<<

C-Class
C-Plot CIF file
C – RCCS
C DATA
C dev
C J545
   JES2 commands for NJE
   JES2 commands for RJE
C Jnnnn
   JES2 commands for NJE
   JES2 commands for RJE
C jobname,jobid
C PR1
C RD1
C WC
C_037.NLS
C_IBM 6262
C”
C0
   Interpreting RJE diagnostic data
   Logmode table entry
C1
C2
C3
C4 27
C4 D6 D5 C5
C8 C9 5A
CALL
   Configuring TCP/IP and VTAM for HPR/IP
   JES3 commands for RJE
Calling
   Common questions: Using BARR/RJE
   Overview BARR/RJE
   RJE concepts
   RJE Description tab
   Using BARR/TRAN
   Using the PRT utility
    BARR/TRAN
       Common questions: Using BARR/RJE
       Using BARR/TRAN
    initiate
    logmode
    logon
    PRT
    RJE
CalTech Intermediate Form
   Content tab
   File Properties dialog box
   Supported RFC1179 features
can;t
Cancel
   Advanced Printer Options dialog box
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Learning about the NJE Console window
   Locating diagnostic files
   Managing spool documents
   Managing spool printers
   Manually configuring readers
   Mount Forms dialog box
   Opening and closing the BARR/NJE utility
   Opening and closing the BARR/PRINT TCP/IP Configuration utility
   Opening and closing the BARR/RJE utility
   Opening and closing the Configuration Utility
   Opening and closing the Print Utility
   POWER commands for NJE
   Troubleshooting NJE
   Troubleshooting printers
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Make Banner utility
   Using the RJE Console
   Using the User Rights Configuration utility
   Using the Viewer
   Working with BARR/RJE connections
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with retained documents
   Working with spool printers
    No
       Using the User Rights Configuration utility
       Working with override tables
       Working with page layouts
       Working with printer groups
       Working with RJE connections
    Special
Cancel – Ends
CAP
   Learning about the Make Banner window
   Learning about the NJE Console window
Captures Xerox
Capturing
   Capturing a TCP/IP socket trace
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Capturing an LPD trace
   Locating diagnostic files
    HPR/IP
       Capturing an HPR/IP trace for NJE
       Capturing an HPR/IP trace for RJE
       Locating diagnostic files
    HPR/IP trace
       Capturing an HPR/IP trace for NJE
       Capturing an HPR/IP trace for RJE
    LPD
    LPD trace
    TCP/IP socket trace
Capturing diagnostics
CARD DECK IN FILE-80 FORMAT
CARDS WERE READ
Carriage
   Common questions for NJE
   Common questions for TCP/IP
   Common questions: Using RJE
   Configuring RJE optional settings
   Content tab
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header POWER section
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Properties dialog box
   Format tab
   Forms tab
   Headers From Data Configuration dialog box
   JES2 commands for RJE
   Job header general section
   Output statements
   Remote definition
   RJE concepts
   RJE Description tab
   Sending JCL files with an embedded command
   Special formats
   Spool file processing
   Supported RFC1179 features
   Troubleshooting Print Utility
   Troubleshooting TCP/IP
   Using BARR/TRAN
   Using LPR switches
   Using the Data Conversion Utility
   Using the PRT utility
   Working with LPD print queues
   Working with overlays
    specify
       File Format tab File Port
       File Format tab IP Port
Carriage Control
   Common questions for NJE
   Common questions for TCP/IP
   Common questions: Using BARR/RJE
   Configuring RJE optional settings
   Content tab
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header POWER section
   Device Control tab
   Device Properties dialog box
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Properties dialog box
   Format tab
   Forms tab
   Headers From Data Configuration dialog box
   JES2 commands for RJE
   Job header general section
   Output statements
   Remote definition
   RJE concepts
   RJE Description tab
   Special formats
   Spool file processing
   Supported RFC1179 features
   Troubleshooting Print Utility
   Troubleshooting TCP/IP
   Using BARR/TRAN
   Using LPR switches
   Using the Data Conversion Utility
   Using the PRT utility
   Working with LPD print queues
   Working with overlays
Carriage control during transmission
Carriage Return
   Common questions for NJE
   Data set header internal custom section
   File Format tab File Port
   File Format tab IP Port
   Format tab
   Sending JCL files with an embedded command
   Special formats
   Using BARR/TRAN
Case
   Advanced Printer Options dialog box
   Assigning document attribute values
   Common questions for BARR/PRINT to EPS
   Common questions for Print Utility
   Configuring RJE optional settings
   Data set header 3800 section
   Data set header general section
   Getting help
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Job header general section
   Job trailer general section
   Learning about JCL (SYSIN) jobs
   Output statements
   Overview Technical Support
   Printer Properties dialog box
   Rule Actions dialog box
   Spool Printers tab
   Tips for routing spool documents
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using the Data Conversion Utility
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the PRT utility
   Using the Viewer
   Working with overlays
   Working with page layouts
Case Manager
   Getting help
   Overview Technical Support
Case tracking
CAT CCWs
CATALOGED PROCEDURE FOR BARRTRAN
    INSTALL
CATALOGED PROCEDURE TO
    AUTHORIZED TO ADD
CATLG
Cause Briefly
Causes
   Channel Input Port dialog box
   Common questions for Print Utility
   Common questions for printers
   Common questions for TCP/IP
   Common questions: Configuring RJE
   Common questions: Using RJE
   Customizing the spool view
   Data set header general section
   Data set header LPD/user custom section
   File and record formats
   File Options tab
   Forms tab
   Interpreting Barr Messages
   JES2 commands for RJE
   Job header general section
   Job tab
   Learning about the RJE Configuration Utility window
   Learning about the RJE Diagnostics window
   Logmode table entry
   Managing spool printers
   Options dialog box Operator Console
   Overview RJE
   Overview Technical Support
   Preferences tab
   Remote definition
   Rule Actions dialog box
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Tips for routing spool documents
   Troubleshooting BARR/PRINT to EPS
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting Make FCB
   Troubleshooting NJE
   Troubleshooting NJE Console
   Troubleshooting Operator Console
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting Retain Window
   Troubleshooting RJE Communication scope characters
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the NJE Console
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Console
   Using the RJE Diagnostics utility
   Working with retained documents
   Working with the accounting system
    Barr
    NJE Console
CC
   Data set header general section
   Data set header internal custom section
   Using the Data Conversion Utility
    get
CC 133
CC 81
CCTEST
   Common questions: Using RJE
   Troubleshooting: Receiving jobs from the host
CCTEST JOB
CCTL
   Data set header general section
   Remote definition
CCWs
   Data set header 3800 section
   Data set header general section
    representing
CD-ROM
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
    Navigate
       Getting started with BARR/TOOLS
       Getting started with BARR/TRANSFORM (ADEPT Suite)
CDP
CfA”
Cfg
   Spool Printers tab
   Working with BARR/RJE connections
   Working with spool printers
Chain Selection dialog box
Change
   Adding files to the spool
   Advanced Printer Options dialog box
   Assigning document attribute values
   Available user rights
   BARR information fields
   Barr Retain information fields
   BARR$SN1 job
   BARR$SN2 job
   Choosing the correct account type
   Commands tab
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for Services
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Communication link parameters
   Communication Link tab
   Compressing data
   Configure Multiple Start Times dialog box
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring VTAM for NJE
   Connecting to the host
   Connection Configuration dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Data set header security section
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Enabling and disabling the retain feature
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   Enhanced channel skip processing
   File and record formats
   File Options tab
   File Properties dialog box
   Forms tab
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Information on document status
   Installing the software
   JES2 commands for RJE
   JES3 commands for RJE
   Job header accounting section
   Job header general section
   Job header security section
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Logmode table entry
   LPD header fields
   LPD tab
   Managing document rights
   Managing services
   Managing spool documents
   Managing spool printers
   Manual Spooling tab
   Manually configuring readers
   Modifying a printer's port settings
   Modifying the default spool folders
   Mount Forms dialog box
   NJE Configuration dialog box
   Opening and closing the NJE utilities
   Opening and closing the Print Utility
   Opening and closing the Retain Window
   Opening and closing the RJE utilities
   Opening and closing the Spool Window utility
   Opening and closing the TCP/IP Configuration utility
   Options dialog box Operator Console
   Options tab
   Overlay Options dialog box
   Override Table tab
   Overview BARR/PRINT to EPS
   Overview BHCS
   Overview Configuration Utility
   Overview Header fields
   Overview Retain Window
   Overview services
   Overview SPOOL
   Overview Spool Window
   Overview Technical Support
   Port Properties dialog box
   POWER commands for NJE
   POWER commands for RJE
   Printer Groups tab
   Printer Properties dialog box
   Printing to a Xerox printer
   Receiving RJE jobs from the host
   Redirecting print files (SYSOUT) to the host
   Remote definition
   Resource Folders tab
   RJE concepts
   RJE Description tab
   Routing tab
   Routing to another BHCS
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Socket tab
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Tell me about printers
   Troubleshooting BARR/NJE
   Troubleshooting BARR/SPOOL
   Troubleshooting Configuration Utility
   Troubleshooting Make FCB
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting Services
   Troubleshooting Spool Window
   Troubleshooting Viewer
   Troubleshooting: Using BARR/RJE
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Help
   Using the Make Banner utility
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Console
   Using the User Rights Configuration utility
   Using the Viewer
   What's new in this release
   Working with NJE profiles
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with printer initialization files
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with the accounting system
   Working with the INI file
    ADEPT INI
    AUTH
    Barr
    BARR SpoolCore
    dfB
    Disabled
       Common questions for Spool Window
       Learning about the Spool Window
    Disconnected
    document’s
    Down
    Draining
       Common questions for printers
       Common questions for Spool Window
       Learning about the Spool Window
    FCB
       Learning about the Make FCB window
       Using the FCB utility
    FCB’s
       Learning about the Make FCB window
       Using the FCB utility
    file’s
    GENERIC_ID
    Hold
    Hold Reprint
    job’s
    PARM
    PARMLIB
    Printable lines/page
       Common questions for Make FCB
       Using the FCB utility
    printer’s
    PRWIDTH
    Ready Reprint
    Spool
    Spool Window
    Stop
       LPD tab
       Socket tab
    Test Page
    WS
Change 'xxxx.LINKLIB
   BARR$SN1 job
   BARR$SN2 job
Change "TPADD
Change "xxxx.APPCTP
change depending
    Use FCBLOAD
Changed during
Changes depending
   Communication Link tab
   Configuring RJE optional settings
    link
Channel
   Available user rights
   Channel Input Port dialog box
   Common questions for Make FCB
   Common questions: Using BARR/RJE
   Data set header 3800 section
   Data set header internal custom section
   Device Control tab
   Downloading host resources using NJE
   Enhanced channel skip processing
   File and record formats
   Forms tab
   JES2 commands for RJE
   Learning about the Make FCB window
   Learning about the Spool Window
   Lines-per-form and lines-per-inch settings
   Managing spool documents
   Options dialog box Operator Console
   Overview BARR/NJE
   Overview BARR/RJE
   Overview BHCS
   Overview Make FCB
   Overview services
   Overview TCP/IP
   Product features
   Remote definition
   Special formats
   Troubleshooting printers
   Troubleshooting Viewer
   Using the Data Conversion Utility
   Using the FCB utility
   Working with overlays
   Working with spool printers
    Pad Zero Length Skip
    Skip
       Common questions: Using BARR/RJE
       Data set header internal custom section
       Device Control tab
       Enhanced channel skip processing
       File and record formats
       JES2 commands for RJE
       Special formats
       Troubleshooting printers
       Troubleshooting Viewer
       Using the Data Conversion Utility
    Therefore, Skip
channel-attached 3174
Channel 10
    Skip
Channel 11
    Skip
Channel 12
   Common questions: Using BARR/RJE
   Enhanced channel skip processing
    Skip
       Common questions: Using BARR/RJE
       Enhanced channel skip processing
Channel Command Word
Channel Input Port
   Available user rights
   Channel Input Port dialog box
   Learning about the Spool Window
   Options dialog box Operator Console
Channel Input Port dialog box
Channel Stop
   Common questions for Make FCB
   Device Control tab
   Downloading host resources using NJE
   Forms tab
   Learning about the Make FCB window
   Overview Make FCB
   Using the FCB utility
Channel Stop heading
   Learning about the Make FCB window
   Using the FCB utility
CHAR
Character-by-character
Character-coded
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Logmode table entry
   RJE Description tab
Character-coded logon
Character Coded
   Communication link parameters
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   RJE Description tab
Character Coded logon
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
Character string
Characteristics
   Job header general section
   Learning about JCL (SYSIN) jobs
   LPD header fields
   Overview Header fields
   Overview services
   POWER commands for NJE
   POWER commands for RJE
   Using BARR/TRAN
    defines
Characters
   Advanced Printer Options dialog box
   BARR$SN1 job
   Commands tab
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for SPOOL
   Common questions for the Configuration Utility
   Common questions: Configuring BARR/RJE
   Common questions: Using RJE
   Communication link parameters
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Connection Control tab
   Content tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Data set header POWER section
   Data set header RSCS section
   Data set header security section
   Device Control tab
   Device Properties dialog box
   Encrypting data
   Enhanced channel skip processing
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   File Properties dialog box
   Format tab
   Forms command strings
   Headers From Data Configuration dialog box
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for RJE
   Job header general section
   Job header JES2 section
   Job header POWER section
   Job header security section
   Job tab
   Job trailer general section
   Learning about JCL (SYSIN) jobs
   Learning about the Backup Configuration Utility window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Link tab HPR/IP
   LPD header fields
   Options tab
   Output statements
   Overview BARR/PRINT to EPS
   Overview Header fields
   Page Layout tab
   Parsing a long header field into separate fields
   Remote definition
   RJE concepts
   RJE Description tab
   Rule Conditions dialog box
   Searching the Help
   Select Code Pages dialog box
   Sending JCL files with an embedded command
   Special formats
   Spool file processing
   Supported RFC1179 features
   Tips for routing spool documents
   Troubleshooting Print Utility
   Troubleshooting RJE Communication scope characters
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Using BARR/TRAN
   Using LPR switches
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Help
   Using the Make Banner utility
   Using the PRT utility
   Using the RJE Console
   Using the Viewer
   Working with override tables
   Working with page layouts
   Working with RJE connections
   Working with the INI file
   Xerox file formats
Characters appearing
CHARS
   Data set header 3800 section
   Data set header internal custom section
   LPD header fields
CHARS JCL
   Data set header internal custom section
   LPD header fields
    Corresponds
       Data set header internal custom section
       LPD header fields
CHARSET
CHECK
    name
Check JES
Check subfolders
   Common questions for Print Utility
   Spooling Properties dialog box
Check XPAF
Checks
   Adding files to the spool
   Advanced Printer Options dialog box
   Automatic Spooling tab
   Banner Options dialog box
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Common questions for BARR/PRINT to EPS
   Common questions for NJE
   Common questions for Print Utility
   Common questions for SPOOL
   Common questions for TRANSFORMS
   Common questions: Using RJE
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Connecting to the host
   Connection Control tab
   Data set header general section
   Data set header internal custom section
   Device Properties dialog box
   Enabling and disabling the retain feature
   Getting help
   Installing the software
   Interpreting RJE diagnostic data
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Job header general section
   Learning about JCL (SYSIN) jobs
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Locating diagnostic files
   Logmode table entry
   Managing spool documents
   Managing spool printers
   Manually configuring readers
   Manually sending the diagnostic file
   Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
   Options dialog box Operator Console
   Overlay Options dialog box
   Overview Retain Window
   Overview RJE
   Overview services
   Overview Technical Support
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Redirecting print files (SYSOUT) to the host
   Routing to another BHCS
   Searching the Help
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Set Destination Node dialog box
   Spool and Retain tab
   Spool file processing
   Spooling Properties dialog box
   Trace tab HPR/IP
   Troubleshooting BARR/NJE
   Troubleshooting Configuring RJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE Communication scope characters
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting SPOOL
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using the Add Sort Criteria Wizard
   Using the NJE Console
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Console
   Using the Viewer
   Working with banners
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with spool printers
   Working with the accounting system
   Writing to a TCP/IP socket
   Writing to disk
    APF
    Forms
    New Documents
       Learning about the Spool Window
       Managing spool documents
    NJE Configuration
    Priority
CHECKS JOB
CHECKS.DAT
CHECKS.JCL
CHEK
CHKS
Choose
   Adding files to the spool
   Advanced Printer Options dialog box
   Choosing files to include in the diagnostics
   Choosing ports and device drivers
   Choosing the correct account type
   Common questions for NJE
   Common questions for SPOOL
   Common questions for the Configuration Utility
   Compressing data
   Configuring BARR/RJE optional settings
   Configuring JES2 for NJE
   Configuring POWER for NJE
   Connection Control tab
   Customizing the retain view
   Customizing the spool view
   Data set header LPD/user custom section
   Device Control tab
   Device Properties dialog box
   Enabling and disabling the retain feature
   Encrypting data
   File Options tab
   Format Columns dialog box
   Format tab
   Forms tab
   Installing the software
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the Viewer window
   Locating diagnostic files
   Managing document rights
   Managing spool documents
   Managing spool printers
   Manual Spooling tab
   Opening and closing the Retain Window
   Opening and closing the Spool Window utility
   Options tab
   Overview Print Utility
   Overview Retain Window
   Overview Spool Window
   Overview Viewer
   Page Layout tab
   Passing data to the printer without conversion
   Printer Properties dialog box
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Remote definition
   Resource Folders tab
   Retain Start/End Date & Time dialog box
   Routing to another BHCS
   Rule Actions dialog box
   Schedule Print Date and Time dialog box
   Select Header Fields dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Sending jobs to the host
   Set Destination Node dialog box
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Troubleshooting NJE
   Troubleshooting printers
   Using an override table to auto-assign header fields
   Using the Add Sort Criteria Wizard
   Using the FCB utility
   Using the Help
   Using the Make Banner utility
   Using the RJE Console
   Using the User Rights Configuration utility
   Working with banners
   Working with NJE profiles
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with RJE connections
   Working with spool printers
   Writing to disk
    ASCII
       Sending files (JCL SYSIN) to the NJE host
       Sending files (JCL SYSIN) to the RJE host
    Barr
    BARR/NJE
    Communications Suite
    Enable
    Field
    Header Field
       Managing document rights
       Working with override tables
    Italic
    Mount
    Route
       Rule Actions dialog box
       Working with override tables
    Save As
       Learning about the NJE Console window
       Learning about the Operator Console window
    Save Settings As
    Select Existing
    SYSOUT
Choose Abort
Choose Ascending
Choose Files dialog
   Adding files to the spool
   Manual Spooling tab
    Displays
Choose Ignore
Choose No
Choose OK
Choose Retry
Choose Route
CI600
CIF
   Content tab
   File Properties dialog box
   Supported RFC1179 features
CIF file
CJ,P038,FC
CKPTLINE
   Configuring JES2 for RJE
   Remote definition
   RJE Description tab
   Troubleshooting: Using BARR/RJE
CKPTPAGE
   Common questions for BARR/PRINT TCP/IP
   Remote definition
   Troubleshooting: Receiving jobs from the host
   Troubleshooting: Using BARR/RJE
Class
   Available user rights
   BARR$SN1 job
   Common questions for BARR/PRINT TCP/IP
   Common questions for BARR/SPOOL
   Common questions for Print Utility
   Common questions: Configuring RJE
   Common questions: Using BARR/RJE
   Configuring BARR/RJE optional settings
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header RSCS section
   Data set header security section
   Device Properties dialog box
   Forms tab
   Getting started with BARR/SPOOL
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for RJE
   Job header general section
   Job header security section
   Job tab
   Job trailer general section
   Learning about JCL (SYSIN) jobs
   Learning about the Retain Window
   LPD header fields
   Managing document rights
   Managing spool documents
   Options tab
   Output statements
   Overview BARR/NJE
   POWER commands for NJE
   POWER commands for RJE
   Receiving RJE jobs from the host
   Remote definition
   Supported RFC1179 features
   Tips for routing spool documents
   Troubleshooting BARR/PRINT TCP/IP
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting using RJE
   Troubleshooting: Receiving jobs from the host
   Using BARR job for the NJE auto-start configuration
   Using LPR switches
   Using the Add Sort Criteria Wizard
   Using the PRT utility
   Working with retained documents
    Banner Page
    edit
    filter
       Customizing the retain view
       Customizing the spool view
    QUEUE
    Service
    Set
Class corresponds
    LPR
CLASS SELECTION
CLASSADD CLASSNAME
Clean
   Installing the software
   Removing the Barr software
Clean - Removes
Clean option
   Installing the software
   Removing the Barr software
Clear – Removes
    subfolder
Clear Clears
Clear Conditions button
Clear Custom View
   Customizing the retain view
   Customizing the spool view
   Learning about the Retain Window
   Learning about the Spool Window
Clear Custom View button
   Customizing the retain view
   Customizing the spool view
   Learning about the Retain Window
   Learning about the Spool Window
Clear Default Connection
   Connecting to the host
   Learning about the RJE Console window
Clear Host Nodes
Clear Reprint Range
   Learning about the Spool Window
   Learning about the Viewer window
   Using the Viewer
Clear Settings
   Customizing the retain view
   Customizing the spool view
   Learning about the Retain Window
   Learning about the Spool Window
Clear To Send
Clear Trace
   Learning about the RJE Diagnostics window
   Using the NJE Console
   Using the RJE Diagnostics utility
Clear Trace toolbar button
   Using the NJE Console
   Using the RJE Diagnostics utility
Clears
   Advanced Printer Options dialog box
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Common questions for NJE
   Common questions for printers
   Communications Profile tab
   Connecting to the host
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   File Options tab
   Information on printer status
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Locating diagnostic files
   Managing spool documents
   Notes tab
   Overview services
   Routing tab
   Rule Conditions dialog box
   Searching the Help
   Set Destination Node dialog box
   Trace tab HPR/IP
   Troubleshooting BARR/NJE
   Troubleshooting printers
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting: Using BARR/RJE
   Using the NJE Console
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Diagnostics utility
   Using the Viewer
   Working with banners
   Working with NJE routing tables
   Working with notes
   Working with printer groups
   Working with printer initialization files
   Working with spool printers
    Create
    Enabled
    If FCB
    Log spooler
    Print
    Send
    Special
    Trace
       Capturing an HPR/IP trace for NJE
       Capturing an HPR/IP trace for RJE
       Locating diagnostic files
    Use
       Set Destination Node dialog box
       Using the NJE Console
    Windows spooler
Click Advanced
Click Select Chain
Clicking
   Adding files to the spool
   Available user rights
   Common questions for BARR/PRINT TCP/IP
   Communication link parameters
   Communication Link tab
   Configure Multiple Start Times dialog box
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Configuring the spool to print to a Xerox printer
   Device Properties dialog box
   Disk Settings dialog box
   Getting help
   Getting started with LPD
   HPR/IP Connection Configuration dialog box
   Import Override Table Files dialog box
   Insert Field dialog box
   Learning about the Make Banner window
   Learning about the Make FCB window
   Link tab HPR/IP
   Logmode table entry
   LPD tab
   Managing spool documents
   Managing spool printers
   Merge Override Table Files dialog box
   Notes tab
   Overview Technical Support
   Printer Properties dialog box
   Remote definition
   RJE Description tab
   Select Header Fields dialog box
   Set Destination Node dialog box
   Spooling Properties dialog box
   Troubleshooting BARR/SPOOL
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using the Data Conversion Utility
   Using the Help
   Using the Make Banner utility
   Using the Viewer
   Working with LPD print queues
   Working with notes
   Working with override tables
   Working with retained documents
    Add
       Printer Properties dialog box
       Spooling Properties dialog box
    Configure
       Configure Multiple Start Times dialog box
       Device Properties dialog box
       HPR/IP Connection Configuration dialog box
    Dest
    Disk Settings
    documents
       Managing spool documents
       Working with retained documents
    Favorites
    Help button
       Getting help
       Overview Technical Support
    Import
    Insert Field
       Insert Field dialog box
       Learning about the Make Banner window
       Using the Make Banner utility
    Logmode Table Entry
    Merge
    Modify
       Link tab HPR/IP
       Spooling Properties dialog box
    More
    Move Up
    Notes
       Available user rights
       Notes tab
       Working with notes
    OK
       Getting started with LPD
       LPD tab
       Working with LPD print queues
    Pause
    Physical Unit
    Print
       Communication link parameters
       Communication Link tab
       Remote definition
       RJE Description tab
    Remote Definition
       Configuring JES2 for RJE
       Configuring JES3 for RJE
       Configuring POWER for RJE
       Remote definition
    Rename
       Common questions for BARR/PRINT TCP/IP
       Configuring the spool to print to a Xerox printer
    Reprint Bottom button
    Reprint Top button
    Restore Defaults
    Retry button
    rows
       Managing spool documents
       Managing spool printers
    Save As
    Select Fields
    Set Destination
    Yes
Clipboard
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the RJE Console window
   Learning about the Viewer window
   Overview Viewer
   RJE Description tab
   Using the Help
   Using the Viewer
    viewing
Clist
    refers
CLOS
Close
   Advanced tab LPR port
   Capturing a TCP/IP socket trace
   Capturing an LPD trace
   Common questions for Services
   Common questions for SPOOL
   Common questions: Configuring BARR/RJE
   Common questions: Managing connections
   Compressing data
   Configuring BARR/NJE for BARR SNA
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Connecting to the host
   Customizing the retain view
   Customizing the spool view
   Downloading host resources using NJE
   Encrypting data
   File and record formats
   File Options tab
   Getting started with LPD
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Locating diagnostic files
   LPD tab
   Managing services
   Managing spool documents
   Managing spool printers
   Modifying a printer's port settings
   Mount Forms dialog box
   Opening and closing the BARR/NJE utility
   Opening and closing the BARR/PRINT TCP/IP Configuration utility
   Opening and closing the BARR/RJE utility
   Opening and closing the Configuration Utility
   Opening and closing the Diagnostics Utility
   Opening and closing the Make Banner utility
   Opening and closing the Make FCB utility
   Opening and closing the Operator Console utility
   Opening and closing the Print Utility
   Opening and closing the Retain Window
   Opening and closing the Spool Window utility
   Opening and closing the Viewer utility
   Options dialog box Operator Console
   Overview BHCS
   Overview services
   Print Preview toolbar
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BARR/SPOOL
   Searching the Help
   Sending jobs to the host
   Socket tab
   Supported RFC1179 features
   Troubleshooting SPOOL
   Troubleshooting: Managing connections
   Using BARR job for the NJE auto-start configuration
   Using the Help
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Console
   Using the User Rights Configuration utility
   Using the Viewer
   Working with LPD print queues
   Working with override tables
   Working with RJE connections
   Working with spool printers
   Working with the accounting system
   Writing to a TCP/IP socket
   Writing to disk
    BARR/PRINT TCP/IP Configuration
       Capturing a TCP/IP socket trace
       Capturing an LPD trace
       Locating diagnostic files
       LPD tab
       Socket tab
    Configuration Utility
       Compressing data
       Printing to a TCP/IP print queue
       Printing to a Windows printer
       Printing to a Xerox printer
       Routing to another BARR/SPOOL
       Sending jobs to the host
       Writing to a TCP/IP socket
       Writing to disk
    Printer Ports dialog
    resource.job file
    RJE Configuration Utility
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
       Configuring BARR/RJE for MS/LUA
    RJE Console
    RJE Console window
    Select Header Fields dialog
    Select Resource dialog
    utility
       Opening and closing the BARR/NJE utility
       Opening and closing the BARR/PRINT TCP/IP Configuration utility
       Opening and closing the BARR/RJE utility
       Opening and closing the Configuration Utility
       Opening and closing the Diagnostics Utility
       Opening and closing the Make Banner utility
       Opening and closing the Make FCB utility
       Opening and closing the Operator Console utility
       Opening and closing the Print Utility
       Opening and closing the Retain Window
       Opening and closing the Spool Window utility
       Opening and closing the Viewer utility
    Viewer
       Managing spool documents
       Using the Viewer
Close Closes
   Learning about the Operator Console window
   Printing to a Windows printer
Close button
   Modifying a printer's port settings
   Opening and closing the BARR/NJE utility
   Opening and closing the BARR/PRINT TCP/IP Configuration utility
   Opening and closing the BARR/RJE utility
   Opening and closing the Configuration Utility
   Opening and closing the Diagnostics Utility
   Opening and closing the Make Banner utility
   Opening and closing the Make FCB utility
   Opening and closing the Operator Console utility
   Opening and closing the Print Utility
   Opening and closing the Retain Window
   Opening and closing the Spool Window utility
   Opening and closing the Viewer utility
   Using the Help
    window
Cluster Controller
   Overview SNA connectivity for NJE
   Troubleshooting RJE Communication scope characters
CLY
CMD
CME
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
CMPCT
CMS
   Data set header general section
   Job header general section
    originating
CMS SENDFILE
CNM01 ISTPUS NB6ET004 WKCPU
CNM01 OPER1 08/13/02 14
CNMCLST
Code
   Advanced Printer Options dialog box
   Common questions for Make FCB
   Common questions for NJE
   Common questions for printers
   Common questions for TCP/IP
   Common questions: Configuring RJE
   Common questions: Using RJE
   Configuring BARR/RJE optional settings
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header RSCS section
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Enhanced channel skip processing
   Forms tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Installing the software
   Interpreting RJE diagnostic data
   JES2 commands for RJE
   Job header general section
   Job header POWER section
   Job trailer accounting section
   Learning about the Backup Configuration Utility window
   Learning about the Make FCB window
   Learning about the Operator Console window
   Learning about the Spool Window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Manually configuring readers
   Options tab
   Output statements
   Overview Backup Configuration Utility
   Overview Make FCB
   Overview Operator Console
   Overview Viewer
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   RJE Description tab
   Routing to another BHCS
   Select Code Pages dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Sending jobs to the host
   Special formats
   Spool and Retain tab
   Supported RFC1179 features
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Viewer
   Version and trademark
   Welcome
   What's new in this release
   Working with LPD print queues
   Working with overlays
   Working with override tables
   Working with spool printers
   Working with TCP/IP sockets
   Writing to a TCP/IP socket
   Writing to disk
    select
Code Page Editor
   Common questions: Using BARR/RJE
   Device Properties dialog box
   Learning about the Backup Configuration Utility window
   Welcome
   What's new in this release
    use
       Common questions: Using BARR/RJE
       Device Properties dialog box
Code Pages
   Advanced Printer Options dialog box
   Common questions for NJE
   Common questions: Using RJE
   Configuring RJE optional settings
   Device Properties dialog box
   Learning about the Backup Configuration Utility window
   Learning about the Viewer window
   Manually configuring readers
   Options tab
   Output statements
   Overview Viewer
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BARR/SPOOL
   Select Code Pages dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Troubleshooting Print Utility
   Using the Data Conversion Utility
   Using the Viewer
   Welcome
   What's new in this release
   Working with LPD print queues
   Working with spool printers
   Working with TCP/IP sockets
   Writing to a TCP/IP socket
   Writing to disk
Code Pages button
CodePage2CodePageDCO
CodePage2UnicodeDCO
Coding
    DSN
Col
Collate
   Managing spool documents
   Managing spool printers
   Working with retained documents
Color - Colors
Color coding
Colors
   Display Properties tab
   Interpreting RJE diagnostic data
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Managing spool documents
   Managing spool printers
   Options dialog box Operator Console
   Using the Help
   Using the NJE Console
   Using the RJE Console
   Using the RJE Diagnostics utility
Colors Selects
Colors dialog
   Learning about the RJE Console window
   Using the RJE Console
    Opens
Column
   Advanced Printer Options dialog box
   Available user rights
   BARR information fields
   Barr Retain information fields
   Channel Input Port dialog box
   Common questions for Make FCB
   Common questions for Print Utility
   Common questions for printers
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for TRANSFORMS
   Common questions: Configuring RJE
   Common questions: Using RJE
   Compressing data
   Configuring RJE optional settings
   Configuring the spool to print to a Xerox printer
   Content tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   Data set header LPD/user custom section
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Enabling and disabling the retain feature
   Encrypting data
   File and record formats
   Format Columns dialog box
   Getting started with BARR/PRINT to EPS
   Getting started with Retain Window
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Headers From Data Configuration dialog box
   Information on document status
   Job tab
   Learning about JCL (SYSIN) jobs
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Managing spool documents
   Managing spool printers
   Opening and closing the Viewer utility
   Output statements
   Overview BHCS
   Overview Retain Window
   Overview services
   Overview Spool Window
   Printer Groups tab
   Receiving RJE jobs from the host
   Redirecting print files (SYSOUT) to the host
   Routing tab
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Splitting jobs
   Supported RFC1179 features
   Tips for routing spool documents
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting Spool Window
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using LPR switches
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the FCB utility
   Using the LPQ command line approach
   Using the LPRM command line approach
   Using the Make Banner utility
   Using the RJE Console
   Using the Viewer
   Working with printer groups
   Working with retained documents
   Working with spool printers
    which adds
Column-oriented
Column heading
   Common questions for TCP/IP
   Configuring the spool to print to a Xerox printer
   Customizing the retain view
   Customizing the spool view
   Format Columns dialog box
   Learning about the Make FCB window
   Learning about the Retain Window
   Learning about the Spool Window
   Using the FCB utility
    indicate
       Learning about the Retain Window
       Learning about the Spool Window
Columns Shows
Columns include
COMC
Command
   Advanced Printer Options dialog box
   Available user rights
   BARR$SN1 job
   Commands tab
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for Services
   Common questions for TCP/IP
   Common questions: Configuring RJE
   Common questions: Using BARR/RJE
   Communicating with the NJE host
   Communication Link tab
   Compressing data
   Configuring BARR/RJE optional settings
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Connection Control tab
   Content tab
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header RSCS section
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Enabling and disabling the retain feature
   Encrypting data
   Enhanced channel skip processing
   File and record formats
   File Options tab
   File Properties dialog box
   Format tab
   Forms command strings
   Forms tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Interpreting Barr Messages
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Job header general section
   Job tab
   Learning about JCL (SYSIN) jobs
   Learning about the HTML help window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Logmode table entry
   LPD header fields
   LPD tab
   Managing spool documents
   Managing spool printers
   Mount Forms dialog box
   Operator commands for NJE
   Operator commands for RJE
   Options tab
   Overview BHCS
   Overview LP command line
   Overview LPR
   Overview Make FCB
   Overview NJE
   Overview RJE
   Overview TCP/IP
   Overview TOOLS
   Parsing a long header field into separate fields
   POWER commands for NJE
   POWER commands for RJE
   Remote definition
   RJE concepts
   RJE Description tab
   Routing to another BHCS
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Set Destination Node dialog box
   Special formats
   Spool file processing
   Supported RFC1179 features
   Transform Configuration dialog box
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting TCP/IP
   Troubleshooting: Using BARR/RJE
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Help
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
   Using the NJE Console
   Using the PRT utility
   Using the RJE Console
   Using the User Rights Configuration utility
   Using the Viewer
   Working with inline Xerox resources
   Working with LPD print queues
   Working with overlays
   Working with page layouts
   Working with printer initialization files
   Working with retained documents
   Working with the INI file
   Xerox file formats
    Ignore
    MVS/JES2
       Forms command strings
       Operator commands for RJE
    printer encounters
       Common questions for Make FCB
       Device Control tab
       Downloading host resources using NJE
       Forms tab
       Learning about the Make FCB window
       Overview Make FCB
       Using the FCB utility
    use
Command button
   Commands tab
   Common questions: Using RJE
   Configuring RJE optional settings
   Learning about the RJE Console window
   Troubleshooting using RJE
   Using the RJE Console
Command Data
command IF 52
Command interrupts
    job
Command negates
Command placed
   Sending JCL files with an embedded command
   Troubleshooting Print Utility
Command prompt
   Common questions for Services
   Managing spool documents
   Troubleshooting Configuration Utility
   Using the Backup Configuration Utility
    back
Command stops
   POWER commands for NJE
   POWER commands for RJE
    connection
    running
Command Syntax
   Parsing a long header field into separate fields
   Using the PRT utility
Commands according
Commands exist
    override
Commands referencing
Commands tab
Comments
   Capturing diagnostics
   Learning about JCL (SYSIN) jobs
   Learning about the Diagnostics Utility window
   Locating diagnostic files
   Overview BARR/PRINT TCP/IP
   Overview Diagnostics Utility
   Rules Editor dialog box
   Xerox file formats
    Request
Comments – Documents
    JCL
Comments Enter
Common
   Adding files to the spool
   Commands tab
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Operator Console
   Common questions for Print Utility
   Common questions for printers
   Common questions for Retain Window
   Common questions for RJE
   Common questions for Services
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for Technical Support
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Configuring RJE optional settings
   Configuring VTAM for NJE
   Data set header internal custom section
   Device Properties dialog box
   File Properties dialog box
   Forms command strings
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Logmode table entry
   Options tab
   Overview Print Utility
   Overview Retain Window
   Overview Spool Window
   Overview TOOLS
   Overview Viewer
   Parsing a long header field into separate fields
   RJE concepts
   Searching the Help
   Troubleshooting BARR/PRINT to EPS
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting Make FCB
   Troubleshooting NJE
   Troubleshooting NJE Console
   Troubleshooting Operator Console
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting Retain Window
   Troubleshooting RJE
   Troubleshooting RJE Communication scope characters
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting Technical Support
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR/TRAN
   Using the PRT utility
   Working with overlays
Common Files/Barr/Log
Common JES2
   Commands tab
   Common questions: Using BARR/RJE
Common LU
   Configuring VTAM for NJE
   Interpreting RJE diagnostic data
   Logmode table entry
Common practice
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
Common questions
   Common questions for BARR/NJE
   Common questions for BARR/PRINT to EPS
   Common questions for BARR/RJE
   Common questions for BARR/TOOLS and BARR/TRANSFORMS
   Common questions for Operator Console
   Common questions for Retain Window
   Common questions for Services
   Common questions for Spool Window
   Common questions for Technical Support
   Common questions: Managing connections
   Getting help
   Troubleshooting Spool Window
Common troubleshooting
common uses
   Common questions: Using RJE
   Configuring RJE optional settings
   Device Properties dialog box
   JES2 commands for RJE
COMMTYPE
    setting
Communicate
   Barr SNA Configuration dialog box
   Choosing the correct account type
   Communicating with the NJE host
   Communicating with the RJE host
   Communication Link tab
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring the host for Barr SNA or SNA
   Configuring the NJE auto-start feature (optional)
   Connecting to the host
   Determining the communication paths
   Encrypting data
   Getting started with BARR/RJE
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Logmode table entry
   Manually sending the diagnostic file
   Options dialog box Operator Console
   Overview BARR/NJE
   Overview BHCS
   Overview RJE
   POWER commands for NJE
   POWER commands for RJE
   RJE concepts
   SNA Configuration dialog box
   Troubleshooting NJE
   Using BARR job for the NJE auto-start configuration
   Using the NJE Console
   Working with NJE routing tables
   Working with RJE connections
Communication Link
   Communication link parameters
   Communication Link tab
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring VTAM for RJE
   Connection Control tab
   Getting started with RJE
   Learning about the NJE Console window
   Learning about the RJE Console window
   Overview SNA connectivity for NJE
   Remote definition
   RJE concepts
    break
COMMUNICATION PROTOCOLS
Communication Suite ports
Communications
   Accounting tab
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Assigned user rights
   Barr Retain information fields
   Capturing a TCP/IP socket trace
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Capturing an LPD trace
   Channel Input Port dialog box
   Choosing files to include in the diagnostics
   Choosing ports and device drivers
   Choosing the correct account type
   Common questions for Print Utility
   Common questions for printers
   Common questions for Services
   Common questions for SPOOL
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions: Configuring BARR/RJE
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Configure Multiple Start Times dialog box
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Connection Control tab
   Customizing the spool view
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header POWER section
   Data set header RSCS section
   Determining the communication paths
   Device Properties dialog box
   Downloading host resources using NJE
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   File and record formats
   Format tab
   Getting help
   Getting started using a Barr SNA connection
   Getting started with RJE
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   HPR/IP Connection Configuration dialog box
   Identifying Barr components
   Installing the software
   Interpreting RJE diagnostic data
   Learning about the Diagnostics Utility window
   Learning about the NJE Console window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Lines-per-form and lines-per-inch settings
   Locating diagnostic files
   Logmode table entry
   Managing spool printers
   Manually sending the diagnostic file
   Modules
   Options dialog box Operator Console
   Overview Backup Configuration Utility
   Overview BARR/PRINT to EPS
   Overview BHCS
   Overview Diagnostics Utility
   Overview LPR
   Overview NJE
   Overview Print Utility
   Overview Retain Window
   Overview RJE
   Overview services
   Overview SNA connectivity for NJE
   Overview SPOOL
   Overview Spool Window
   Overview TCP/IP
   Overview TOOLS
   Overview TRANSFORM
   Overview User Rights Configuration utility
   Passing data to the printer without conversion
   POWER commands for NJE
   POWER commands for RJE
   Printer Properties dialog box
   Product features
   Redirecting print files (SYSOUT) to the host
   Remote definition
   Removing the Barr software
   RJE concepts
   RJE Description tab
   Routing tab
   Set Destination Node dialog box
   Spool file processing
   Supported RFC1179 features
   System requirements
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting NJE
   Troubleshooting NJE Console
   Troubleshooting printers
   Troubleshooting RJE Communication scope characters
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting Technical Support
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the Operator Console to gather diagnostics
   Using the RJE Console
   Using the RJE Diagnostics utility
   Using the User Rights Configuration utility
   Version and trademark
   Welcome
   What's new in this release
   Working with LPD print queues
   Working with NJE connections
   Working with NJE routing tables
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Xerox file formats
Communications devices
   Data set header POWER section
   POWER commands for NJE
   POWER commands for RJE
   Redirecting print files (SYSOUT) to the host
   RJE concepts
Communications Profile
   Communications Profile tab
   Troubleshooting NJE
   Using BARR job for the NJE auto-start configuration
   Working with NJE connections
Communications Profile tab
   Communications Profile tab
   Working with NJE connections
Communications Scope
   Common questions: Configuring RJE
   Interpreting RJE diagnostic data
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Overview RJE
   Troubleshooting RJE Communication scope characters
   Using the RJE Console
   Using the RJE Diagnostics utility
Communications Software
Communications Subsystem
Communications Suite
   Accounting tab
   Advanced Printer Options dialog box
   Assigned user rights
   Barr Retain information fields
   Channel Input Port dialog box
   Choosing files to include in the diagnostics
   Choosing ports and device drivers
   Choosing the correct account type
   Common questions for Print Utility
   Common questions for printers
   Common questions for Services
   Common questions for SPOOL
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Customizing the spool view
   Data set header internal custom section
   Device Properties dialog box
   Downloading host resources using NJE
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   File and record formats
   Format tab
   Getting help
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Identifying Barr components
   Installing the software
   Learning about the Diagnostics Utility window
   Learning about the Spool Window
   Manually sending the diagnostic file
   Modules
   Options dialog box Operator Console
   Overview Backup Configuration Utility
   Overview BARR/PRINT to EPS
   Overview BHCS
   Overview Diagnostics Utility
   Overview NJE
   Overview Print Utility
   Overview Retain Window
   Overview RJE
   Overview services
   Overview SPOOL
   Overview Spool Window
   Overview TCP/IP
   Overview TOOLS
   Overview TRANSFORM
   Overview User Rights Configuration utility
   Passing data to the printer without conversion
   Printer Properties dialog box
   Product features
   Removing the Barr software
   System requirements
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting NJE Console
   Troubleshooting printers
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting Technical Support
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the Operator Console to gather diagnostics
   Using the User Rights Configuration utility
   Version and trademark
   Welcome
   What's new in this release
   Working with LPD print queues
   Working with RJE connections
   Working with spool printers
   Working with the accounting system
   Xerox file formats
    another
    choose
    computer
    create
    function
    import
    mainframe
Communications Suite tool
Communications Suite CD
Communications Suite computer
   Accounting tab
   Channel Input Port dialog box
   Encrypting data
   Format tab
   Troubleshooting printers
   Working with the accounting system
Communications Suite computer adding
   Accounting tab
   Working with the accounting system
Communications Suite configuration
Communications Suite Features
Communications Suite gives
Communications Suite implements
Communications Suite input
Communications Suite operators
Communications Suite printer
Communications Suite programs
Communications Suite services
Communications Suite source
Communications Suite spool
Communications Suite uses
Communications Suite version 7.1.34
COMPACT
   Remote definition
   Troubleshooting: Receiving jobs from the host
    specify
COMPACT1,CREATOR
CompatibilityLevel
Completing
   Managing services
   Using BARR job for the NJE auto-start configuration
    User
    VTAM
Composed Page Data Stream
   Data set header POWER section
   File and record formats
COMPRESS
   Configuring JES2 for RJE
   Remote definition
Compress2DecompressDCO
Compressing
    data
Compression Level
   Compressing data
   Data set header internal custom section
    Add
Compression level ranging
CompressionLevel
COMPROT
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Configuring VTAM for NJE
   Interpreting RJE diagnostic data
   Logmode table entry
   RJE Description tab
Computer
   Accounting tab
   Assigned user rights
   Available user rights
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Channel Input Port dialog box
   Choosing ports and device drivers
   Choosing the correct account type
   Commands tab
   Common questions for Services
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Communication link parameters
   Communication Link tab
   Compressing data
   Configure Multiple Start Times dialog box
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring the NJE auto-start feature (optional)
   Connecting to the host
   Connection Control tab
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header security section
   Determining the communication paths
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Encrypting data
   File Options tab
   Format tab
   Forms tab
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with NJE
   Getting started with printers
   Getting started with RJE
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Installing the software
   Interpreting RJE diagnostic data
   IP Configuration tab
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Job header security section
   Job tab
   Learning about JCL (SYSIN) jobs
   Learning about the Backup Configuration Utility window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the User Rights window
   Lines-per-form and lines-per-inch settings
   Logmode table entry
   Managing services
   Managing spool documents
   Manually configuring readers
   Manually sending the diagnostic file
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Operator commands for NJE
   Options dialog box Operator Console
   Options tab
   Output statements
   Overview Backup Configuration Utility
   Overview BHCS
   Overview Diagnostics Utility
   Overview LPR
   Overview NJE
   Overview printers
   Overview RJE
   Overview services
   Overview SNA connectivity for NJE
   Overview TCP/IP
   Overview Technical Support
   Overview User Rights Configuration utility
   Page Layout tab
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Xerox printer
   Remote definition
   Resource Folders tab
   RJE concepts
   RJE Description tab
   Routing tab
   Routing to another BHCS
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Spool and Retain tab
   Spool file processing
   System requirements
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting RJE Communication scope characters
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting SPOOL
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Backup Configuration Utility
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
   Using the NJE Console
   Using the PRT utility
   Using the RJE Diagnostics utility
   Using the User Rights Configuration utility
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with page layouts
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Writing to a TCP/IP socket
   Xerox file formats
    Communications Suite
    which
       JES2 commands for NJE
       JES2 commands for RJE
       JES3 commands for NJE
       JES3 commands for RJE
       Logmode table entry
Computer operating
Computer program
   Data set header LPD/user custom section
   Lines-per-form and lines-per-inch settings
   Spool file processing
    control
       Data set header LPD/user custom section
       Lines-per-form and lines-per-inch settings
Computer’s
   Connection Control tab
   Learning about the RJE Console window
   Spool and Retain tab
   Transform Configuration dialog box
COND
Condition Code
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
Conditions
   Common questions for Operator Console
   Common questions for the Configuration Utility
   Configuring RJE optional settings
   Connection Control tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Import Override Table Files dialog box
   Information on printer status
   Interpreting Barr Messages
   Managing document rights
   Parsing a long header field into separate fields
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Data Conversion Utility
   Version and trademark
   Working with override tables
    Consists
    override uses
Conducts
   Overview Technical Support
   Trace tab HPR/IP
   Using the Operator Console to gather diagnostics
CONFIG
Configuration
   Accounting tab
   Advanced Printer Options dialog box
   Assigned user rights
   Assigning document attribute values
   Available user rights
   Banner Options dialog box
   Barr SNA Configuration dialog box
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Capturing diagnostics
   Channel Input Port dialog box
   Common questions for NJE
   Common questions for printers
   Common questions for Retain Window
   Common questions for SPOOL
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Compressing data
   Configuring JES2 for NJE
   Configuring JES3 for NJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring the host for Barr SNA or SNA
   Configuring VTAM for NJE
   Connecting to the host
   Connection Configuration dialog box
   Content tab
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   Define Page Layout dialog box
   Disk Settings dialog box
   Display Properties tab
   Enabling and disabling the retain feature
   Encrypting data
   Forms tab
   Getting help
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with NJE
   Getting started with Retain Window
   Getting started with RJE
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Headers From Data Configuration dialog box
   HPR/IP Connection Configuration dialog box
   Installing the software
   Interpreting Barr Messages
   Job tab
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Link tab HPR/IP
   Locating diagnostic files
   Managing document rights
   Manually configuring readers
   Merge Override Table Files dialog box
   Modifying the default spool folders
   Modules
   Mount Forms dialog box
   Notes tab
   Opening and closing the Configuration Utility
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Operator and Advanced rights
   Options dialog box Operator Console
   Overlay Options dialog box
   Override Table tab
   Overview Backup Configuration Utility
   Overview Configuration Utility
   Overview Diagnostics Utility
   Overview Make FCB
   Overview NJE
   Overview Retain Window
   Overview RJE
   Overview services
   Overview SNA connectivity for NJE
   Overview Spool Window
   Overview Technical Support
   Overview User Rights Configuration utility
   Page Layout tab
   Passing data to the printer without conversion
   Preferences tab
   Printer Groups tab
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Receiving RJE jobs from the host
   Redirecting print files (SYSOUT) to the host
   Removing the Barr software
   Resource Folders tab
   Retain Start/End Date & Time dialog box
   Routing to another BHCS
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Select Header Fields dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Set Destination Node dialog box
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Trace tab HPR/IP
   Transform Configuration dialog box
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting Make FCB
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting Retain Window
   Troubleshooting RJE Communication scope characters
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the FCB utility
   Using the LPR command line approach
   Using the NJE Console
   Using the RJE Console
   Using the User Rights Configuration utility
   Working with banners
   Working with LPD print queues
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with notes
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with printer initialization files
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with the accounting system
   Writing to a TCP/IP socket
   Writing to disk
    menu bar
    NJE Console menu bar
Configuration Opens
   Learning about the NJE Console window
   Learning about the Spool Window
    NJE Console Configuration
Configuration Utility
   Accounting tab
   Advanced Printer Options dialog box
   Available user rights
   Banner Options dialog box
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Common questions for BARR/PRINT TCP/IP
   Common questions for BARR/SPOOL
   Common questions for printers
   Common questions for Retain Window
   Common questions for the Configuration Utility
   Common questions: Configuring RJE
   Common questions: Managing connections
   Communication link parameters
   Compressing data
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   Define Page Layout dialog box
   Disk Settings dialog box
   Enabling and disabling the retain feature
   Encrypting data
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with BARR/SPOOL
   Getting started with NJE
   Getting started with RJE
   HPR/IP Connection Configuration dialog box
   Import Override Table Files dialog box
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the Spool Window
   Link tab HPR/IP
   Locating diagnostic files
   Managing document rights
   Manually configuring readers
   Merge Override Table Files dialog box
   Modifying the default spool folders
   Mount Forms dialog box
   Notes tab
   Opening and closing the Configuration Utility
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Options dialog box Operator Console
   Overlay Options dialog box
   Override Table tab
   Overview Configuration Utility
   Overview Make FCB
   Overview NJE
   Overview RJE
   Overview User Rights Configuration utility
   Page Layout tab
   Parsing a long header field into separate fields
   Passing data to the printer without conversion
   Printer Groups tab
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Removing the Barr software
   Resource Folders tab
   Retain Start/End Date & Time dialog box
   Routing to another BARR/SPOOL
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Select Header Fields dialog box
   Sending jobs to the host
   Set Destination Node dialog box
   Splitting jobs
   Spool and Retain tab
   Spool Printers tab
   Trace tab HPR/IP
   Troubleshooting BARR/NJE
   Troubleshooting BARR/SPOOL
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting Make FCB
   Troubleshooting printers
   Troubleshooting Retain Window
   Troubleshooting RJE connections
   Troubleshooting Spool Window
   Using an override table to auto-assign header fields
   Using the FCB utility
   Using the NJE Console
   Using the RJE Console
   Using the User Rights Configuration utility
   Working with banners
   Working with BARR/RJE connections
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with notes
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with printer initialization files
   Working with retained documents
   Working with spool printers
   Working with the accounting system
   Writing to a TCP/IP socket
   Writing to disk
    Close
       Compressing data
       Printing to a TCP/IP print queue
       Printing to a Windows printer
       Printing to a Xerox printer
       Routing to another BARR/SPOOL
       Sending jobs to the host
       Writing to a TCP/IP socket
       Writing to disk
    exit
       Manually configuring readers
       Printing to a TCP/IP printer
       Spool and Retain tab
    exiting
    form
    Open
       Manually configuring readers
       Printing to a Windows printer
       Troubleshooting BARR/NJE
       Troubleshooting printers
    opening
    Select
       Working with override tables
       Working with page layouts
    Use
       Common questions for printers
       Getting started with BARR/SPOOL
       Overview Configuration Utility
       Working with printer groups
Configuration Utility’s
   Disk Settings dialog box
   Getting started with Retain Window
   Working with printer initialization files
Configuration Utility�s
Configure
   Accounting tab
   Adding files to the spool
   Advanced Node Settings dialog box
   Advanced Printer Options dialog box
   Assigned user rights
   Available user rights
   Barr SNA Configuration dialog box
   BARR$SN1 job
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Chain Selection dialog box
   Channel Input Port dialog box
   Choosing the correct account type
   Common questions for Make FCB
   Common questions for Print Utility
   Common questions for printers
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using RJE
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Compressing data
   Configure Multiple Start Times dialog box
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring the host for Barr SNA or SNA
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring the spool to print to a Xerox printer
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Connection Configuration dialog box
   Connection Control tab
   Customizing the retain view
   Customizing the spool view
   Determining the communication paths
   Device Control tab
   Device Properties dialog box
   Encrypting data
   File Format tab IP Port
   File Options tab
   File Properties dialog box
   Format tab
   Forms tab
   Getting help
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with BARR/PRINT to EPS
   Getting started with NJE
   Getting started with RJE
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   HPR/IP Connection Configuration dialog box
   IP Configuration tab
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Link tab HPR/IP
   Logmode table entry
   Managing document rights
   Managing services
   Manually configuring readers
   Modifying a printer's device driver settings
   Modifying a printer's port settings
   Modifying the default spool folders
   modules
   NJE Configuration dialog box
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Operator and Advanced rights
   Options dialog box Operator Console
   Options tab
   Overview Configuration Utility
   Overview LPR
   Overview NJE
   Overview Retain Window
   Overview RJE
   Overview services
   Overview SNA connectivity for NJE
   Overview TCP/IP
   Overview Technical Support
   Overview User Rights Configuration utility
   Parsing a long header field into separate fields
   Passing data to the printer without conversion
   Port Properties dialog box
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Receiving RJE jobs from the host
   Redirecting print files (SYSOUT) to the host
   Remote definition
   Resource Folders tab
   Routing to another BHCS
   Select Code Pages dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   SNA Configuration dialog box
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Tips for routing spool documents
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting Make FCB
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using the Data Conversion Utility
   Using the NJE Console
   Using the RJE Console
   Using the User Rights Configuration utility
   Working with LPD print queues
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with overlays
   Working with page layouts
   Working with printer initialization files
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Working with the INI file
   Writing to a TCP/IP socket
   Writing to disk
Configure Assigns
Configure Opens
Configure BARR/NJE
   BARR$SN1 job
   Getting started using an SNA connection
   Working with NJE connections
    SNA
Configure Multiple Start Times dialog box
Configure MVS/JES2
Configure MVS/JES3
Configure Port
   Modifying a printer's port settings
   Troubleshooting printers
Configure TCP/IP
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring VTAM for NJE
   Routing to another BHCS
Configure VPS
Configure VTAM
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring the NJE auto-start feature (optional)
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
Configuring
   Assigned user rights
   Available user rights
   Barr SNA Configuration dialog box
   BARR$SN1 job
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Common questions for BARR/PRINT TCP/IP
   Common questions for Print Utility
   Common questions for printers
   Common questions: Configuring BARR/RJE
   Common questions: Managing connections
   Common questions: Using BARR/RJE
   Communication Link tab
   Configure Multiple Start Times dialog box
   Configuring BARR/NJE for BARR SNA
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring BARR/RJE optional settings
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring the host for Barr SNA or SNA
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring the Remote Spool Window
   Configuring the spool to print to a Xerox printer
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Connection Control tab
   Customizing the retain view
   Customizing the spool view
   Determining the communication paths
   Device Control tab
   Device Properties dialog box
   Forms tab
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with BARR/NJE
   Getting started with BARR/RJE
   HPR/IP Connection Configuration dialog box
   Learning about the RJE Configuration Utility window
   Learning about the Spool Window
   Learning about the User Rights window
   Manually configuring readers
   Modules
   Opening and closing the BARR/NJE utility
   Opening and closing the BARR/RJE utility
   Operator and Advanced rights
   Overview BARR/NJE
   Overview BARR/RJE
   Overview services
   Overview SNA connectivity for NJE
   Overview User Rights Configuration utility
   Passing data to the printer without conversion
   Routing to another BARR/SPOOL
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Troubleshooting printers
   Troubleshooting: Configuring BARR/RJE
   Troubleshooting: Managing connections
   Troubleshooting: Using BARR/RJE
   Using the NJE Console
   Using the RJE Console
   Using the User Rights Configuration utility
   Working with BARR/RJE connections
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with printer initialization files
   Working with spool printers
    Barr File
    Barr Host Communications Suite
    Barr LPR
    BARR RJE
    Barr SNA
    BARR/NJE
       BARR$SN1 job
       Configuring BARR/NJE for BARR SNA
       Configuring JES2 for NJE
       Configuring JES3 for NJE
       Configuring POWER for NJE
       Configuring VTAM for NJE
       Getting started using a Barr SNA connection
       Getting started using an SNA connection
       Overview SNA connectivity for NJE
       Working with NJE connections
    BARR/PRINT TCP/IP
    BARR/RJE
       Common questions: Configuring BARR/RJE
       Configuring BARR/RJE for MS/LUA
       Configuring BARR/RJE optional settings
       Forms tab
       Overview services
       Troubleshooting: Configuring BARR/RJE
    BARR/SPOOL
    clicking
       Configure Multiple Start Times dialog box
       Device Properties dialog box
       HPR/IP Connection Configuration dialog box
    display
    Document
    host
    HPR/IP
    JES2
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
       Configuring BARR/RJE for MS/LUA
       Configuring JES2 for NJE
       Configuring JES2 for RJE
       Modules
    JES3
       Configuring JES3 for NJE
       Configuring JES3 for RJE
    NJE
       Configuring BARR/NJE for BARR SNA
       Configuring the NJE auto-start feature (optional)
       Configuring the NJE auto-start feature using NetView (optional)
    NJE Console window
    open
       Barr SNA Configuration dialog box
       Communication Link tab
    POWER
       Configuring POWER for NJE
       Configuring POWER for RJE
    Print Utility
       Common questions for Print Utility
       Sending files (JCL SYSIN) to the NJE host
       Sending files (JCL SYSIN) to the RJE host
    RJE Console window
    SNA
       Configuring BARR/RJE for MS/LUA
       Determining the communication paths
    specify
    spool
    Spool Window
       Sending files (JCL SYSIN) to the NJE host
       Sending files (JCL SYSIN) to the RJE host
    TCP/IP
    Troubleshooting
    VTAM
       Configuring the NJE auto-start feature (optional)
       Configuring VTAM for NJE
       Configuring VTAM for RJE
Configuring BARR/RJE
   Common questions for the Configuration Utility
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE optional settings
   Getting started with BARR/RJE
   Learning about the RJE Configuration Utility window
    HPR/IP
    Refer
       Configuring BARR/RJE optional settings
       Learning about the RJE Configuration Utility window
Configuring JES2
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
Configuring JES3
   Configuring JES3 for NJE
   Configuring JES3 for RJE
Configuring POWER
   Configuring POWER for NJE
   Configuring POWER for RJE
Confirm
   Available user rights
   Learning about the Retain Window
   Learning about the Spool Window
   Managing services
   Manually configuring readers
   Rule Conditions dialog box
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using the Backup Configuration Utility
   Using the User Rights Configuration utility
   Working with LPD print queues
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with spool printers
    user’s
    Yes
Confirm Delete
   Available user rights
   Learning about the Retain Window
   Learning about the Spool Window
Confirm File Deletion dialog
Confirm Password
Confirmation
   Available user rights
   Installing the software
   Learning about the Retain Window
   Learning about the Spool Window
   Using the Backup Configuration Utility
Confirmation Dialog
   Available user rights
   Learning about the Spool Window
   Using the Backup Configuration Utility
Conform
   Common questions for BARR/NJE
   Communication link parameters
   Configuring VTAM for RJE
   Troubleshooting: Using BARR/RJE
    IBM
       Common questions for BARR/NJE
       Troubleshooting: Using BARR/RJE
Confuse
    Barr
Connect – Connects
    BARR/NJE
Connect Opens
Connect RJE
    Host
CONNECT,SRCVPAC
Connection
   Accounting tab
   Advanced tab LPR port
   Barr SNA Configuration dialog box
   Channel Input Port dialog box
   Commands tab
   Common questions for NJE
   Common questions for Operator Console
   Common questions for Services
   Common questions for TCP/IP
   Common questions: Configuring BARR/RJE
   Common questions: Managing connections
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Configure Multiple Start Times dialog box
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring BARR/RJE optional settings
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring NJE for BARR SNA
   Configuring POWER for RJE
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring the host for Barr SNA or SNA
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Connecting to the host
   Connection Configuration dialog box
   Connection Control tab
   Device Control tab
   Format tab
   Forms tab
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with LPD
   Getting started with NJE
   Installing the software
   Interpreting RJE diagnostic data
   Job header general section
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Connection Manager window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   LPD header fields
   LPD tab
   Managing spool printers
   Manually configuring readers
   NJE Configuration dialog box
   Opening and closing the BARR/RJE utility
   Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
   Options dialog box Operator Console
   Overview BHCS
   Overview NJE
   Overview Print Utility
   Overview RJE
   Overview services
   Overview SNA connectivity for NJE
   Overview TCP/IP
   POWER commands for NJE
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Redirecting print files (SYSOUT) to the host
   Remote definition
   RJE concepts
   RJE Description tab
   Routing tab
   Routing to another BHCS
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   SNA Configuration dialog box
   Splitting jobs
   Spool and Retain tab
   Supported RFC1179 features
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE connections
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using the NJE Console
   Using the RJE Connection Manager
   Using the RJE Console
   Using the RJE Diagnostics utility
   Working with BARR/RJE connections
   Working with LPD print queues
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with overlays
   Working with TCP/IP sockets
   Working with the accounting system
    command stops
    Enter
       Working with BARR/RJE connections
       Working with the accounting system
    finish configuring
       Configuring RJE for HPR/IP (Enterprise Extender)
       Configuring RJE for MS/LUA
       Configuring RJE optional settings
       Working with RJE connections
    first use
    select
    selecting
Connection-specific
   Learning about the RJE Configuration Utility window
   Overview BARR/RJE
Connection Displays
Connection Configuration dialog box
Connection Control
Connection fails
Connection Manager
   Common questions: Managing connections
   Learning about the Spool Window
    viewing
Connection Properties dialog
   Common questions: Configuring BARR/RJE
   Common questions: Managing connections
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Troubleshooting: Managing connections
   Working with BARR/RJE connections
Connection shares
   Learning about the NJE Console window
   Overview NJE
Connection string
   Accounting tab
   Working with the accounting system
    use
Connection string which
Connection Test3
Connection Type
   Barr SNA Configuration dialog box
   Common questions: Configuring RJE
   Communication Link tab
   Communications Profile tab
   Configuring the host for Barr SNA or SNA
   Connection Configuration dialog box
   Interpreting RJE diagnostic data
   Learning about the RJE Diagnostics window
   Overview RJE
   Overview SNA connectivity for NJE
   Troubleshooting NJE
   Troubleshooting RJE connections
   Using the RJE Diagnostics utility
   Working with NJE connections
ConnectionName
ConnectionName_ConsoleLog.txt
   Configuring BARR/RJE optional settings
   Connection Control tab
   Using the RJE Console
    name
ConnectionName_DiagLogN.txt
   Learning about the RJE Diagnostics window
   Using the RJE Diagnostics utility
Connections button
   Learning about the RJE Configuration Utility window
   Select Connection dialog box
Connections routing
Connects
   Accounting tab
   Advanced tab LPR port
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Choosing the correct account type
   Common questions for Operator Console
   Common questions for printers
   Common questions: Configuring RJE
   Common questions: Managing connections
   Communicating with the NJE host
   Communication link parameters
   Communication Link tab
   Configure Multiple Start Times dialog box
   Configuring JES2 for NJE
   Configuring JES3 for NJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring the NJE auto-start feature using NetView (optional)
   Connecting to the host
   Connection Control tab
   Determining the communication paths
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with NJE
   Getting started with printers
   Getting started with RJE
   Getting started with TRANSFORM (ADEPT Suite)
   Interpreting RJE diagnostic data
   IP Configuration tab
   Job tab
   Learning about the NJE Console window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Overview BARR/PRINT to EPS
   Overview NJE
   Overview printers
   Overview RJE
   Overview SNA connectivity for NJE
   Preferences tab
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Xerox printer
   Product features
   Remote definition
   RJE concepts
   RJE Description tab
   Routing tab
   Routing to another BHCS
   Select Connection dialog box
   Set Destination Node dialog box
   Spool file processing
   Troubleshooting BARR/NJE
   Troubleshooting NJE Console
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting: Configuring BARR/RJE
   Using BARR/TRAN
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
   Using the NJE Console
   Using the RJE Console
   Welcome
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with RJE connections
   Working with the accounting system
   Writing to a TCP/IP socket
    BARR NJE
    host
    IBM
       Product features
       Welcome
    IP
    menu bar
    Microsoft SNA Server
    RJE
       Connecting to the host
       Learning about the RJE Console window
    SNA Server
    VPS
    Windows
CONS
   Remote definition
   RJE Description tab
Consisting
   Configuring JES2 for NJE
   File and record formats
   JES2 commands for RJE
   Learning about JCL (SYSIN) jobs
   modules
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Overview NJE
   Rules Editor dialog box
   Searching the Help
   Troubleshooting printers
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
    condition
    IBM
Consists
   Advanced tab LPR port
   Banner Options dialog box
   Common questions for SPOOL
   Common questions: Using RJE
   Data set header 3800 section
   Enhanced channel skip processing
   Format tab
   Job header general section
   Learning about the RJE Configuration Utility window
   Overlay Options dialog box
   Overview printers
   Overview RJE
   Rules Editor dialog box
   Troubleshooting printers
   Using the Help
Console
   Display Properties tab
   Learning about the NJE Console window
   Learning about the RJE Console window
   Opening and closing the BARR/RJE utility
   Overview RJE
   Remote definition
   Using BARR job for the NJE auto-start configuration
    BARR
    displays
    NJE
Console Class
   Data set header security section
   Job header security section
Console identifier
Console view
   Display Properties tab
   Learning about the NJE Console window
   Learning about the RJE Console window
   Troubleshooting using RJE
   Using the RJE Console
Console window
   Display Properties tab
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the RJE Console window
   Preferences tab
   Using the NJE Console
   Using the Operator Console
   Using the RJE Console
CONSOLE,JNAME
   Configuring JES3 for RJE
   Remote definition
Consult
   JES2 commands for RJE
   Operator commands for NJE
   Operator commands for RJE
   Overview TCP/IP
   Overview Technical Support
   Troubleshooting Spool Window
   Using BARR/TRAN
   Working with page layouts
    Xerox
CONT,DISCNT
Contact
   Barr SNA Configuration dialog box
   Capturing diagnostics
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
   Contacting Barr Systems
   Getting help
   Identifying Barr components
   Installing the software
   Interpreting Barr Messages
   Learning about the Diagnostics Utility window
   Locating diagnostic files
   Notes tab
   Overview RJE
   Overview Technical Support
   SNA Configuration dialog box
   Troubleshooting Configuration Utility
   Troubleshooting RJE Communication scope characters
   Troubleshooting Spool Window
   Version and trademark
   Working with notes
    Barr Systems
    Support
    Technical Support
Contact IBM
   Configuring JES2 for RJE
   Configuring JES3 for RJE
   Configuring POWER for RJE
Contact possess
Contain intervening spaces
Contain tips
    setting
Containing beginning overlays
Contains
   Adding files to the spool
   Advanced Printer Options dialog box
   Assigning document attribute values
   Automatic Spooling tab
   Banner Options dialog box
   BARR information fields
   Barr Retain information fields
   BARR$SN1 job
   Commands tab
   Common questions for BARR/PRINT to EPS
   Common questions for Print Utility
   Common questions for printers
   Common questions for Services
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Communication link parameters
   Compressing data
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring RJE optional settings
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Connecting to the host
   Connection Control tab
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Data set header POWER section
   Data set header security section
   Define Page Layout dialog box
   Device Control tab
   Device Properties dialog box
   Display Properties tab
   Encrypting data
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   File Properties dialog box
   Format tab
   Getting started with BARR/SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Headers From Data Configuration dialog box
   HPR/IP Connection Configuration dialog box
   Information on document status
   Insert Field dialog box
   Installing the software
   IP Configuration tab
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for RJE
   Job header accounting section
   Job header general section
   Job header JES2 section
   Job header POWER section
   Job header security section
   Job tab
   Job trailer general section
   Learning about JCL (SYSIN) jobs
   Learning about the HTML help window
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the Spool Window
   Logmode table entry
   LPD header fields
   LPD tab
   Managing document rights
   Managing spool documents
   Manually configuring readers
   Modules
   Operator and Advanced rights
   Options tab
   Overlay Options dialog box
   Overview Header fields
   Overview LPR
   Overview Spool Window
   Overview Technical Support
   Overview TOOLS
   Parsing a long header field into separate fields
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Redirecting print files (SYSOUT) to the host
   Remote definition
   RJE Description tab
   Routing to another BHCS
   Rule Actions dialog box
   Searching the Help
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Sending jobs to the host
   Special formats
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Transform Configuration dialog box
   Troubleshooting BARR/PRINT to EPS
   Troubleshooting Configuration Utility
   Troubleshooting Configuring RJE
   Troubleshooting Make FCB
   Troubleshooting NJE
   Troubleshooting NJE Console
   Troubleshooting Operator Console
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting Retain Window
   Troubleshooting RJE
   Troubleshooting RJE Communication scope characters
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting Technical Support
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the Help
   Using the Make Banner utility
   Using the NJE Console
   Using the Operator Console
   Using the PRT utility
   Using the RJE Console
   Using the RJE Diagnostics utility
   Working with inline Xerox resources
   Working with LPD print queues
   Working with NJE profiles
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with printer initialization files
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Working with the INI file
   Writing to a TCP/IP socket
   Writing to disk
   Xerox file formats
    3211
       File Format tab File Port
       File Format tab IP Port
    5A
    6,000
    Advanced Function Printer
    ASA
       File Format tab File Port
       File Format tab IP Port
       Using BARR/TRAN
    ASCII file
    Barr
    Barr Host Communications Suite
    BARR$SN
    BARR/TRAN
    Contents
    FCB
       Troubleshooting Spool Window
       Using the Data Conversion Utility
    FCB file
    IDBLK
       Communication link parameters
       Configuring VTAM for NJE
       HPR/IP Connection Configuration dialog box
    logmode
    Machine Carriage Control
    PU
       Configuring the NJE auto-start feature (optional)
       Configuring VTAM for NJE
       Configuring VTAM for RJE
    Xerox Metacode
       Modules
       Spool and Retain tab
    XML
Content tab
   Content tab
   Learning about the HTML help window
   Using the Help
Contents
   Common questions for Print Utility
   Compressing data
   Content tab
   Encrypting data
   Getting help
   Learning about the HTML help window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Managing spool documents
   Overview Configuration Utility
   Overview Technical Support
   Remote definition
   Removing the Barr software
   Special formats
   Troubleshooting using RJE
   Using BARR/TRAN
   Using the Help
   Using the NJE Console
   Using the RJE Console
   Using the RJE Diagnostics utility
   Working with the INI file
    containing
    Print Prints
       Learning about the Make Banner window
       Learning about the Operator Console window
       Learning about the RJE Diagnostics window
Contents list
Continuation-of-Record
Continue
   Adding files to the spool
   Advanced tab LPR port
   Common questions for Print Utility
   Common questions for Spool Window
   File and record formats
   Interpreting Barr Messages
   Learning about JCL (SYSIN) jobs
   Learning about the Spool Window
   LPD tab
   Managing spool printers
   Manual Spooling tab
   Options dialog box Operator Console
   Overview services
   Overview Spool Window
   Printer Properties dialog box
   Rule Actions dialog box
   Socket tab
   Troubleshooting printers
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the FCB utility
   Using the NJE Console
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Diagnostics utility
   Using the Viewer
   Working with the accounting system
    select
    Yes
continue adding
Continue printing
   Printer Properties dialog box
   Working with the accounting system
Continue printing � Printing continues
Control
   Adding files to the spool
   Advanced tab LPR port
   Assigning document attribute values
   BARR information fields
   Barr Retain information fields
   Capturing a TCP/IP socket trace
   Capturing an LPD trace
   Choosing ports and device drivers
   Choosing the correct account type
   Common questions for BARR/PRINT TCP/IP
   Common questions for Print Utility
   Common questions for printers
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions: Using BARR/RJE
   Communication link parameters
   Compressing data
   Configure Multiple Start Times dialog box
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE optional settings
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Connection Control tab
   Content tab
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Data set header POWER section
   Device Control tab
   Downloading host resources using NJE
   Encrypting data
   Enhanced channel skip processing
   File and record formats
   File Properties dialog box
   Format tab
   Forms command strings
   Forms tab
   Getting help
   HPR/IP Connection Configuration dialog box
   Information on document status
   Installing the software
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Job header general section
   Job tab
   Learning about the Backup Configuration Utility window
   Learning about the Make FCB window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   Lines-per-form and lines-per-inch settings
   Link tab HPR/IP
   Locating diagnostic files
   Logmode table entry
   LPD header fields
   LPD tab
   Managing document rights
   Managing spool printers
   Manual Spooling tab
   Modules
   Opening and closing the Make FCB utility
   Opening and closing the NJE utilities
   Opening and closing the RJE utilities
   Options dialog box Operator Console
   Overview BARR/PRINT to EPS
   Overview Make FCB
   Overview NJE
   Overview product
   Overview services
   Overview SNA connectivity for NJE
   Overview SPOOL
   Overview TCP/IP
   Overview Technical Support
   Product features
   Remote definition
   RJE concepts
   RJE Description tab
   Routing to another BHCS
   Searching the Help
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Socket tab
   Spool file processing
   Spool Printers tab
   Supported RFC1179 features
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR/TRAN
   Using LPR switches
   Using the Help
   Using the PRT utility
   Using the RJE Console
   Welcome
   Working with LPD print queues
   Working with overlays
   Working with override tables
   Working with Print Utility control files
   Working with spool printers
   Xerox file formats
    3211
    ASA
       Common questions: Using BARR/RJE
       Data set header general section
       Spool file processing
    Barr Host Communications Suite
    computer program
       Data set header LPD/user custom section
       Lines-per-form and lines-per-inch settings
    JES2
       JES2 commands for NJE
       JES2 commands for RJE
    LPD
Control Buffers
Control Codes
   Data set header LPD/user custom section
   Lines-per-form and lines-per-inch settings
Control File Field
Control File Flag
   Common questions for TCP/IP
   Format tab
   LPD header fields
Control file follows
Control file last
   Common questions for printers
   Job tab
   Spool Printers tab
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Using LPR switches
Control files
   Adding files to the spool
   Assigning document attribute values
   Common questions for printers
   Common questions for TCP/IP
   Compressing data
   Data set header LPD/user custom section
   Encrypting data
   File Properties dialog box
   Format tab
   Job tab
   LPD header fields
   Managing document rights
   Manual Spooling tab
   Overview TCP/IP
   Routing to another BHCS
   Sending files (JCL SYSIN) to the RJE host
   Spool file processing
   Spool Printers tab
   Supported RFC1179 features
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting TCP/IP
   Using LPR switches
   Using the PRT utility
   Working with control files
   Working with LPD print queues
Control Panel
   Common questions for printers
   Learning about the RJE Console window
   Using the RJE Console
Control Panel's Regional
   Common questions for Spool Window
   Configure Multiple Start Times dialog box
   Connection Control tab
   Learning about the Spool Window
Control Panel's Regional Settings
   Common questions for Spool Window
   Configure Multiple Start Times dialog box
   Connection Control tab
   Learning about the Spool Window
    BHCS uses
       Common questions for Spool Window
       Learning about the Spool Window
    BHCSes
    open
    RJE uses
       Configure Multiple Start Times dialog box
       Connection Control tab
Control which jobs
    spool printer
Controlfile
Controller
   Choosing the correct account type
   Common questions for BARR/PRINT to EPS
   Communication link parameters
   Configuring POWER for NJE
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Interpreting RJE diagnostic data
   Troubleshooting Configuration Utility
   Troubleshooting Spool Window
    Barr
    Host RJE
Controller pacing
Controls printing
Conversion – The
Conversion DCO
Conversions
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Automatic Spooling tab
   Common questions for Print Utility
   Common questions for printers
   Common questions for TCP/IP
   Common questions: Using RJE
   Data set header internal custom section
   Device Properties dialog box
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   Format tab
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   LPD tab
   Manually configuring readers
   Overview BARR/PRINT to EPS
   Passing data to the printer without conversion
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BHCS
   Sending jobs to the host
   Socket tab
   Special formats
   Spool file processing
   Transform Configuration dialog box
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Using BARR/TRAN
   Using the Data Conversion Utility
   Working with LPD print queues
   Working with overlays
   Working with RJE connections
   Working with TCP/IP sockets
   Writing to a TCP/IP socket
   Writing to disk
    modify
    Select
    step during
CONVERT
Converted during
    import
Converts
   Advanced Printer Options dialog box
   Chain Selection dialog box
   Common questions for BARR/TOOLS and BARR/TRANSFORMS
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for the Configuration Utility
   Common questions: Using BARR/RJE
   Data set header general section
   Data set header internal custom section
   Device Properties dialog box
   Enhanced channel skip processing
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   Format Columns dialog box
   Format tab
   Getting started with SPOOL
   Getting started with TOOLS
   Import Override Table Files dialog box
   Information on document status
   Job header general section
   Learning about the Spool Window
   Modules
   Options dialog box Operator Console
   Output statements
   Override Table tab
   Overview Print Utility
   Overview TOOLS
   Overview TRANSFORM
   Passing data to the printer without conversion
   Sending JCL files with an embedded command
   Special formats
   Spool file processing
   Tell me about printers
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting using RJE
   Using BARR/TRAN
   Using the Data Conversion Utility
   Using the RJE Console
   Working with BARR/RJE connections
   Working with inline Xerox resources
   Working with overlays
   Working with override tables
   Working with spool printers
    ASCII
    ASCII 31 31
    BARR/TRAN
    FATs
    PDF
       Common questions for BARR/TOOLS and BARR/TRANSFORMS
       Data set header internal custom section
       Learning about the Spool Window
    PRR
    SCB
    SCS
       Common questions: Using BARR/RJE
       Spool file processing
       Using the Data Conversion Utility
    want
Converts Barr file
   File Format tab File Port
   File Format tab IP Port
Converts PRR
Converts RJE Punch
Converts VBM
Converts VM
COOL',TIME
COPIES
   Learning about JCL (SYSIN) jobs
   Output statements
Copy
   Adding files to the spool
   Automatic Spooling tab
   Available user rights
   Banner Options dialog box
   BARR information fields
   Barr Retain information fields
   Common questions for NJE
   Common questions for Spool Window
   Common questions for TRANSFORMS
   Configuring RJE optional settings
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header output processing section
   Device Control tab
   Device Properties dialog box
   Enabling and disabling the retain feature
   Enabling the 'Print directly to the printer' setting
   File Options tab
   File Properties dialog box
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Getting started with Retain Window
   Getting started with SPOOL
   Installing the software
   JES2 commands for RJE
   Job header general section
   Job trailer general section
   Learning about JCL (SYSIN) jobs
   Learning about the Make Banner window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the Viewer window
   Logmode table entry
   LPD header fields
   Managing document rights
   Managing spool documents
   Managing spool printers
   Manual Spooling tab
   Opening and closing the Spool Window utility
   Operator and Advanced rights
   Options tab
   Output statements
   Overlay Options dialog box
   Overview BHCS
   Overview LPR
   Overview Retain Window
   Overview Spool Window
   Overview TCP/IP
   Overview Viewer
   Port Properties dialog box
   Printer Groups tab
   Remote definition
   RJE Description tab
   Routing tab
   Rule Actions dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Spool and Retain tab
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Transform Configuration dialog box
   Troubleshooting BARR/NJE
   Troubleshooting printers
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Using LPR switches
   Using the Add Sort Criteria Wizard
   Using the Help
   Using the LPR command line approach
   Using the Operator Console
   Using the PRT utility
   Using the Viewer
   Working with banners
   Working with BARR/RJE connections
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with printer groups
   Working with retained documents
   Working with spool printers
    10
    10-MB
    AFP
    BATCH
       Logmode table entry
       RJE Description tab
    before sending
       Adding files to the spool
       File Properties dialog box
       Port Properties dialog box
       Sending files (JCL SYSIN) to the NJE host
       Sending files (JCL SYSIN) to the RJE host
       Spooling Properties dialog box
    ISTINCLM BATCH logmode
    PCL
       Getting started with BARR/TOOLS
       Getting started with BARR/TRANSFORM (ADEPT Suite)
    selecting
    Spool Window
       Spool Printers tab
       Working with spool printers
    WINRUI32.DLL
    Xerox
       Getting started with BARR/TOOLS
       Getting started with BARR/TRANSFORM (ADEPT Suite)
Copy Copies
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the RJE Console window
   Learning about the Viewer window
Copy button
   Learning about the RJE Configuration Utility window
   Printer Groups tab
   Using the Viewer
    toolbar
Copy Connection dialog
Copy count beginning
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
Copy Counts
   Available user rights
   Common questions for Spool Window
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   File Options tab
   Job header general section
   Managing document rights
   Troubleshooting printers
Copy prints
COPYG
Copyright 1999-2000
    Apache Software Foundation
Copyright 1999-2000 The Apache Software Foundation
COPYSEP
COR
Correspond
   Advanced Printer Options dialog box
   Commands tab
   Configuring NJE for BARR SNA
   Configuring RJE optional settings
   Custom Filter dialog box
   Data set header internal custom section
   Format Columns dialog box
   Getting started with SPOOL
   Learning about the Backup Configuration Utility window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Lines-per-form and lines-per-inch settings
   LPD header fields
   Modifying a printer's port settings
   Overview Configuration Utility
   Overview Technical Support
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Remote definition
   RJE concepts
   Select Header Fields dialog box
   Sending jobs to the host
   Spool and Retain tab
   Spool file processing
   Troubleshooting using RJE
   Using BARR job for the NJE auto-start configuration
   Working with overlays
   Working with printer initialization files
   Working with spool printers
Corresponding
   Configuring BARR/NJE for BARR SNA
   Data set header internal custom section
   LPD header fields
   Overview Technical Support
   Remote definition
   Spool and Retain tab
    BARR's
    CHARS JCL
       Data set header internal custom section
       LPD header fields
    FORMDEF JCL
       Data set header internal custom section
       LPD header fields
    LPR
    PAGEDEF JCL
       Data set header internal custom section
       LPD header fields
    problem’s
    Retain Window
    TRC JCL
       Data set header internal custom section
       LPD header fields
    VTAM PU
Corrupt FCBs
COS
    set
Count
   Available user rights
   Common questions for Print Utility
   Common questions for Spool Window
   Communication link parameters
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Data set header 3800 section
   Data set header general section
   Device Properties dialog box
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   Headers From Data Configuration dialog box
   HPR/IP Connection Configuration dialog box
   JES2 commands for RJE
   Job header general section
   Modules
   Operator and Advanced rights
   Options tab
   Output statements
   Overview TOOLS
   Remote definition
   Sending JCL files with an embedded command
   Splitting jobs
   Spool and Retain tab
   Supported RFC1179 features
   Troubleshooting using RJE
   Using BARR/TRAN
    NJE
    NJE SYSOUT
Courier
   Common questions for printers
   Working with page layouts
CP
   Configuring TCP/IP and VTAM for HPR/IP
   Data set header 3800 section
   Data set header general section
   Data set header RSCS section
    Originating
CP DEVTYPE AND RANGES
    See
CP file
CP file Type
CP FORM
CP MOD
CP SPOOL
   Data set header 3800 section
   Data set header general section
CP TAG
   Data set header 3800 section
   Data set header general section
CPCP
CPDS
CPNAME
   Configuring BARR/NJE for BARR SNA
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring TCP/IP and VTAM for HPR/IP
   Link tab HPR/IP
    Enter
       Configuring BARR/NJE for BARR SNA
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
    match
    specified
       Configuring BARR/NJE for BARR SNA
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
       Link tab HPR/IP
CPTSPMN1
CPU
   Common questions for BARR/NJE
   Job header general section
   Overview services
   Using BARR/TRAN
CR
   Data set header internal custom section
   File Format tab File Port
   Lines-per-form and lines-per-inch settings
   Output statements
   Sending JCL files with an embedded command
   Special formats
   Supported RFC1179 features
   Using BARR/TRAN
   Using the Data Conversion Utility
CR ETX
CR FF
   Supported RFC1179 features
   Using the Data Conversion Utility
CR LF
   Data set header internal custom section
   File Format tab File Port
   Lines-per-form and lines-per-inch settings
   Output statements
   Sending JCL files with an embedded command
   Using BARR/TRAN
   Using the Data Conversion Utility
CR LF FF
CR LFs
    number
CRC
Create
   Accounting tab
   Adding files to the spool
   Automatic Spooling tab
   Chain Selection dialog box
   Choosing the correct account type
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for SPOOL
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Communications Profile tab
   Compressing data
   Configure Multiple Start Times dialog box
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring BARR/RJE optional settings
   Configuring NJE for BARR SNA
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring the NJE auto-start feature (optional)
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Connecting to the host
   Customizing the retain view
   Customizing the spool view
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header POWER section
   Data set header RCCS section
   Data set header RSCS section
   Data set header security section
   Define Page Layout dialog box
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   File and record formats
   File Options tab
   File Properties dialog box
   Format tab
   Getting help
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Getting started with Make Banner
   Getting started with SPOOL
   Information on document status
   Installing the software
   JES2 commands for RJE
   Job header general section
   Job header security section
   Learning about the Backup Configuration Utility window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the Spool Window
   Logmode table entry
   LPD header fields
   LPD tab
   Managing document rights
   Managing spool documents
   Manual Spooling tab
   Manually configuring readers
   Modifying the default spool folders
   Options dialog box Operator Console
   Overlay Options dialog box
   Override Table tab
   Overview BHCS
   Overview Make FCB
   Overview NJE
   Page Layout tab
   Passing data to the printer without conversion
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a Windows printer
   Printing to a Xerox printer
   Remote definition
   Removing the Barr software
   Resource Folders tab
   Routing tab
   Routing to another BHCS
   Rule Conditions dialog box
   Rules Editor dialog box
   Searching the Help
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Transform Configuration dialog box
   Troubleshooting BARR/NJE
   Troubleshooting Configuration Utility
   Troubleshooting Make FCB
   Troubleshooting printers
   Troubleshooting Retain Window
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting: Using BARR/RJE
   Using an override table to auto-assign header fields
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the FCB utility
   Using the NJE Console
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Diagnostics utility
   Using the User Rights Configuration utility
   Working with BARR/RJE connections
   Working with LPD print queues
   Working with NJE routing tables
   Working with notes
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with Print Utility control files
   Working with printer groups
   Working with printer initialization files
   Working with retained documents
   Working with spool printers
   Working with the accounting system
   Working with the INI file
   Writing to a TCP/IP socket
   Writing to disk
   Xerox file formats
    Add
       Managing document rights
       Working with override tables
    Barr
    BARR/TRAN
    clear
    Communications Suite
    Data Set Header
    DCO
    DEFAULT.INI file
       Getting started with BARR/TOOLS
       Getting started with BARR/TRANSFORM (ADEPT Suite)
    FCB
       Overview Make FCB
       Troubleshooting Make FCB
    logmode
       Configuring VTAM for NJE
       Troubleshooting BARR/NJE
    LU
    Name
    new
    new document
    new log file
    NUL
    Operator Console
    PDIR
    RJE
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
       Configuring BARR/RJE for MS/LUA
       Configuring BARR/RJE optional settings
       Working with BARR/RJE connections
    subfolder
       Troubleshooting printers
       Working with overlays
    SYSOUT
Create Shortcut
Created during
   Customizing the spool view
   Removing the Barr software
   Supported RFC1179 features
   Working with RJE connections
   Working with spool printers
    export
    import
       Working with RJE connections
       Working with spool printers
Created during program
CreateGlobalResources
Creates routing
Creates Windows Registry
Creates XSGF
Critical
   Common questions: Managing connections
   Common questions: Using RJE
   Configuring the host for Barr SNA or SNA
   Connecting to the host
   Connection Control tab
   Interpreting Barr Messages
   Opening and closing the RJE utilities
   Options dialog box Operator Console
   Overview Technical Support
   Splitting jobs
   Spool and Retain tab
   Troubleshooting Operator Console
   Using the Operator Console
    level
    set
CRLF
   Common questions for BARR/NJE
   Using the Data Conversion Utility
    removing
CTC
   Configuring JES2 for NJE
   Configuring VTAM for NJE
   Connection Configuration dialog box
   Redirecting print files (SYSOUT) to the host
CTC Configuration
CTC Configuration dialog
CTC connection
   Configuring JES2 for NJE
   Configuring VTAM for NJE
   Redirecting print files (SYSOUT) to the host
CTC NJE
CTEXT
Ctr
   Learning about the Backup Configuration Utility window
   Manual Spooling tab
   Removing the Barr software
   Working with control files
CTRL
   Configuring the NJE auto-start feature using NetView (optional)
   Managing spool documents
   Managing spool printers
   Using the Add Sort Criteria Wizard
   Using the User Rights Configuration utility
   Working with spool printers
    use
CTRL key
   Managing spool documents
   Managing spool printers
   Using the User Rights Configuration utility
   Working with spool printers
CTRL+ENTER
   Common questions: Using BARR/RJE
   Configuring BARR/RJE optional settings
   Connection Control tab
    pressing
       Common questions: Using BARR/RJE
       Configuring BARR/RJE optional settings
       Connection Control tab
CTS
CTST
CTST,HOLD
Current
   Adding files to the spool
   Choosing the correct account type
   Common questions for Spool Window
   Configuring RJE optional settings
   Connecting to the host
   Connection Control tab
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   Enabling and disabling the retain feature
   File and record formats
   Format tab
   Information on printer status
   Installing the software
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for RJE
   Learning about the Backup Configuration Utility window
   Learning about the HTML help window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the Viewer window
   Managing spool printers
   Manual Spooling tab
   Opening and closing the RJE utilities
   Overview Backup Configuration Utility
   Overview LP command line
   Overview Technical Support
   Retain Start/End Date & Time dialog box
   Routing tab
   Select Code Pages dialog box
   Set Destination Node dialog box
   Special formats
   Spool and Retain tab
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting Retain Window
   Troubleshooting SPOOL
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the Help
   Using the LPQ command line approach
   Using the LPRM command line approach
   Using the Make Banner utility
   Using the NJE Console
   Using the Operator Console
   Using the RJE Console
   Using the RJE Diagnostics utility
   Using the Viewer
   Working with NJE routing tables
    DCOs
    job completes
       JES2 commands for NJE
       JES2 commands for RJE
Current heading
Current printing
Current routing tables
Currently
   Adding files to the spool
   Assigned user rights
   Choosing the correct account type
   Common questions for Spool Window
   Common questions: Configuring RJE
   Communications Profile tab
   Compressing data
   Configuring NJE for BARR SNA
   Custom Filter dialog box
   Data set header internal custom section
   Data set header POWER section
   File and record formats
   Forms tab
   Getting started with SPOOL
   Information on document status
   Information on printer status
   Installing the software
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the Spool Window
   Manual Spooling tab
   NJE Configuration dialog box
   Notes tab
   Overview BHCS
   Printer Properties dialog box
   Remote definition
   Routing tab
   Select Connection dialog box
   Supported RFC1179 features
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Using the Help
   Working with Print Utility control files
    packing
Currently allocated regions
    packing
Currently printing
   JES2 commands for RJE
   Printer Properties dialog box
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
    finish
    job
Currently printing on dev
Currently printing on printer
CurrentVersion
Custom
   Chain Selection dialog box
   Common questions for BARR/PRINT to EPS
   Common questions for NJE
   Common questions for Print Utility
   Common questions for SPOOL
   Common questions for TCP/IP
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   Data set header LPD/user custom section
   Device Properties dialog box
   Display Properties tab
   Format tab
   Learning about the Backup Configuration Utility window
   Learning about the Retain Window
   Learning about the Spool Window
   Overview Backup Configuration Utility
   Overview Header fields
   RJE Description tab
   Supported RFC1179 features
   Troubleshooting Spool Window
   Using LPR switches
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
Custom accounting
Custom chain
Custom file
   Chain Selection dialog box
   Device Properties dialog box
   Format tab
   Supported RFC1179 features
    select
Custom Filter
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Learning about the Retain Window
   Learning about the Spool Window
    menu bar
    selecting
Custom Filter dialog
   Custom Filter dialog box
   Learning about the Retain Window
   Learning about the Spool Window
    Opens
       Learning about the Retain Window
       Learning about the Spool Window
Custom Filter dialog box
   Custom Filter dialog box
   Learning about the Retain Window
   Learning about the Spool Window
Custom Job Name
   Common questions for BARR/PRINT to EPS
   Common questions for BARR/SPOOL
   Common questions for Print Utility
   Data set header LPD/user custom section
   Troubleshooting Spool Window
Custom User
   Data set header LPD/user custom section
   Using the LPQ command line approach
   Using the LPRM command line approach
Custom Windows
Customer training You
Customizing
   Customizing the retain view
   Customizing the spool view
    view
       Customizing the retain view
       Customizing the spool view
Cut off
   Common questions: Configuring BARR/RJE
   File and record formats
CvtResDir
Cwd