR SNA
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Content tab
Custom Filter dialog box
Data set header internal custom section
Data set header output processing section
Device Properties dialog box
Display Properties tab
Downloading host resources using NJE
File and record formats
File Options tab
File Properties dialog box
Format Columns dialog box
Format tab
Getting help
Getting started with BARR/TOOLS
Getting started with SPOOL
Information on document status
Interpreting RJE diagnostic data
Job tab
Learning about JCL (SYSIN) jobs
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the Viewer window
Link tab HPR/IP
Locating diagnostic files
Logmode table entry
Managing spool documents
Modules
Notes tab
Opening and closing the Viewer utility
Overlay Options dialog box
Overview Technical Support
Overview TRANSFORM
Overview Viewer
Page Layout tab
Product features
Remote definition
RJE Description tab
Rule Conditions dialog box
Searching the Help
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Special formats
Splitting jobs
Spool and Retain tab
Spool file processing
Supported RFC1179 features
Troubleshooting Configuration Utility
Troubleshooting NJE
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting using RJE
Troubleshooting Viewer
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using LPR switches
Using the Data Conversion Utility
Using the Help
Using the Make Banner utility
Using the NJE Console
Using the Operator Console
Using the PRT utility
Using the RJE Console
Using the Viewer
Working with banners
Working with notes
Working with overlays
Working with override tables
Working with page layouts
Working with retained documents
Working with the INI file
Xerox file formats
Learning about the Retain Window
Learning about the Spool Window
Learning about the Make Banner window
Using the Make Banner utility
Learning about the Make Banner window
Using the Make Banner utility
Managing spool documents
Troubleshooting NJE
Using the Operator Console
Using the RJE Console
Working with retained documents
Overview Viewer
Using the Viewer
Format tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Using BARR/TRAN
Sending JCL files with an embedded command
Using BARR/TRAN
Learning about the Make Banner window
Learning about the NJE Console window
Information on document status
Information on printer status
Learning about the Retain Window
Learning about the Spool Window
File and record formats
Parsing a long header field into separate fields
Learning about the Make Banner window
Learning about the NJE Console window
Information on document status
Learning about the Spool Window
Adding files to the spool
Advanced Printer Options dialog box
Assigning document attribute values
Automatic Spooling tab
Available user rights
Banner Options dialog box
BARR information fields
Barr Retain information fields
Chain Selection dialog box
Choosing the correct account type
Commands tab
Common questions for BARR/PRINT to EPS
Common questions for Make FCB
Common questions for NJE
Common questions for Operator Console
Common questions for Print Utility
Common questions for printers
Common questions for Retain Window
Common questions for Services
Common questions for SPOOL
Common questions for Spool Window
Common questions for TCP/IP
Common questions for Technical Support
Common questions for the Configuration Utility
Common questions for TRANSFORMS
Common questions: Configuring RJE
Common questions: Managing connections
Common questions: Using RJE
Communication link parameters
Communication Link tab
Configure Multiple Start Times dialog box
Configuring JES2 for NJE
Configuring NJE for BARR SNA
Configuring POWER for NJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring TCP/IP and VTAM for HPR/IP
Configuring VTAM for NJE
Connection Control tab
Contacting Barr Systems
Content tab
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Data set header LPD/user custom section
Data set header POWER section
Data set header RCCS section
Data set header security section
Device Control tab
Device Properties dialog box
File and record formats
File Format tab File Port
File Format tab IP Port
File Options tab
File Properties dialog box
Format tab
Forms command strings
Forms tab
Getting help
Getting started using a Barr SNA connection
Getting started using an SNA connection
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Getting started with Make Banner
Getting started with NJE
Getting started with RJE
Getting started with SPOOL
HPR/IP Connection Configuration dialog box
Interpreting RJE diagnostic data
JES2 commands for NJE
JES2 commands for RJE
Job header general section
Job header JES2 section
Job header POWER section
Job header security section
Job tab
Job trailer accounting section
Learning about JCL (SYSIN) jobs
Learning about the Backup Configuration Utility window
Learning about the Operator Console window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the User Rights window
Lines-per-form and lines-per-inch settings
Managing document rights
Managing spool documents
Managing spool printers
Manually configuring readers
Manually sending the diagnostic file
Modifying the default spool folders
Modules
Opening and closing the Viewer utility
Operator and Advanced rights
Operator commands for NJE
Operator commands for RJE
Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
Options tab
Output statements
Overlay Options dialog box
Overview LPR
Overview NJE
Overview Operator Console
Overview Retain Window
Overview RJE
Overview services
Overview Spool Window
Overview Technical Support
Overview User Rights Configuration utility
Port Properties dialog box
Printer Properties dialog box
Redirecting print files (SYSOUT) to the host
Remote definition
Removing the Barr software
Resource Folders tab
RJE concepts
Select Connection dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Sending jobs to the host
Spool and Retain tab
Spool file processing
Spooling Properties dialog box
Supported RFC1179 features
Tips for routing spool documents
Transform Configuration dialog box
Troubleshooting Configuration Utility
Troubleshooting NJE
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting SPOOL
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Using the Help
Using the Operator Console
Using the PRT utility
Using the RJE Console
Using the RJE Diagnostics utility
Using the User Rights Configuration utility
What's new in this release
Working with banners
Working with LPD print queues
Working with overlays
Working with override tables
Working with printer initialization files
Working with retained documents
Working with RJE connections
Working with spool printers
Working with TCP/IP sockets
Working with the accounting system
Working with the INI file
Xerox file formats
Communication link parameters
Communication Link tab
Remote definition
Communication link parameters
Communication Link tab
Remote definition
BARR information fields
Barr Retain information fields
Common questions for Spool Window
Data set header 3800 section
File and record formats
Merge Override Table Files dialog box
Parsing a long header field into separate fields
Splitting jobs
Using BARR/TRAN
Working with override tables
Managing services
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Troubleshooting NJE
Troubleshooting printers
Compressing data
Configuring NJE for BARR SNA
Configuring RJE optional settings
Data set header internal custom section
Data set header LPD/user custom section
Encrypting data
Forms tab
JES2 commands for NJE
JES2 commands for RJE
Job tab
Learning about the Make Banner window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
LPD tab
POWER commands for RJE
Routing to another BHCS
Special formats
Supported RFC1179 features
Troubleshooting NJE
Using BARR job for the NJE auto-start configuration
Working with LPD print queues
Capturing a TCP/IP socket trace
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Capturing an LPD trace
Customizing the retain view
Customizing the spool view
Interpreting Barr Messages
Learning about the Retain Window
Learning about the Spool Window
Locating diagnostic files
Managing spool documents
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Troubleshooting NJE
Using BARR/TRAN
Using the Operator Console
Working with retained documents
Adding files to the spool
Advanced Node Settings dialog box
Advanced Printer Options dialog box
Advanced tab LPR port
Automatic Spooling tab
Banner Options dialog box
Commands tab
Common questions for Print Utility
Common questions for TCP/IP
Common questions: Using RJE
Configure Multiple Start Times dialog box
Configuring RJE optional settings
Connecting to the host
Connection Control tab
Customizing the retain view
Customizing the spool view
Data set header internal custom section
Device Control tab
Device Properties dialog box
Display Properties tab
Enabling the 'Print directly to the printer' setting
File Format tab File Port
File Format tab IP Port
File Options tab
Format Columns dialog box
Format tab
Headers From Data Configuration dialog box
Import Override Table Files dialog box
Installing the software
JES2 commands for RJE
Job tab
Learning about the Backup Configuration Utility window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the Viewer window
Managing spool documents
Managing spool printers
Manually configuring readers
Opening and closing the RJE utilities
Options tab
Overlay Options dialog box
Overview SNA connectivity for NJE
Passing data to the printer without conversion
Printer Properties dialog box
Remote definition
Retain Start/End Date & Time dialog box
RJE Description tab
Rule Actions dialog box
Rules Editor dialog box
Searching the Help
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
SNA Configuration dialog box
Splitting jobs
Spool and Retain tab
Spool Printers tab
Spooling Properties dialog box
Trace tab HPR/IP
Troubleshooting NJE
Troubleshooting printers
Troubleshooting using RJE
Using the Add Sort Criteria Wizard
Using the NJE Console
Working with printer initialization files
Working with retained documents
Working with spool printers
Writing to a TCP/IP socket
Common questions: Using RJE
Connection Control tab
Banner Options dialog box
Overlay Options dialog box
Common questions for printers
Learning about the Operator Console window
Getting started with BARR/TRANSFORM (ADEPT Suite)
Modules
Overview BARR/TRANSFORM
Overview product
Transform Configuration dialog box
Automatic Spooling tab
BARR information fields
Barr Retain information fields
BARR$SN1 job
Choosing the correct account type
Commands tab
Common questions for Make FCB
Common questions for NJE
Common questions for Print Utility
Common questions for SPOOL
Common questions for Spool Window
Common questions for TCP/IP
Common questions for the Configuration Utility
Common questions: Managing connections
Common questions: Using RJE
Communication link parameters
Communication Link tab
Compressing data
Configure Multiple Start Times dialog box
Configuring NJE for BARR SNA
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring TCP/IP and VTAM for HPR/IP
Connection Control tab
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Data set header output processing section
Data set header POWER section
Device Control tab
Device Properties dialog box
Downloading host resources using NJE
Enabling and disabling the retain feature
File Options tab
Forms tab
Getting help
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Information on document status
Job header general section
Job header JES2 section
Job trailer general section
Learning about JCL (SYSIN) jobs
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Managing services
Managing spool documents
Manual Spooling tab
Manually configuring readers
Modifying a printer's device driver settings
Modifying a printer's port settings
Opening and closing the Spool Window utility
Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
Override Table tab
Overview Make FCB
Overview Operator Console
Overview Retain Window
Overview Technical Support
Page Layout tab
Preferences tab
Print Preview toolbar
Printing to a TCP/IP printer
Remote definition
Resource Folders tab
Retain Start/End Date & Time dialog box
RJE Description tab
Rules Editor dialog box
Schedule Print Date and Time dialog box
Splitting jobs
Spool and Retain tab
Spool Printers tab
Supported RFC1179 features
Troubleshooting Configuration Utility
Troubleshooting NJE
Troubleshooting printers
Troubleshooting Retain Window
Troubleshooting RJE connections
Troubleshooting Services
Troubleshooting SPOOL
Troubleshooting Spool Window
Troubleshooting using RJE
Using BARR/TRAN
Using the RJE Console
Using the RJE Diagnostics utility
Working with Print Utility control files
Working with retained documents
Working with spool printers
Working with the accounting system
Working with the INI file
Configure Multiple Start Times dialog box
Retain Start/End Date & Time dialog box
Schedule Print Date and Time dialog box
Format tab
Sending JCL files with an embedded command
Common questions for the Configuration Utility
File and record formats
Overlay Options dialog box
Splitting jobs
Troubleshooting printers
Working with overlays
Troubleshooting printers
Using the Data Conversion Utility
Device Properties dialog box
File Options tab
Learning about JCL (SYSIN) jobs
Options tab
Spool file processing
Troubleshooting using RJE
Using the Data Conversion Utility
Interpreting RJE diagnostic data
Overview BARR/RJE
Common questions for Make FCB
Learning about the HTML help window
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the Viewer window
Managing spool documents
Managing spool printers
Opening and closing the Retain Window
Opening and closing the Viewer utility
Overview Spool Window
Print Preview toolbar
Using the FCB utility
Using the Help
Using the Operator Console
Using the User Rights Configuration utility
Using the Viewer
Working with retained documents
Common questions for Make FCB
Using the FCB utility
Managing spool printers
Working with retained documents
Learning about the Spool Window
Overview services
Assigned user rights
Available user rights
Capturing a TCP/IP socket trace
Capturing an LPD trace
Common questions for BARR/TOOLS and BARR/TRANSFORMS
Communication Link tab
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Encrypting data
Getting started with BARR/SPOOL
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Identifying Barr components
Installing the software
Learning about the Backup Configuration Utility window
Learning about the Retain Window
Learning about the Spool Window
Locating diagnostic files
LPD tab
Managing spool documents
Mount Forms dialog box
Opening and closing the BARR/NJE utility
Opening and closing the BARR/PRINT TCP/IP Configuration utility
Opening and closing the BARR/RJE utility
Opening and closing the Configuration Utility
Opening and closing the Diagnostics Utility
Opening and closing the Make Banner utility
Opening and closing the Make FCB utility
Opening and closing the Operator Console utility
Opening and closing the Print Utility
Options dialog box Operator Console
Overview services
Overview TOOLS
Socket tab
Troubleshooting SPOOL
Troubleshooting Viewer
Using the Backup Configuration Utility
Using the Operator Console
Using the Operator Console to gather diagnostics
Using the RJE Console
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Mount Forms dialog box
Options dialog box Operator Console
Adding files to the spool
Choosing files to include in the diagnostics
Common questions for Operator Console
Common questions for Print Utility
Common questions for printers
Common questions for Services
Common questions for TCP/IP
Common questions for the Configuration Utility
Common questions: Configuring RJE
Common questions: Using RJE
Communicating with the NJE host
Communicating with the RJE host
Communication link parameters
Communication Link tab
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring NJE for BARR SNA
Configuring POWER for RJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring the host for Barr SNA or SNA
Configuring the NJE auto-start feature (optional)
Configuring VTAM for RJE
Connecting to the host
Contacting Barr Systems
Customizing the retain view
Customizing the spool view
Device Control tab
Device Properties dialog box
File Format tab File Port
File Format tab IP Port
File Options tab
Format tab
Forms tab
Getting help
Getting started with Make Banner
Getting started with NJE
Getting started with printers
Getting started with SPOOL
Interpreting Barr Messages
Interpreting RJE diagnostic data
JES2 commands for RJE
Learning about JCL (SYSIN) jobs
Learning about the HTML help window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the User Rights window
Logmode table entry
LPD tab
Managing document rights
Managing spool documents
Managing spool printers
Modifying the default spool folders
Operator and Advanced rights
Operator commands for NJE
Operator commands for RJE
Options tab
Overview Configuration Utility
Overview LPR
Overview Technical Support
Passing data to the printer without conversion
Printing to a Windows printer
Receiving RJE jobs from the host
Removing the Barr software
Resource Folders tab
RJE concepts
Searching the Help
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Spool file processing
Spool Printers tab
Spooling Properties dialog box
Transform Configuration dialog box
Troubleshooting BARR/PRINT to EPS
Troubleshooting Configuration Utility
Troubleshooting Configuring RJE
Troubleshooting Make FCB
Troubleshooting NJE
Troubleshooting NJE Console
Troubleshooting Operator Console
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting Retain Window
Troubleshooting RJE
Troubleshooting RJE Communication scope characters
Troubleshooting RJE connections
Troubleshooting Services
Troubleshooting SPOOL
Troubleshooting Spool Window
Troubleshooting TCP/IP
Troubleshooting Technical Support
Troubleshooting using RJE
Troubleshooting Viewer
Using BARR/TRAN
Using the Backup Configuration Utility
Using the FCB utility
Using the Help
Using the NJE Console
Using the Operator Console to gather diagnostics
Using the RJE Console
Using the RJE Diagnostics utility
What's new in this release
Working with LPD print queues
Working with NJE connections
Working with override tables
Working with spool printers
Xerox file formats
Searching the Help
Using the Help
Common questions: Configuring RJE
Communication link parameters
Configuring VTAM for NJE
Data set header general section
Data set header internal custom section
File and record formats
HPR/IP Connection Configuration dialog box
Interpreting RJE diagnostic data
Job trailer general section
Learning about the Diagnostics Utility window
Learning about the Spool Window
Overview Technical Support
RJE Description tab
Splitting jobs
Supported RFC1179 features
Using BARR/TRAN
Using the RJE Console
BARR$SN1 job
BARR$SN2 job
Sending JCL files with an embedded command
Using BARR/TRAN
Configuring JES2 for NJE
Troubleshooting RJE connections
Capturing a TCP/IP socket trace
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Capturing an LPD trace
Capturing diagnostics
Channel Input Port dialog box
Choosing files to include in the diagnostics
Common questions for Operator Console
Common questions for printers
Common questions: Configuring RJE
Learning about the Diagnostics Utility window
Learning about the Operator Console window
Learning about the RJE Diagnostics window
Locating diagnostic files
LPD tab
Manually sending the diagnostic file
Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
Options dialog box Operator Console
Overview Diagnostics Utility
Overview Operator Console
Socket tab
Trace tab HPR/IP
Troubleshooting BARR/NJE
Troubleshooting Operator Console
Troubleshooting using RJE
Troubleshooting: Receiving jobs from the host
Using the NJE Console
Using the Operator Console
Using the Operator Console to gather diagnostics
Using the RJE Diagnostics utility
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Locating diagnostic files
Locating diagnostic files
Trace tab HPR/IP
Banner Options dialog box
Common questions for Spool Window
Common questions for TCP/IP
Device Properties dialog box
Insert Field dialog box
JES2 commands for RJE
JES3 commands for RJE
Job trailer general section
Learning about the Backup Configuration Utility window
Overlay Options dialog box
Overview Header fields
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Resource Folders tab
Routing to another BHCS
Spool file processing
Troubleshooting using RJE
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Viewer
Working with banners
Working with spool printers
File and record formats
Troubleshooting using RJE
Data set header general section
Device Control tab
Overview Technical Support
Common questions: Using BARR/RJE
Remote definition
RJE Description tab
Troubleshooting: Using BARR/RJE
Common questions for TRANSFORMS
Data set header internal custom section
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Learning about the Spool Window
Options dialog box Operator Console
Overview TRANSFORM
Transform Configuration dialog box
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Transform Configuration dialog box
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Working with the INI file
Common questions: Using RJE
Data set header 3800 section
Data set header internal custom section
File and record formats
Format tab
Job header general section
Remote definition
Select Code Pages dialog box
Troubleshooting using RJE
Using the Data Conversion Utility
Working with overlays
Common questions for printers
Common questions: Using RJE
Communication link parameters
Communication Link tab
Compressing data
Configuring VTAM for NJE
Data set header 3800 section
Data set header RSCS section
Device Properties dialog box
File and record formats
Job header general section
Job tab
Job trailer general section
Learning about the RJE Diagnostics window
Logmode table entry
Overview NJE
Overview RJE
Overview TCP/IP
POWER commands for NJE
POWER commands for RJE
Printing to a Xerox printer
Product features
RJE concepts
Troubleshooting NJE
Troubleshooting using RJE
Using BARR/TRAN
Writing to a TCP/IP socket
Advanced tab LPR port
Capturing diagnostics
Choosing files to include in the diagnostics
Job header general section
Learning about the Diagnostics Utility window
Locating diagnostic files
Overview BARR/RJE
Overview Diagnostics Utility
Using BARR job for the NJE auto-start configuration
Capturing diagnostics
Choosing files to include in the diagnostics
Learning about the Diagnostics Utility window
Locating diagnostic files
Overview Diagnostics Utility
Using BARR job for the NJE auto-start configuration
Device Properties dialog box
Special formats
Data set header 3800 section
Data set header internal custom section
LPD header fields
Data set header internal custom section
LPD header fields
Data set header internal custom section
LPD header fields
Managing spool documents
Using the Add Sort Criteria Wizard
Working with retained documents
Common questions for BARR/PRINT TCP/IP
Content tab
File Properties dialog box
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Supported RFC1179 features
Using LPR switches
Content tab
Supported RFC1179 features
Common questions for Operator Console
Getting help
Troubleshooting Configuring RJE
Troubleshooting SPOOL
Troubleshooting Configuration Utility
Troubleshooting Viewer
Assigning document attribute values
Common questions for BARR/NJE
Common questions for BARR/PRINT to EPS
Data set header general section
Data set header internal custom section
Device Properties dialog box
File and record formats
Getting started with SPOOL
Learning about the Make Banner window
Learning about the Viewer window
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Trace tab HPR/IP
Troubleshooting NJE
Troubleshooting Print Utility
Troubleshooting Spool Window
Troubleshooting using RJE
Using BARR/TRAN
Using the Data Conversion Utility
Using the Viewer
Data set header general section
Job header general section
Using BARR job for the NJE auto-start configuration
Configuring VTAM for NJE
Interpreting RJE diagnostic data
Logmode table entry
RJE Description tab
Sending JCL files with an embedded command
Using BARR/TRAN
Getting started with BARR/TRANSFORM (ADEPT Suite)
Transform Configuration dialog box
Adding files to the spool
Advanced Printer Options dialog box
Automatic Spooling tab
Barr SNA Configuration dialog box
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Capturing diagnostics
Chain Selection dialog box
Choosing the correct account type
Commands tab
Common questions for Make FCB
Common questions for NJE
Common questions for Print Utility
Common questions for printers
Common questions for Services
Common questions for SPOOL
Common questions for TCP/IP
Common questions for the Configuration Utility
Common questions for TRANSFORMS
Common questions: Managing connections
Common questions: Using RJE
Communication link parameters
Communication Link tab
Compressing data
Configure Multiple Start Times dialog box
Configuring BARR/NJE for BARR SNA
Configuring JES2 for NJE
Configuring POWER for RJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring TCP/IP and VTAM for HPR/IP
Configuring VTAM for NJE
Connection Configuration dialog box
Content tab
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Data set header LPD/user custom section
Data set header output processing section
Data set header POWER section
Data set header RCCS section
Data set header RSCS section
Data set header security section
Device Properties dialog box
Downloading host resources using NJE
Encrypting data
File and record formats
File Format tab File Port
File Format tab IP Port
File Properties dialog box
Format Columns dialog box
Format tab
Forms tab
Getting started using a Barr SNA connection
Getting started using an SNA connection
Getting started with BARR/RJE
Getting started with NJE
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Information on document status
Interpreting Barr Messages
Interpreting RJE diagnostic data
JES2 commands for NJE
JES2 commands for RJE
Job header accounting section
Job header general section
Job header JES2 section
Job header POWER section
Job header schedule section
Job header security section
Job trailer accounting section
Job trailer general section
Learning about JCL (SYSIN) jobs
Learning about the Make FCB window
Learning about the RJE Configuration Utility window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Lines-per-form and lines-per-inch settings
Locating diagnostic files
LPD tab
Managing document rights
Managing services
Managing spool documents
Managing spool printers
Manual Spooling tab
Manually configuring readers
NJE Configuration dialog box
Notes tab
Options dialog box Operator Console
Options tab
Output statements
Overlay Options dialog box
Overview BARR/NJE
Overview BHCS
Overview Header fields
Overview Operator Console
Overview Retain Window
Overview SNA connectivity for NJE
Overview Spool Window
Overview TCP/IP
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Receiving RJE jobs from the host
Remote definition
RJE concepts
RJE Description tab
Routing to another BARR/SPOOL
Rule Actions dialog box
Rule Conditions dialog box
Searching the Help
Select Connection dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Sending jobs to the host
SNA Configuration dialog box
Socket tab
Special formats
Spool file processing
Supported RFC1179 features
Tips for routing spool documents
Transform Configuration dialog box
Troubleshooting Configuration Utility
Troubleshooting Configuring RJE
Troubleshooting NJE
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting RJE connections
Troubleshooting SPOOL
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the FCB utility
Using the Help
Using the Make Banner utility
Using the NJE Console
Using the PRT utility
Using the RJE Console
Using the Viewer
Working with LPD print queues
Working with NJE connections
Working with NJE routing tables
Working with overlays
Working with override tables
Working with page layouts
Working with Print Utility control files
Working with retained documents
Working with RJE connections
Working with TCP/IP sockets
Working with the INI file
Xerox file formats
Configuring BARR/NJE for BARR SNA
SNA Configuration dialog box
Manually configuring readers
Printing to a TCP/IP printer
Getting started with BARR/RJE
Overview BARR/NJE
Locating diagnostic files
Manually configuring readers
Getting started using a Barr SNA connection
Getting started using an SNA connection
Common questions for BARR/PRINT TCP/IP
Common questions for the Configuration Utility
Troubleshooting BARR/SPOOL