<<

D-Print DVI file
D – LPD/user
D ASCIIASA
D DATA
   JES2 commands for NJE
   JES2 commands for RJE
D DISP
D J1-32767
   JES2 commands for NJE
   JES2 commands for RJE
D J1-99999
D J234,J534
   JES2 commands for NJE
   JES2 commands for RJE
D J244
   JES2 commands for NJE
   JES2 commands for RJE
D Jnnnn
   JES2 commands for NJE
   JES2 commands for RJE
D jobname
   JES2 commands for NJE
   JES2 commands for RJE
D LST1
   POWER commands for NJE
   POWER commands for RJE
D MR0,yes
   JES2 commands for NJE
   JES2 commands for RJE
D MRx,message
   JES2 commands for NJE
   JES2 commands for RJE
D N,Q
   JES2 commands for NJE
   JES2 commands for RJE
D Q,Q
   JES2 commands for NJE
   JES2 commands for RJE
D queue,jobname,jobid
D U,LGN
   JES2 commands for NJE
   JES2 commands for RJE
D U,PR1
D U,RMT4
D U,RMTnn
D U,RMTnnnn
D,MSGLEVEL
D_Files
    Host
DA
Daemon
   Overview BARR/PRINT TCP/IP
   Overview LPR
   Supported RFC1179 features
Dallas
DATA
   Advanced Printer Options dialog box
   Capturing diagnostics
   Choosing files to include in the diagnostics
   Common questions for BARR/SPOOL
   Compressing data
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Encrypting data
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   JES2 commands for NJE
   JES2 commands for RJE
   Learning about the Diagnostics Utility window
   Lines-per-form and lines-per-inch settings
   Locating diagnostic files
   Overview Diagnostics Utility
   Overview Retain Window
   Passing data to the printer without conversion
   POWER commands for NJE
   Sending JCL files with an embedded command
   Troubleshooting printers
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Working with spool printers
    Compressing
    duplicate copy
    Encrypting
    filter
       Custom Filter dialog box
       Customizing the retain view
       Customizing the spool view
    specify
       File Format tab File Port
       File Format tab IP Port
    use
Data Carrier Detected
Data Control Block
Data Conversion Object
   Chain Selection dialog box
   Format tab
   Using the Data Conversion Utility
Data Conversion Utility
    Open
Data definition statements
DATA FILES/FILE1"/B
DATA FILES/INIT2
Data folder
Data Format Applied
Data formatted
   Advanced Printer Options dialog box
   Common questions for NJE
   Common questions: Using RJE
   File Format tab File Port
   File Format tab IP Port
   Passing data to the printer without conversion
   Select Code Pages dialog box
   Spool file processing
   Working with spool printers
    its ultimate destination
       Advanced Printer Options dialog box
       Passing data to the printer without conversion
       Working with spool printers
Data length
   Communication link parameters
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Data set header output processing section
   HPR/IP Connection Configuration dialog box
   Using BARR/TRAN
Data Link Control
Data Send Failure
DATA SET BLOCK
Data set during
Data set End
Data set End tag
Data set follows
    immediately
Data set header 3800 section
Data set header during execution
Data Set Header General Section
   Configuring the spool to print to a Xerox printer
   Data set header general section
   Managing document rights
   Redirecting print files (SYSOUT) to the host
   Sending files (JCL SYSIN) to the NJE host
   Troubleshooting BARR/PRINT TCP/IP
   Using BARR job for the NJE auto-start configuration
    select
    sets
Data Set Header Internal Custom
   Compressing data
   Data set header internal custom section
   Encrypting data
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Managing document rights
   Troubleshooting printers
   Using BARR job for the NJE auto-start configuration
   Using the Data Conversion Utility
Data Set Header Internal Custom Section
   Compressing data
   Data set header internal custom section
   Encrypting data
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Getting started with TOOLS
   Managing document rights
   Troubleshooting printers
   Using BARR job for the NJE auto-start configuration
   Using the Data Conversion Utility
Data Set Header LPD/User Custom Section
   Data set header LPD/user custom section
   Troubleshooting BARR/PRINT TCP/IP
Data Set Header Overrides
   Common questions for BARR/SPOOL
   Common questions for the Configuration Utility
   Managing document rights
   Troubleshooting Configuration Utility
   Using an override table to auto-assign header fields
   Working with override tables
Data set header RCCS section
Data set header security section
Data Set Header User Custom Section/LPD
   Common questions for BARR/PRINT TCP/IP
   Common questions for Print Utility
   Troubleshooting Configuration Utility
    Select
Data Set Headers
   Common questions for BARR/SPOOL
   Common questions for Print Utility
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Compressing data
   Configuring the spool to print to a Xerox printer
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Data set header POWER section
   Data set header RCCS section
   Data set header RSCS section
   Data set header security section
   Device Control tab
   Device Properties dialog box
   Encrypting data
   File and record formats
   Forms tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Job header general section
   Learning about the Viewer window
   Managing document rights
   Overview Header fields
   Redirecting print files (SYSOUT) to the host
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Sending files (JCL SYSIN) to the NJE host
   Splitting jobs
   Spool and Retain tab
   Troubleshooting BARR/PRINT TCP/IP
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Working with override tables
    create
Data Set Internal Custom Section
   Managing document rights
   Managing spool documents
   Working with retained documents
Data Set Name
   BARR$SN1 job
   Common questions for BARR/SPOOL
   Common questions for NJE
   Data set header general section
   Using BARR/TRAN
Data Set Ready
Data set/Report
Data Sets
   Advanced Printer Options dialog box
   Assigning document attribute values
   Banner Options dialog box
   BARR$SN1 job
   Common questions for NJE
   Common questions for Print Utility
   Common questions for SPOOL
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Communicating with the NJE host
   Compressing data
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring the spool to print to a Xerox printer
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Data set header POWER section
   Data set header RCCS section
   Data set header RSCS section
   Data set header security section
   Device Control tab
   Device Properties dialog box
   Downloading host resources using NJE
   Encrypting data
   File and record formats
   File Format tab File Port
   File Options tab
   Forms tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Information on document status
   JES2 commands for RJE
   Job header general section
   Job header schedule section
   Job header security section
   Job trailer accounting section
   Job trailer general section
   Learning about JCL (SYSIN) jobs
   Learning about the Retain Window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   LPD header fields
   Managing document rights
   Managing spool documents
   Overlay Options dialog box
   Overview Header fields
   Redirecting print files (SYSOUT) to the host
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Sending files (JCL SYSIN) to the NJE host
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the Viewer
   Working with inline Xerox resources
   Working with override tables
   Working with retained documents
   Working with the INI file
Data Sets The
   Learning about the Retain Window
   Learning about the Spool Window
   Using BARR/TRAN
Data Source
   Common questions for TCP/IP
   Device Properties dialog box
   Spool file processing
DATA South
Data Stream
   Common questions for SPOOL
   Configuring the spool to print to a Xerox printer
   Data set header output processing section
   File Format tab IP Port
   Getting started with BARR/PRINT to EPS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Getting started with TOOLS
   Overview BARR/PRINT to EPS
   Overview TCP/IP
   Printing to a Xerox printer
   Remote definition
   Splitting jobs
   Troubleshooting printers
   Using an override table to auto-assign header fields
   Using the Data Conversion Utility
   Writing to a TCP/IP socket
   Xerox file formats
Data Type
   Advanced Printer Options dialog box
   Common questions for Print Utility
   Common questions for TRANSFORMS
   Compressing data
   Data set header internal custom section
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Manually configuring readers
   Passing data to the printer without conversion
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Routing to another BHCS
   Sending jobs to the host
   Splitting jobs
   Spool file processing
   Troubleshooting printers
   Troubleshooting TCP/IP
   Writing to a TCP/IP socket
   Writing to disk
Data.bnj
DATA/ASAFILE
DATA/FILE1/1
DATA/FILE1/A
DATA/FILE1/V
DATA/FILE2/B
DATA/FILE3/Tn
Data_set_name
Data_set_name,DCB
Data_set_name,DISP
Dataproducts,Data Printer
Dataset
    selecting
Date
   BARR information fields
   Barr Retain information fields
   Common questions for printers
   Common questions for Spool Window
   Device Control tab
   Enabling and disabling the retain feature
   Information on document status
   Job header general section
   Job header POWER section
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   LPD header fields
   Managing spool documents
   Overview Operator Console
   Overview Retain Window
   Remote definition
   Retain Start/End Date & Time dialog box
   Schedule Print Date and Time dialog box
   Spool and Retain tab
   Supported RFC1179 features
   Troubleshooting Retain Window
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the RJE Console
   Working with retained documents
   Xerox file formats
Date Time
   Common questions for printers
   Common questions for Spool Window
   Remote definition
DATE/TIME
   Configuring the NJE auto-start feature using NetView (optional)
   Supported RFC1179 features
DAVFU
DB
   Interpreting RJE diagnostic data
   Transform Configuration dialog box
   Using BARR/TRAN
DBA
DBS
DBSA
DC
DCB
   Common questions for BARR/NJE
   Common questions: Using BARR/RJE
   Data set header general section
   Learning about JCL (SYSIN) jobs
   Troubleshooting: Using BARR/RJE
   Using BARR/TRAN
DCD
DCO
   Chain Selection dialog box
   Data set header internal custom section
   Format tab
   Using the Data Conversion Utility
    create
    Current
    records
    rest
    select
DCO Interfaces
DCO reads
DCO_BOOL_3800_PRINTER
DCO_BOOL_3800_TRC_ENABLED
DCO_BOOL_ASCII_V_FORMAT
DCO_BOOL_BINARY_DATA
DCO_BOOL_COMPACT
DCO_BOOL_COMPRESS
DCO_BOOL_CONDITIONAL_END_PB
DCO_BOOL_CONDITIONAL_START_PB
DCO_BOOL_DATA_IS_HEX
DCO_BOOL_DECOMPRESS
DCO_BOOL_DECRYPT
DCO_BOOL_ENCRYPT
DCO_BOOL_FCBLOAD
DCO_BOOL_MARK_INSERTED_RECS
DCO_BOOL_MCC_IN_DATA
DCO_BOOL_OPTIMIZE
DCO_BOOL_OVERRIDE_FCB
DCO_BOOL_PAGE_DIRTY_FLAG
DCO_BOOL_PAGINATE
DCO_BOOL_POWER_HOST
DCO_BOOL_PROGRAMHANDLES
DCO_BOOL_REMOVE_RECORDn
DCO_BOOL_REPLACEBLANKFONTINDEX
DCO_BOOL_SEARCH_STRING_MODEn
DCO_BOOL_SECOND_BYTE_DELIMITER
DCO_BOOL_STRIP_LOAD_FCB
DCO_BOOL_STRIP_NOOP
DCO_BOOL_STRIP_S370_CC
DCO_BOOL_SWITCH_CODE_PAGE
DCO_BOOL_TRANSPARENCY
DCO_BOOL_VALID_FILE80_DATA
DCO_BOOL_VBMBLOCKLEN
DCO_FILE80_FILENAME
DCO_INT_CC_TYPE_FIXED
DCO_INT_TERM_CODEPAGE
DCO_MAX_REC_LENGTH
DCO_STRING_CCTYPE
DCO_STRING_COMPACT_TABLE
DCO_STRING_CONFIG_FILE
DCO_STRING_DJDEREPLACE
   Using the Data Conversion Utility
   Working with inline Xerox resources
DCO_STRING_DJDESEARCH
   Using the Data Conversion Utility
   Working with inline Xerox resources
DCO_STRING_FCB
DCO_STRING_FILE80_FILENAME
DCO_STRING_FILE80_RECFM
DCO_STRING_FIXREC_DELIM
DCO_STRING_IDEN
   Using the Data Conversion Utility
   Working with inline Xerox resources
DCO_STRING_INPUT_FORMAT
DCO_STRING_KEY_NAME
DCO_STRING_OUTPUT_FORMAT
DCO_STRING_PADRECORD
DCO_STRING_PADSKIP1
DCO_STRING_PAGE_RANGE
DCO_STRING_PROGRAMFOLDER
DCO_STRING_PROGRAMPARAMETERS
DCO_STRING_PROGRAMPATH
DCO_STRING_RECORD_TERMINATOR
DCO_STRING_REPLACEn
DCO_STRING_RETURN_LAST_FCB
DCO_STRING_RSTACK
   Using the Data Conversion Utility
   Working with inline Xerox resources
DCO_STRING_SEARCHn
DCO_STRING_TRUNCATE
DCO_ULONG_COMPRESS_LEVEL
DCO_ULONG_CP_CURRENT
DCO_ULONG_CPIN
DCO_ULONG_CPOUT
DCO_ULONG_FIXEDREC
DCO_ULONG_FIXREC_LENGTH
DCO_ULONG_LRECL
DCO_ULONG_MAX_PRINT_POSITION
DCO_ULONG_N_RECORDS
DCO_ULONG_SEND_FCB
DCO_ULONG_SPACE_CHAR
DCO_ULONG_STRIPCHAR
DCO_ULONG_TAB_CHAR
DCO_ULONG_TAB_SIZE
DCO_ULONG_V_RECORDS_CHAR
DCO_UNICODE_DATA
DCOM
   Managing services
   Troubleshooting: Managing connections
DCOM Configuration Properties
Dcomcnfg
   Managing services
   Troubleshooting: Managing connections
Dd
   BARR information fields
   Barr Retain information fields
   JES3 commands for RJE
   Learning about JCL (SYSIN) jobs
    following
    immediately following
DD JCL
Ddd
   JES2 commands for RJE
   POWER commands for NJE
DDE
Ddn
DDNAME
   Data set header general section
   JES3 commands for RJE
    NJEWKnn
Decimal
   Assigning document attribute values
   Barr SNA Configuration dialog box
   Common questions for Make FCB
   Common questions for Print Utility
   Common questions: Using RJE
   Configuring NJE for BARR SNA
   Data set header 3800 section
   Format tab
   Job header POWER section
   Managing document rights
   Rule Actions dialog box
   Rule Conditions dialog box
   SNA Configuration dialog box
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using BARR/TRAN
   Using the FCB utility
   Working with override tables
   Working with TCP/IP sockets
Decompacted
Decrypt2BinaryDCO
Default
   Adding files to the spool
   Advanced Node Settings dialog box
   Advanced Printer Options dialog box
   Automatic Spooling tab
   Banner Options dialog box
   Barr SNA Configuration dialog box
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Capturing diagnostics
   Channel Input Port dialog box
   Commands tab
   Common questions for BARR/PRINT TCP/IP
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for NJE
   Common questions for printers
   Common questions for Services
   Common questions for SPOOL
   Common questions for TRANSFORMS
   Common questions: Using RJE
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Compressing data
   Configuring JES2 for NJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Connecting to the host
   Connection Control tab
   Content tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Data set header POWER section
   Data set header RCCS section
   Data set header RSCS section
   Data set header security section
   Device Control tab
   Device Properties dialog box
   Disk Settings dialog box
   Display Properties tab
   Enabling and disabling the retain feature
   Encrypting data
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   File Properties dialog box
   Format Columns dialog box
   Format tab
   Forms tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Headers From Data Configuration dialog box
   HPR/IP Connection Configuration dialog box
   Identifying Barr components
   Import Override Table Files dialog box
   Interpreting RJE diagnostic data
   IP Configuration tab
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Job header accounting section
   Job header general section
   Job header JES2 section
   Job header POWER section
   Job header schedule section
   Job header security section
   Job tab
   Job trailer accounting section
   Job trailer general section
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the HTML help window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Locating diagnostic files
   Logmode table entry
   LPD header fields
   LPD tab
   Managing document rights
   Managing spool documents
   Manual Spooling tab
   Manually configuring readers
   Modifying the default spool folders
   NJE Configuration dialog box
   Options dialog box Operator Console
   Overlay Options dialog box
   Override Table tab
   Overview Make FCB
   Overview services
   Overview TOOLS
   Port Properties dialog box
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Remote definition
   Resource Folders tab
   Retain Start/End Date & Time dialog box
   RJE Description tab
   Routing tab
   Routing to another BARR/SPOOL
   Rules Editor dialog box
   Select Code Pages dialog box
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Sending jobs to the host
   SNA Configuration dialog box
   Socket tab
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Tips for routing spool documents
   Trace tab HPR/IP
   Transform Configuration dialog box
   Troubleshooting BARR/PRINT TCP/IP
   Troubleshooting Configuration Utility
   Troubleshooting Make FCB
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting RJE connections
   Troubleshooting Services
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting: Using BARR/RJE
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Make Banner utility
   Using the PRT utility
   Using the RJE Console
   Using the User Rights Configuration utility
   Using the Viewer
   Welcome
   What's new in this release
   Working with LPD print queues
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with Print Utility control files
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Working with the INI file
   Writing to a TCP/IP socket
   Writing to disk
    66
    Job's
    Printable lines/page
    select
    TRANS
Default .bsp
Default BATCH
Default chain
Default Code Page
   Advanced Printer Options dialog box
   Learning about the Viewer window
   Select Code Pages dialog box
Default ending
Default Printer
   Data set header 3800 section
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Troubleshooting Configuration Utility
   Working with page layouts
Default RJE3790B
Default SETPRT
Default spool folders
    Modifying
Default Sys1.Imagelib
Default UCS
DEFAULT,UCS
Default.brj
Default.bsp
   Customizing the spool view
   Modules
DEFAULT.INI
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Transform Configuration dialog box
   Working with the INI file
DEFAULT.INI file
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
   Transform Configuration dialog box
   Working with the INI file
    create
       Getting started with BARR/TOOLS
       Getting started with BARR/TRANSFORM (ADEPT Suite)
    save
    use
       Getting started with BARR/TOOLS
       Getting started with BARR/TRANSFORM (ADEPT Suite)
       Transform Configuration dialog box
Default/Sys1.Imagelib
Default/sys1.imagelib”
Define
   Advanced Printer Options dialog box
   Banner Options dialog box
   Barr SNA Configuration dialog box
   BARR$SN1 job
   Choosing the correct account type
   Commands tab
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for NJE
   Common questions for printers
   Common questions for TCP/IP
   Common questions: Configuring RJE
   Common questions: Using RJE
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring NJE for BARR SNA
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring RJE optional settings
   Configuring TCP/IP and VTAM for HPR/IP
   Configuring the host for Barr SNA or SNA
   Configuring the spool to print to a Xerox printer
   Connecting to the host
   Content tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header general section
   Data set header internal custom section
   Data set header security section
   Define Page Layout dialog box
   Determining the communication paths
   Device Control tab
   Device Properties dialog box
   Display Properties tab
   Downloading host resources using NJE
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   File Properties dialog box
   Forms command strings
   Forms tab
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with NJE
   Getting started with printers
   Getting started with SPOOL
   Getting started with TRANSFORM (ADEPT Suite)
   Headers From Data Configuration dialog box
   Import Override Table Files dialog box
   Interpreting RJE diagnostic data
   Job header general section
   Job header security section
   Job tab
   Learning about JCL (SYSIN) jobs
   Learning about the Make FCB window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Locating diagnostic files
   Logmode table entry
   LPD header fields
   LPD tab
   Manually configuring readers
   Modifying a printer's device driver settings
   Modifying a printer's port settings
   Modifying the default spool folders
   Mount Forms dialog box
   Options dialog box Operator Console
   Options tab
   Overlay Options dialog box
   Override Table tab
   Overview BHCS
   Overview NJE
   Overview printers
   Overview RJE
   Page Layout tab
   Passing data to the printer without conversion
   Port Properties dialog box
   Printer Groups tab
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Redirecting print files (SYSOUT) to the host
   Remote definition
   Resource Folders tab
   RJE concepts
   RJE Description tab
   Routing tab
   Routing to another BHCS
   Rule Actions dialog box
   Rules Editor dialog box
   Searching the Help
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Set Destination Node dialog box
   Socket tab
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Spool output ports and device drivers
   Spool Printers tab
   Spooling Properties dialog box
   Transform Configuration dialog box
   Troubleshooting BARR/NJE
   Troubleshooting BARR/PRINT to EPS
   Troubleshooting Configuring RJE
   Troubleshooting printers
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Troubleshooting TCP/IP
   Troubleshooting: Using BARR/RJE
   Using an override table to auto-assign header fields
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Help
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the LPRM command line approach
   Using the NJE Console
   Using the Operator Console
   Using the RJE Console
   Using the Viewer
   Working with BARR/RJE connections
   Working with LPD print queues
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with spool printers
   Working with the INI file
    120
    3800
    Add
    BARR/NJE
       Configuring JES2 for NJE
       Configuring JES3 for NJE
    BARR/NJE CTC
    BARR/NJE SNA
    BARR/RJE
       Configuring BARR/RJE for HPR/IP (Enterprise Extender)
       Configuring BARR/RJE for MS/LUA
       Working with BARR/RJE connections
    characteristics
    CTC NJE
    documents according
    FCBs
    JES2
    JES3
    NJE
    PU
    RJE
       Configuring JES2 for RJE
       Configuring JES3 for RJE
       Configuring POWER for RJE
    VIPA
    VTAM
       Configuring JES2 for RJE
       Configuring JES3 for RJE
       Configuring POWER for RJE
       RJE Description tab
    VTAM program
    Windows
       Getting started with printers
       Modifying a printer's device driver settings
       Modifying a printer's port settings
       Printing to a TCP/IP print queue
       Printing to a TCP/IP printer
       Printing to a Windows printer
       Printing to a Xerox printer
       Sending jobs to the host
       Spool output ports and device drivers
Define Barr
Define Page Layout dialog box
Defined routing tables
DELETE
Delete Deletes
   Automatic Spooling tab
   Learning about the Retain Window
   Learning about the Spool Window
   Spooling Properties dialog box
Delete Sets
Delete After
   Common questions for Retain Window
   Data set header POWER section
   Enabling and disabling the retain feature
   Learning about the Retain Window
   Learning about the Spool Window
   Managing spool documents
   Spool and Retain tab
   Working with retained documents
Delete After Printing
   Common questions for Retain Window
   Data set header POWER section
   Enabling and disabling the retain feature
   Learning about the Retain Window
   Learning about the Spool Window
   Managing spool documents
   Spool and Retain tab
   Working with retained documents
    Use
Delete button
   Manual Spooling tab
   Working with retained documents
    select
Delete Channel Stop
   Learning about the Make FCB window
   Using the FCB utility
    menu bar
Delete Index Files
   Learning about the Retain Window
   Learning about the Spool Window
   Troubleshooting Viewer
Delete Stop
   Learning about the Make FCB window
   Using the FCB utility
Delete Stop button
    toolbar
Delete toolbar button
Deleted during
Deletes
   Adding files to the spool
   Automatic Spooling tab
   Available user rights
   BARR information fields
   Barr Retain information fields
   Commands tab
   Common questions for NJE
   Common questions for Operator Console
   Common questions for Print Utility
   Common questions for printers
   Common questions for Retain Window
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Communications Profile tab
   Configuring RJE optional settings
   Connection Configuration dialog box
   Data set header internal custom section
   Data set header POWER section
   Device Properties dialog box
   Disk Settings dialog box
   Enabling and disabling the retain feature
   File Options tab
   File Properties dialog box
   Getting started with Retain Window
   Getting started with SPOOL
   Information on document status
   JES2 commands for RJE
   Learning about the Make FCB window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   LPD tab
   Managing document rights
   Managing spool documents
   Manual Spooling tab
   Manually configuring readers
   Options tab
   Output statements
   Overview Retain Window
   Overview Spool Window
   Port Properties dialog box
   POWER commands for NJE
   Removing the Barr software
   Routing tab
   Rules Editor dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Socket tab
   Spool and Retain tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Troubleshooting BARR/SPOOL
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Troubleshooting Viewer
   Using BARR job for the NJE auto-start configuration
   Using BARR/TRAN
   Using the Data Conversion Utility
   Using the FCB utility
   Using the LPRM command line approach
   Using the Make Banner utility
   Using the Operator Console
   Using the User Rights Configuration utility
   Working with BARR/RJE connections
   Working with inline Xerox resources
   Working with LPD print queues
   Working with NJE connections
   Working with NJE profiles
   Working with NJE routing tables
   Working with override tables
   Working with page layouts
   Working with Print Utility control files
   Working with printer groups
   Working with retained documents
   Working with spool printers
    Barr
    BARR/RJE
    Barr?inf
    menu bar
    No
    test.txt file
    Yes
       Using the User Rights Configuration utility
       Working with override tables
       Working with page layouts
       Working with printer groups
       Working with RJE connections
DelExtractedAfpRes
Delimited
   Common questions for NJE
   Common questions: Using RJE
   Format tab
   Using the Data Conversion Utility
   Using the RJE Console
Delimiter
   File Format tab File Port
   File Format tab IP Port
   Format tab
   Parsing a long header field into separate fields
   Sending JCL files with an embedded command
   Using BARR/TRAN
   Using the Data Conversion Utility
    specify
       File Format tab File Port
       File Format tab IP Port
Delimiter – The
Delimiter Specify
Delimiter, the ending
Depending
   Commands tab
   Configuring BARR/RJE optional settings
   Device Control tab
    RJE
    Use FCBLOAD
DEPT
Descending
Describes
   Choosing the correct account type
   Communication link parameters
   Configuring JES2 for NJE
   Connecting to the host
   Data set header general section
   Data set header output processing section
   File Properties dialog box
   Interpreting Barr Messages
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   Learning about JCL (SYSIN) jobs
   Learning about the HTML help window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Logmode table entry
   Overview Configuration Utility
   Remote definition
   RJE concepts
   Routing tab
   Sending JCL files with an embedded command
   Spool file processing
   Supported RFC1179 features
   Tell me about printers
   Troubleshooting receiving RJE jobs from the host
   Using BARR/TRAN
   Using the Make Banner utility
   Using the Operator Console to gather diagnostics
   Working with the INI file
   Xerox file formats
    RJE
    SNA
    VTAM
Description
   Adding files to the spool
   Automatic Spooling tab
   Available user rights
   BARR information fields
   Barr Retain information fields
   Capturing diagnostics
   Choosing ports and device drivers
   Commands tab
   Common questions for NJE
   Common questions for Print Utility
   Common questions for TCP/IP
   Common questions: Using RJE
   Communication link parameters
   Configuring BARR/RJE optional settings
   Configuring JES2 for NJE
   Configuring JES2 for RJE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Configuring POWER for NJE
   Configuring POWER for RJE
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring the NJE auto-start feature (optional)
   Configuring VTAM for NJE
   Configuring VTAM for RJE
   Customizing the retain view
   Customizing the spool view
   Data set header 3800 section
   Data set header internal custom section
   File and record formats
   File Format tab File Port
   File Format tab IP Port
   File Properties dialog box
   Format tab
   Forms command strings
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Information on document status
   Information on printer status
   Insert Field dialog box
   Interpreting Barr Messages
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Learning about JCL (SYSIN) jobs
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the HTML help window
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Locating diagnostic files
   Logmode table entry
   LPD header fields
   Managing spool documents
   Manually sending the diagnostic file
   Operator and Advanced rights
   Options dialog box Operator Console
   Overview BHCS
   Overview SNA connectivity for NJE
   Parsing a long header field into separate fields
   Port Properties dialog box
   POWER commands for NJE
   POWER commands for RJE
   Print Preview toolbar
   Remote definition
   Rule Actions dialog box
   Rule Conditions dialog box
   Searching the Help
   Select Header Fields dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Spooling Properties dialog box
   Supported RFC1179 features
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting RJE connections
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Using BARR/TRAN
   Using LPR switches
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the NJE Console
   Using the Operator Console
   Using the RJE Console
   Using the Viewer
   Working with inline Xerox resources
   Working with LPD print queues
   Working with override tables
   Working with TCP/IP sockets
   Working with the accounting system
   Working with the INI file
   Xerox file formats
    Use
Description Description
   File Properties dialog box
   Port Properties dialog box
   Spooling Properties dialog box
Deselect All
   Printer Groups tab
   Using the Add Sort Criteria Wizard
   Working with printer groups
Deselect All button
DeskJet
   Format tab
   Information on document status
   Learning about the Spool Window
   Overview BARR/PRINT TCP/IP
   Spool file processing
   Troubleshooting Configuration Utility
DEST
   Common questions for BARR/NJE
   Common questions for BARR/PRINT TCP/IP
   Common questions: Using BARR/RJE
   Configuring BARR/NJE for BARR SNA
   Configuring the spool to print to a Xerox printer
   Data set header general section
   Getting started with BARR/PRINT to EPS
   JES2 commands for NJE
   JES2 commands for RJE
   Job header general section
   Learning about JCL (SYSIN) jobs
   POWER commands for RJE
   Redirecting print files (SYSOUT) to the host
   Remote definition
   Sending files (JCL SYSIN) to the NJE host
   Tips for routing spool documents
   Troubleshooting BARR/PRINT to EPS
   Using BARR job for the NJE auto-start configuration
    adding
       Configuring the spool to print to a Xerox printer
       Getting started with BARR/PRINT to EPS
    clicking
    populate
    select
Dest Device
Destination
   Advanced Printer Options dialog box
   Choosing files to include in the diagnostics
   Choosing ports and device drivers
   Common questions for BARR/PRINT TCP/IP
   Common questions for Print Utility
   Common questions for the Configuration Utility
   Common questions: Using RJE
   Configuring NJE for BARR SNA
   Configuring the spool to print to a Xerox printer
   Data set header general section
   Data set header internal custom section
   Data set header LPD/user custom section
   Data set header output processing section
   Determining the communication paths
   File Options tab
   Getting started with BARR/PRINT to EPS
   Getting started with SPOOL
   Getting started with TRANSFORM (ADEPT Suite)
   Interpreting RJE diagnostic data
   IP Configuration tab
   JES2 commands for NJE
   JES2 commands for RJE
   Job header general section
   Learning about JCL (SYSIN) jobs
   Learning about the Make Banner window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the Spool Window
   LPD header fields
   Managing spool documents
   Managing spool printers
   Manually configuring readers
   Modules
   Overview BHCS
   Overview printers
   Overview Retain Window
   Overview SPOOL
   Overview TCP/IP
   POWER commands for RJE
   Printing to a Xerox printer
   Product features
   Receiving RJE jobs from the host
   RJE concepts
   Routing tab
   Rule Actions dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Set Destination Node dialog box
   Spool file processing
   Spool output ports and device drivers
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting receiving RJE jobs from the host
   Troubleshooting using RJE
   Using an override table to auto-assign header fields
   Using BARR/TRAN
   Using the NJE Console
   Welcome
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with retained documents
   Working with spool printers
   Writing to a TCP/IP socket
Destination-ready
   Advanced Printer Options dialog box
   Passing data to the printer without conversion
   Spool file processing
   Troubleshooting Configuration Utility
   Working with spool printers
Destination Device
   Advanced Printer Options dialog box
   Configuring the spool to print to a Xerox printer
   Data set header general section
   Getting started with BARR/PRINT to EPS
   LPD header fields
   Modules
   Overview BHCS
   Printing to a Xerox printer
   Sending files (JCL SYSIN) to the RJE host
   Spool file processing
   Spool output ports and device drivers
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Using an override table to auto-assign header fields
   Working with page layouts
   Writing to a TCP/IP socket
Destination node
   Data set header general section
   Data set header internal custom section
   Determining the communication paths
   Job header general section
   Learning about the NJE Console window
   Routing tab
   Sending files (JCL SYSIN) to the NJE host
   Set Destination Node dialog box
   Spool file processing
   Troubleshooting BARR/NJE
   Using the NJE Console
    enter
Destination routing
   Rule Actions dialog box
   Working with override tables
    override
DESTINATION SELECTION
Destination/route
Destnode
Destroyed
Detailed message
Detailed message regarding
Determine
   Accounting tab
   Advanced Printer Options dialog box
   Choosing files to include in the diagnostics
   Commands tab
   Common questions for BARR/PRINT to EPS
   Common questions for Print Utility
   Common questions for printers
   Common questions for TCP/IP
   Common questions for TRANSFORMS
   Common questions: Using RJE
   Communication link parameters
   Data set header 3800 section
   Data set header general section
   Data set header output processing section
   Data set header RCCS section
   Define Page Layout dialog box
   Determining the communication paths
   Device Control tab
   Display Properties tab
   Enabling the 'Print directly to the printer' setting
   Format tab
   Getting started with NJE
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   JES2 commands for RJE
   Job header accounting section
   Job header general section
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Lines-per-form and lines-per-inch settings
   Logmode table entry
   Manually sending the diagnostic file
   Output statements
   Overview BARR/RJE
   Overview services
   Overview Technical Support
   Receiving RJE jobs from the host
   Remote definition
   RJE concepts
   RJE Description tab
   Rules Editor dialog box
   Select Connection dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Set Destination Node dialog box
   Spool file processing
   Troubleshooting NJE
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using BARR/TRAN
   Using the Add Sort Criteria Wizard
   Using the Data Conversion Utility
   Using the NJE Console
   Using the RJE Diagnostics utility
   Working with overlays
   Working with override tables
   Working with spool printers
   Working with the accounting system
    BARR/NJE
       Learning about the NJE Console window
       Set Destination Node dialog box
    FCB
    RJE
Determines pacing
DEV
   JES2 commands for RJE
   POWER commands for RJE
Dev,K
DEVFCB
DEVICE
   Common questions: Using RJE
   Configuring TCP/IP and VTAM for HPR/IP
   Data set header LPD/user custom section
   Device Properties dialog box
   Lines-per-form and lines-per-inch settings
   Modifying a printer's device driver settings
   Printing to a Windows printer
   Remote definition
   Troubleshooting BARR/NJE
   Troubleshooting printers
    actions
       Data set header LPD/user custom section
       Lines-per-form and lines-per-inch settings
Device-independence
Device-independent ditroff
Device-independent troff
Device Control
DEVICE IUTSAMEH MPCPTP
Device Properties dialog
   Common questions: Using BARR/RJE
   Device Properties dialog box
Device Settings
   Lines-per-form and lines-per-inch settings
   Modifying a printer's device driver settings
   Printing to a Windows printer
   Troubleshooting printers
    select
       Modifying a printer's device driver settings
       Printing to a Windows printer
DEVICE VIPA01 VIRTUAL
DEVICE,DTYPE
   Configuring JES3 for NJE
   Configuring JES3 for RJE
   Remote definition
Device,options
DEVTYPE
   Configuring JES2 for RJE
   Remote definition
   RJE Description tab
DF
   Commands tab
   Troubleshooting: Receiving jobs from the host
   Using the RJE Console
DfA”
DFAULT
DFAULT.JSL
DfB
    change
DfC
DH
   File and record formats
   Overview Header fields
DH Data
Diagnostics
   Available user rights
   Capturing a TCP/IP socket trace
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Capturing an LPD trace
   Capturing diagnostics
   Choosing files to include in the diagnostics
   Connecting to the host
   Connection Control tab
   Getting help
   Interpreting RJE diagnostic data
   Learning about the Diagnostics Utility window
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Locating diagnostic files
   LPD tab
   Managing spool documents
   Manually sending the diagnostic file
   Opening and closing the Diagnostics Utility
   Opening and closing the RJE utilities
   Operator and Advanced rights
   Options dialog box Operator Console
   Overview Diagnostics Utility
   Overview RJE
   Overview services
   Overview Technical Support
   Select Connection dialog box
   Socket tab
   Troubleshooting BARR/SPOOL
   Using the NJE Console
   Using the Operator Console to gather diagnostics
   Using the RJE Console
   Using the RJE Diagnostics utility
   Working with retained documents
    Add
       Learning about the Retain Window
       Learning about the Spool Window
       Managing spool documents
       Working with retained documents
    running
    Select Add
Diagnostics Opens
    BARR/SPOOL
Diagnostics Utility
   Capturing diagnostics
   Choosing files to include in the diagnostics
   Connecting to the host
   Interpreting RJE diagnostic data
   Learning about the Diagnostics Utility window
   Learning about the Retain Window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Locating diagnostic files
   Managing spool documents
   Manually sending the diagnostic file
   Opening and closing the Diagnostics Utility
   Overview Diagnostics Utility
   Overview RJE
   Select Connection dialog box
   Troubleshooting SPOOL
   Using the RJE Diagnostics utility
   Working with retained documents
    Restarting
    run
    Use
Diagnostics utility includes
DiagStatus.log
DIAL
Dial-Up
   Communication Link tab
   Interpreting RJE diagnostic data
   Learning about the RJE Diagnostics window
   RJE concepts
Dialing
Dib
Dib AND
Different Barr Node
   Common questions for BARR/NJE
   Working with NJE routing tables
    Assign
Differs
   Configuring BARR/NJE for BARR SNA
   Working with the INI file
    JES2
Digital Equipment Corporation
Direction
   Managing spool documents
   Using the Add Sort Criteria Wizard
   Using the Operator Console
   Using the RJE Console
   Using the Viewer
   Working with retained documents
Directory
   Advanced Printer Options dialog box
   Common questions for Print Utility
   Common questions for Services
   Common questions for SPOOL
   Common questions for TRANSFORMS
   Connecting to the host
   Device Control tab
   Disk Settings dialog box
   Enabling and disabling the retain feature
   Encrypting data
   Format tab
   Import Override Table Files dialog box
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the Spool Window
   Managing spool documents
   Override Table tab
   Printing to a Xerox printer
   Product features
   Resource Folders tab
   Routing tab
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending JCL files with an embedded command
   Spooling Properties dialog box
   Supported RFC1179 features
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Print Utility
   Troubleshooting printers
   Troubleshooting SPOOL
   Using an override table to auto-assign header fields
   Using BARR/TRAN
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the PRT utility
   Using the User Rights Configuration utility
   Working with NJE routing tables
   Working with overlays
   Working with override tables
   Working with retained documents
   Working with RJE connections
Disable Sets
Disable Stops
   Automatic Spooling tab
   Learning about the Spool Window
Disable All
   Learning about the User Rights window
   Options dialog box Operator Console
   Using the Operator Console
   Using the Operator Console to gather diagnostics
Disable All button
Disable the Print
Disable the writing
Disabled
   Accounting tab
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Automatic Spooling tab
   Available user rights
   Commands tab
   Common questions for Print Utility
   Common questions for Spool Window
   Common questions: Using RJE
   Communication Link tab
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring BARR/RJE optional settings
   Connecting to the host
   Data set header internal custom section
   Device Control tab
   Device Properties dialog box
   Enabling and disabling the retain feature
   File Format tab File Port
   File Format tab IP Port
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Information on printer status
   Learning about the Retain Window
   Learning about the RJE Console window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Logmode table entry
   Managing services
   Managing spool printers
   Manually configuring readers
   Options dialog box Operator Console
   Passing data to the printer without conversion
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Remote definition
   Routing to another BARR/SPOOL
   Sending jobs to the host
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Troubleshooting BARR/NJE
   Troubleshooting printers
   Troubleshooting Services
   Troubleshooting TCP/IP
   Troubleshooting using RJE
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the Viewer
   Working with printer initialization files
   Working with spool printers
   Writing to a TCP/IP socket
   Writing to disk
    change
       Common questions for Spool Window
       Learning about the Spool Window
    FCBLOAD
    menu bar
    Print
    Printing
       Information on printer status
       Learning about the Spool Window
    retain feature
    Selecting
    set
       Advanced Printer Options dialog box
       Managing spool printers
    state
    states
Disabled – Disables
Disabled The
   Information on printer status
   Learning about the Spool Window
Disables the accounting
Disables use
Disabling the
   Accounting tab
   Advanced Printer Options dialog box
   Automatic Spooling tab
   Available user rights
   Common questions: Using RJE
   Connecting to the host
   Device Control tab
   Enabling and disabling the retain feature
   Information on printer status
   Learning about the Retain Window
   Learning about the Spool Window
   Remote definition
   Spool file processing
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting TCP/IP
Discards
   Common questions for SPOOL
   Content tab
   Device Control tab
   Device Properties dialog box
   File Format tab File Port
   Format tab
   Learning about JCL (SYSIN) jobs
   Options tab
   Supported RFC1179 features
   Troubleshooting NJE
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Using the Data Conversion Utility
    SCS
DISCINTV
DISCNT
Disconnect
   Common questions: Configuring RJE
   Common questions: Using BARR/RJE
   Communication link parameters
   Configuring RJE optional settings
   Connecting to the host
   Connection Control tab
   Learning about the NJE Console window
   Learning about the RJE Console window
   Learning about the Spool Window
   Opening and closing the BARR/RJE utility
   Remote definition
   Troubleshooting: Managing connections
    changes
    PU
    RJE
       Connecting to the host
       Learning about the RJE Console window
    select
Disconnect Disconnects
Disconnect Ends
Disconnect RJE
   Connecting to the host
   Learning about the RJE Console window
Disconnected There
Disk
   Available user rights
   BARR information fields
   Barr Retain information fields
   Choosing ports and device drivers
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for SPOOL
   Compressing data
   Disk Settings dialog box
   Enabling the 'Print directly to the printer' setting
   File Format tab File Port
   File Options tab
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Interpreting Barr Messages
   JES2 commands for RJE
   Job header POWER section
   Learning about JCL (SYSIN) jobs
   Learning about the NJE Console window
   Learning about the Retain Window
   Learning about the Spool Window
   Locating diagnostic files
   Manually configuring readers
   Manually sending the diagnostic file
   Options dialog box Operator Console
   Overview Operator Console
   Overview printers
   Overview Retain Window
   Overview services
   Overview SNA connectivity for NJE
   Passing data to the printer without conversion
   Spool and Retain tab
   Troubleshooting printers
   Using BARR/TRAN
   Welcome
   What's new in this release
   Working with printer initialization files
   Working with spool printers
   Working with the accounting system
   Writing to disk
   Xerox file formats
    Writing
Disk Settings
   Available user rights
   Disk Settings dialog box
   Learning about the Spool Window
   Manually configuring readers
   Passing data to the printer without conversion
   Troubleshooting printers
   Working with printer initialization files
   Working with spool printers
    clicking
Disk Settings button
Disk Settings dialog
Disk Usage
   Overview services
   Welcome
   What's new in this release
DISP
   Output statements
   Using BARR/TRAN
    Use
Display – Displays
display asking
   Capturing an LPD trace
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Managing spool printers
   Using the User Rights Configuration utility
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with RJE connections
Display asking if
   Capturing an LPD trace
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Managing spool printers
   Working with RJE connections
Display Global Command
Display Host Command
Display Properties tab
Display screens
   Data set header LPD/user custom section
   Lines-per-form and lines-per-inch settings
    management
       Data set header LPD/user custom section
       Lines-per-form and lines-per-inch settings
Display warning messages
Displays
   Accounting tab
   Adding files to the spool
   Advanced Printer Options dialog box
   Assigning document attribute values
   Automatic Spooling tab
   BARR information fields
   Barr Retain information fields
   Barr SNA Configuration dialog box
   Capturing an HPR/IP trace for NJE
   Capturing an HPR/IP trace for RJE
   Capturing an LPD trace
   Capturing diagnostics
   Channel Input Port dialog box
   Commands tab
   Common questions for BARR/SPOOL
   Common questions for Make FCB
   Common questions for NJE
   Common questions for Operator Console
   Common questions for Print Utility
   Common questions for Services
   Common questions for Spool Window
   Common questions for TCP/IP
   Common questions for the Configuration Utility
   Common questions for TRANSFORMS
   Common questions: Configuring RJE
   Common questions: Managing connections
   Common questions: Using BARR/RJE
   Communication link parameters
   Communication Link tab
   Communications Profile tab
   Compressing data
   Configure Multiple Start Times dialog box
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
   Configuring RJE for MS/LUA
   Configuring RJE optional settings
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring the spool to print to a Xerox printer
   Connecting to the host
   Connection Configuration dialog box
   Connection Control tab
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   Data set header LPD/user custom section
   Define Page Layout dialog box
   Device Control tab
   Device Properties dialog box
   Disk Settings dialog box
   Display Properties tab
   Enabling and disabling the retain feature
   Enabling the 'Print directly to the printer' setting
   Encrypting data
   File Options tab
   File Properties dialog box
   Format Columns dialog box
   Forms command strings
   Forms tab
   Getting started using a Barr SNA connection
   Getting started using an SNA connection
   Getting started with SPOOL
   Getting started with TOOLS
   Getting started with TRANSFORM (ADEPT Suite)
   Identifying Barr components
   Import Override Table Files dialog box
   Information on document status
   Information on printer status
   Insert Field dialog box
   Interpreting Barr Messages
   Interpreting RJE diagnostic data
   JES2 commands for NJE
   JES2 commands for RJE
   JES3 commands for NJE
   JES3 commands for RJE
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the HTML help window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Configuration Utility window
   Learning about the RJE Console window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Link tab HPR/IP
   Locating diagnostic files
   Logmode table entry
   LPD tab
   Managing document rights
   Managing services
   Managing spool documents
   Managing spool printers
   Manual Spooling tab
   Manually configuring readers
   Mount Forms dialog box
   NJE Configuration dialog box
   Notes tab
   Opening and closing the RJE utilities
   Opening and closing the Viewer utility
   Operator commands for NJE
   Operator commands for RJE
   Options dialog box Operator Console
   Options tab
   Output statements
   Override Table tab
   Overview BHCS
   Overview NJE
   Overview Operator Console
   Overview Retain Window
   Overview RJE
   Overview services
   Overview Spool Window
   Overview Viewer
   Page Layout tab
   Passing data to the printer without conversion
   Port Properties dialog box
   POWER commands for NJE
   POWER commands for RJE
   Preferences tab
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Printing to a Xerox printer
   Product features
   Redirecting print files (SYSOUT) to the host
   Remote definition
   Resource Folders tab
   Retain Start/End Date & Time dialog box
   RJE Description tab
   Routing tab
   Routing to another BHCS
   Rule Actions dialog box
   Rule Conditions dialog box
   Rules Editor dialog box
   Schedule Print Date and Time dialog box
   Searching the Help
   Select Connection dialog box
   Select Header Fields dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Set Destination Node dialog box
   SNA Configuration dialog box
   Socket tab
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting Operator Console
   Troubleshooting printers
   Troubleshooting RJE connections
   Troubleshooting SPOOL
   Troubleshooting using RJE
   Troubleshooting Viewer
   Troubleshooting: Receiving jobs from the host
   Using an override table to auto-assign header fields
   Using BARR job for the NJE auto-start configuration
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the Data Conversion Utility
   Using the FCB utility
   Using the Help
   Using the LPQ command line approach
   Using the LPR command line approach
   Using the Make Banner utility
   Using the NJE Console
   Using the Operator Console
   Using the Operator Console to gather diagnostics
   Using the RJE Console
   Using the RJE Diagnostics utility
   Using the User Rights Configuration utility
   Using the Viewer
   Working with banners
   Working with LPD print queues
   Working with NJE connections
   Working with NJE routing tables
   Working with notes
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with printer groups
   Working with printer initialization files
   Working with retained documents
   Working with RJE connections
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Writing to a TCP/IP socket
   Writing to disk
    ASA Renewal dialog
    Barr Central
    Barr HPR/IP
    Choose Files dialog
    Configure
    Console
    Font Name dialog
    Help
       Learning about the Retain Window
       Learning about the Spool Window
    HPR/IP
    Import Printer Configuration dialog
    Input Conversion Utility
       Working with LPD print queues
       Working with TCP/IP sockets
    issuing
    LOAD FORMS
    LPD
    module-specific
    NJE Console
    NJE Console Help window
    Open dialog
       Import Override Table Files dialog box
       Learning about the Operator Console window
    Operator Console Help window
    Page Setup dialog
    Print dialog
       Learning about the Make Banner window
       Learning about the NJE Console window
       Learning about the Operator Console window
       Learning about the RJE Diagnostics window
    Print Setup dialog
       Learning about the Make Banner window
       Learning about the Retain Window
       Learning about the Spool Window
    Printing
       Redirecting print files (SYSOUT) to the host
       Sending files (JCL SYSIN) to the NJE host
       Sending files (JCL SYSIN) to the RJE host
       Troubleshooting printers
    remote’s
    Rename Override Table dialog
    Retain Window
    Retain Window Help window
    RJE
    Rules Editor dialog
    Save As dialog
    Saves
    Spool
    Spool Window
    Spool Window Help window
    toolbars
    use
    Viewer
    VTAM APPLID
       JES2 commands for NJE
       JES2 commands for RJE
    Waiting
    Windows Font dialog
    Windows Page Setup dialog
Displays asking
   Configuring NJE for BARR SNA
   Using the User Rights Configuration utility
   Working with override tables
   Working with page layouts
   Working with printer groups
Displays asking if
   Configuring NJE for BARR SNA
   Configuring RJE for HPR/IP (Enterprise Extender)
Displays during
Disposition
   Adding files to the spool
   Automatic Spooling tab
   Common questions for Print Utility
   Common questions for Retain Window
   Compressing data
   Data set header general section
   Data set header internal custom section
   Data set header POWER section
   Enabling and disabling the retain feature
   Getting started with Retain Window
   Job header POWER section
   Learning about the Retain Window
   Learning about the Spool Window
   Managing spool documents
   Manual Spooling tab
   Output statements
   Overview Retain Window
   POWER commands for NJE
   POWER commands for RJE
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Spooling Properties dialog box
   Working with Print Utility control files
   Working with retained documents
Distinguish
   Commands tab
   Device Control tab
   JES3 commands for RJE
   Learning about the RJE Console window
   RJE concepts
   Troubleshooting using RJE
   Using the RJE Console
   Xerox file formats
    LUs
Distribute data
    multiple destinations
Distributed COM Configuration Properties
Distributing
    SYSOUT
Ditroff
   Content tab
   File Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Supported RFC1179 features
Divide
   Configuring RJE optional settings
   Content tab
   Device Properties dialog box
   File Format tab File Port
   Learning about the RJE Console window
   Overview Header fields
   Troubleshooting printers
   Troubleshooting using RJE
   Using BARR/TRAN
   Using the RJE Console
    120-character
DJ1-32767
   JES2 commands for RJE
   Troubleshooting: Receiving jobs from the host
DJDE
   File and record formats
   Modules
   Overlay Options dialog box
   Overview BARR/TOOLS
   Product features
   Troubleshooting printers
   Working with inline Xerox resources
   Xerox file formats
    preventing
    sending
DJDE IDEN
DJDE IDEN strings
DJDE search-and-replace
DLC
   Overview BARR/RJE
   Welcome
   What's new in this release
DLL
   Installing the software
   Troubleshooting BARR/NJE
   Troubleshooting Configuration Utility
    find
    register
Dll file
Dllfile
DLOGMOD
   Communication link parameters
   Configuring the NJE auto-start feature (optional)
   Configuring VTAM for NJE
   Troubleshooting BARR/NJE
DLOGMODE
DM,'NO LUNAME FOUND
DNODE
Doc
   Data set header internal custom section
   Managing document rights
   Troubleshooting printers
   Using BARR job for the NJE auto-start configuration
DOC job
Doc.bnj
Doc.tnj
   Printing to a Xerox printer
   Working with overlays
    select
       Printing to a Xerox printer
       Working with overlays
DocBridge
   Learning about the Retain Window
   Learning about the Spool Window
   Splitting jobs
Document
   Adding files to the spool
   Advanced Printer Options dialog box
   Advanced tab LPR port
   Assigning document attribute values
   Automatic Spooling tab
   Available user rights
   Banner Options dialog box
   BARR information fields
   Barr Retain information fields
   Capturing diagnostics
   Channel Input Port dialog box
   Common questions for BARR/PRINT TCP/IP
   Common questions for BARR/TOOLS and BARR/TRANSFORMS
   Common questions for NJE
   Common questions for Print Utility
   Common questions for printers
   Common questions for Retain Window
   Common questions for SPOOL
   Common questions for Spool Window
   Common questions for the Configuration Utility
   Compressing data
   Configuring JES2 for NJE
   Configuring JES3 for NJE
   Configuring POWER for NJE
   Configuring the spool to print to a Xerox printer
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Data set header internal custom section
   Data set header LPD/user custom section
   Device Properties dialog box
   Enabling and disabling the retain feature
   Encrypting data
   File Options tab
   File Properties dialog box
   Getting started with BARR/PRINT to EPS
   Getting started with BARR/TOOLS
   Getting started with Retain Window
   Getting started with RJE
   Getting started with SPOOL
   Getting started with TRANSFORM (ADEPT Suite)
   Information on document status
   Information on printer status
   Interpreting RJE diagnostic data
   Learning about JCL (SYSIN) jobs
   Learning about the Backup Configuration Utility window
   Learning about the Diagnostics Utility window
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the Spool Window
   Learning about the User Rights window
   Learning about the Viewer window
   Lines-per-form and lines-per-inch settings
   Logmode table entry
   LPD tab
   Managing document rights
   Managing services
   Managing spool documents
   Managing spool printers
   Manual Spooling tab
   Manually configuring readers
   Opening and closing the Retain Window
   Opening and closing the Viewer utility
   Operator and Advanced rights
   Options dialog box Operator Console
   Overlay Options dialog box
   Override Table tab
   Overview BARR/PRINT to EPS
   Overview BHCS
   Overview LPR
   Overview Make FCB
   Overview NJE
   Overview Retain Window
   Overview services
   Overview SPOOL
   Overview Spool Window
   Overview TCP/IP
   Overview Technical Support
   Overview TRANSFORM
   Overview Viewer
   Page Layout tab
   Passing data to the printer without conversion
   Port Properties dialog box
   Printer Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Printing to a Windows printer
   Product features
   Receiving RJE jobs from the host
   Redirecting print files (SYSOUT) to the host
   Resource Folders tab
   Retain Start/End Date & Time dialog box
   Routing to another BHCS
   Schedule Print Date and Time dialog box
   Sending files (JCL SYSIN) to the NJE host
   Sending files (JCL SYSIN) to the RJE host
   Sending jobs to the host
   Socket tab
   Splitting jobs
   Spool and Retain tab
   Spool file processing
   Spool Printers tab
   Spooling Properties dialog box
   Supported RFC1179 features
   Tell me about printers
   Tips for routing spool documents
   Transform Configuration dialog box
   Troubleshooting BARR/PRINT to EPS
   Troubleshooting Configuration Utility
   Troubleshooting NJE
   Troubleshooting printers
   Troubleshooting SPOOL
   Troubleshooting Spool Window
   Troubleshooting TCP/IP
   Troubleshooting Viewer
   Using BARR job for the NJE auto-start configuration
   Using LPR switches
   Using the Add Sort Criteria Wizard
   Using the Backup Configuration Utility
   Using the FCB utility
   Using the Help
   Using the LPR command line approach
   Using the Make Banner utility
   Using the Viewer
   Working with banners
   Working with inline Xerox resources
   Working with LPD print queues
   Working with overlays
   Working with override tables
   Working with page layouts
   Working with Print Utility control files
   Working with retained documents
   Working with spool printers
   Working with TCP/IP sockets
   Working with the accounting system
   Working with the INI file
   Writing to a TCP/IP socket
   Writing to disk
    After printing
    Click
       Managing spool documents
       Working with retained documents
    configuring
    except
    Hold
       Learning about the Retain Window
       Learning about the Spool Window
    only examines
    Prints
    Ready
       Learning about the Retain Window
       Learning about the Spool Window
    See
    selecting
       Custom Filter dialog box
       Learning about the Retain Window
       Schedule Print Date and Time dialog box
    Spool Window
       Overview Retain Window
       Working with retained documents
    Xerox DocuPrint EPS
document's
   Compressing data
   Overview Spool Window
Document's Dest
document's page icon
Document - Copy Counts
   Data set header internal custom section
   Operator and Advanced rights
Document - Delete
   Data set header internal custom section
   Operator and Advanced rights
Document - Hold
   Data set header internal custom section
   Operator and Advanced rights
Document - Modify
   Available user rights
   Data set header internal custom section
   Operator and Advanced rights
Document - Page Range
   Available user rights
   Data set header internal custom section
   Operator and Advanced rights
Document - Priority
   Available user rights
   Data set header internal custom section
   Managing document rights
   Operator and Advanced rights
Document - Rights Override
Document - View
   Data set header internal custom section
   Learning about the Retain Window
   Learning about the Spool Window
   Managing spool documents
   Operator and Advanced rights
   Troubleshooting Viewer
   Working with retained documents
Document Assigns
Document attribute values
    Assigning
Document list
   BARR information fields
   Custom Filter dialog box
   Customizing the retain view
   Customizing the spool view
   Getting started with SPOOL
   Learning about the Retain Window
   Learning about the Spool Window
   Managing spool documents
   Receiving RJE jobs from the host
   Using BARR job for the NJE auto-start configuration
   Working with retained documents
Document menu
   Available user rights
   BARR information fields
   Managing spool documents
   Working with retained documents
Document printed
Document rights
    Managing
Document routing
Document’s
   Enabling and disabling the retain feature
   Learning about the Retain Window
   Managing spool documents
   Using the Viewer
   Working with retained documents
    change
    drag
Document’s beginning
document�s
document�s page icon
Documents according
    defined
Documents ranging
Documents waiting
DocuPrint 180 EPS
DocuSP
    HOSTS file
DocuTech 2000
   Configuring the spool to print to a Xerox printer
   Overview BARR/PRINT to EPS
   Printing to a Xerox printer
   Troubleshooting BARR/PRINT to EPS
DocuTech 2000 Series Production Publishers
   Configuring the spool to print to a Xerox printer
   Modules
   Overview BARR/PRINT to EPS
   Printing to a Xerox printer
DOE
Domain
   Choosing the correct account type
   Common questions for Services
   Configuring BARR/RJE for HPR/IP (Enterprise Extender)
   Configuring BARR/RJE for MS/LUA
   Configuring the NJE auto-start feature using NetView (optional)
   Configuring VTAM for NJE
   Connecting to the host
   Getting started with SPOOL
   Job tab
   Learning about the RJE Configuration Utility window
   Learning about the User Rights window
   Printer Properties dialog box
   Printing to a TCP/IP printer
   Printing to a Windows printer
   RJE Description tab
   Select Connection dialog box
   Sending jobs to the host
   Troubleshooting Configuration Utility
   Troubleshooting Services
   Troubleshooting Spool Window
   Using the Backup Configuration Utility
   Using the User Rights Configuration utility
   Working with BARR/RJE connections
Domain Selects
Domain Field
Domain Name
Domain/User
   Learning about the User Rights window
   Using the User Rights Configuration utility
DON'T ISSUE SHUTDOWN CALL BEFORE
DONE
DOS
   Common questions for BARR/PRINT to EPS
   Common questions for Make FCB
   Common questions for Print Utility
   Common questions for SPOOL
   Common questions for the Configuration Utility
   Common questions: Using RJE
   Communication Link tab
   File Format tab File Port
   File Format tab IP Port
   File Options tab
   Getting started with BARR/RJE
   Import Override Table Files dialog box
   Override Table tab
   Overview Print Utility
   Troubleshooting printers
   Troubleshooting: Using BARR/RJE
   Using BARR/TRAN
   Using the Data Conversion Utility
   Using the PRT utility
   Working with BARR/RJE connections
   Working with LPD print queues
   Working with override tables
   Xerox file formats
    importing
       Common questions for the Configuration Utility
       Working with BARR/RJE connections
DOS-based
DOS-based BARR/RJE
DOS-based BARR/RJE+3270
DOS ASCII
    attributes
DOS BARR/SPOOL
   Common questions: Using BARR/RJE
   File Format tab File Port
   File Format tab IP Port
    Includes
       File Format tab File Port
       File Format tab IP Port
DOS FAT Conversion
   Import Override Table Files dialog box
   Override Table tab
   Working with override tables
   Working with RJE connections
DOS FAT Conversion Utility
   Common questions for the Configuration Utility
   Import Override Table Files dialog box
   Override Table tab
   Working with BARR/RJE connections
   Working with override tables
    use
       Common questions for the Configuration Utility
       Working with BARR/RJE connections
DOS FATs
   Common questions for the Configuration Utility
   Import Override Table Files dialog box
   Override Table tab
   Working with override tables
   Working with RJE connections
    BARR/SPOOL
DOS file
DOS LPR
DOS PRT
DOS RJE
DOS RJE Forms Extraction
   Opening and closing the Make FCB utility
   Overview Make FCB
DOS RJE Forms Extraction Utility
DOS Spool Header
Double-click DataConversionUtility.exe
Double-click TransformationConfiguration.exe
   Getting started with BARR/TOOLS
   Getting started with BARR/TRANSFORM (ADEPT Suite)
Double-click UserRightsConfig.exe
Double-clicking
    printer’s Class
Down
   Advanced tab LPR port
   Common questions for TRANSFORMS
   Configure Multiple Start Times dialog box
   Customizing the retain view
   Customizing the spool view
   Enabling and disabling the retain feature
   Format Columns dialog box
   Information on printer status
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the RJE Console window
   Learning about the Spool Window
   Managing document rights
   Managing spool documents
   Managing spool printers
   Redirecting print files (SYSOUT) to the host
   Retain Start/End Date & Time dialog box
   Schedule Print Date and Time dialog box
   Select Header Fields dialog box
   Spooling Properties dialog box
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting RJE Communication scope characters
   Troubleshooting Spool Window
   Troubleshooting using RJE
   Using the Help
   Using the Make Banner utility
   Using the NJE Console
   Using the RJE Console
   Using the User Rights Configuration utility
   Using the Viewer
   Working with override tables
   Working with spool printers
    changes
Down – Searches
DOWN ARROW
DRA
Drag
   Connecting to the host
   Learning about the Make Banner window
   Learning about the Make FCB window
   Learning about the NJE Console window
   Learning about the Operator Console window
   Learning about the Retain Window
   Learning about the RJE Diagnostics window
   Learning about the Spool Window
   Learning about the Viewer window
   Managing spool documents
   Overview Spool Window
   Using the Help
   Using the Make Banner utility
    document's
    document’s
DRAIN
Drain PR1
DRAINED
Draining
   Common questions for printers
   Common questions for Spool Window
   Learning about the Spool Window
   Managing spool printers
    change
       Common questions for Spool Window
       Learning about the Spool Window
    changes
    set
    state
Drive>/SNA/SYSTEM
Driver
   Choosing ports and device drivers
   Common questions for printers
   Data set header internal custom section
   Getting started with printers
   Lines-per-form and lines-per-inch settings
   Link tab HPR/IP
   Modifying a printer's device driver settings
   Overview Backup Configuration Utility
   Overview printers
   Printer Properties dialog box
   Printing to a Windows printer
   Sending JCL files with an embedded command
   Sending jobs to the host
   Spool file processing
   Tell me about printers
   Troubleshooting Configuration Utility
   Troubleshooting printers
   Troubleshooting Viewer
   Using the Backup Configuration Utility
   Welcome
   What's new in this release
   Working with page layouts
DRND
DS
   File and record formats
   Using BARR/TRAN
DS_z
DS1
DS2
DS3
DSA
Dsdata0.log
    find
DsDataN.RES
DSITBL01
DSN
    coding
DSNAME
   Data set header general section
   Using BARR/TRAN
DSP
    starts
DSPATH
DSPATH_;C
DSPATHBASENAME
DSR
DTAFMT
DTYPE
   Configuring JES3 for NJE
   Remote definition
DU
DU,PR1
DU,RMT1
DU,RMTxxx
DUMMY
Duplicate copy
    data
Duplicate file
   Common questions for printers
   File Options tab
    selected
During
   Commands tab
   Communication link parameters
   Configuring VTAM for NJE
   JES3 commands for RJE
   Learning about the RJE Console window
   Removing the Barr software
   Troubleshooting BARR/SPOOL
   Troubleshooting Spool Window
   Troubleshooting: Using BARR/RJE
   Using the RJE Console
    Barr
       Commands tab
       JES3 commands for RJE
       Learning about the RJE Console window
       Troubleshooting: Using BARR/RJE
       Using the RJE Console
    Barr Host Communications Suite
    Barr SpoolCore
    BARR/RJE
    Spool Window's
    Xid
       Communication link parameters
       Configuring VTAM for NJE
DVI
   Content tab
   Data set header LPD/user custom section
   File Properties dialog box
   Printing to a TCP/IP print queue
   Printing to a TCP/IP printer
   Supported RFC1179 features
DVI file
   Content tab
   File Properties dialog box
Dvi files
Dynamic Job Descriptor Entry