JES3 commands for NJE
JES3 commands for RJE
Configuring the NJE auto-start feature using NetView (optional)
File and record formats
Data set header internal custom section
File and record formats
Getting help
Interpreting RJE diagnostic data
Logmode table entry
Overview Technical Support
Using the Help
Getting help
Overview Technical Support
File and record formats
Interpreting RJE diagnostic data
File and record formats
Interpreting RJE diagnostic data
File and record formats
Interpreting RJE diagnostic data
Troubleshooting Spool Window
File and record formats
Interpreting RJE diagnostic data
Special formats
File and record formats
Interpreting RJE diagnostic data
Logmode table entry
Common questions for BARR/SPOOL
Common questions for Print Utility
Common questions for the Configuration Utility
Override Table tab
Working with BARR/RJE connections
Getting help
Learning about the HTML help window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the Spool Window
Overview Technical Support
Using the Help
Common questions for BARR/NJE
Common questions: Using BARR/RJE
Learning about JCL (SYSIN) jobs
Using BARR/TRAN
Common questions for BARR/PRINT TCP/IP
Overlay Options dialog box
Sending jobs to the host
Working with overlays
Common questions for Make FCB
Overview Make FCB
Spool Printers tab
Troubleshooting Spool Window
Using the FCB utility
Working with spool printers
Learning about the Make FCB window
Using the FCB utility
Learning about the Make FCB window
Using the FCB utility
Learning about the Make FCB window
Using the FCB utility
Data set header general section
Using the FCB utility
Modules
Using the FCB utility
Configuring BARR/RJE optional settings
Device Control tab
Interpreting RJE diagnostic data
Logmode table entry
Remote definition
Troubleshooting: Receiving jobs from the host
Troubleshooting: Using BARR/RJE
Using the Data Conversion Utility
Data set header internal custom section
Output statements
Overview BARR/NJE
Troubleshooting Make FCB
Troubleshooting printers
Troubleshooting: Using BARR/RJE
Using the FCB utility
Advanced Printer Options dialog box
Available user rights
Common questions for Make FCB
Common questions for TCP/IP
Configuring BARR/RJE optional settings
Data set header general section
Data set header internal custom section
Device Control tab
Device Properties dialog box
Downloading host resources using NJE
File and record formats
JES2 commands for RJE
Learning about the Backup Configuration Utility window
Learning about the Make FCB window
Learning about the Spool Window
Lines-per-form and lines-per-inch settings
LPD header fields
Manually configuring readers
Modules
Options dialog box Operator Console
Options tab
Overview Backup Configuration Utility
Overview Make FCB
Overview product
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Product features
Remote definition
Removing the Barr software
Resource Folders tab
Routing to another BARR/SPOOL
Sending jobs to the host
Spool file processing
Spool Printers tab
Troubleshooting BARR/NJE
Troubleshooting Make FCB
Troubleshooting printers
Troubleshooting Spool Window
Troubleshooting Viewer
Troubleshooting: Receiving jobs from the host
Troubleshooting: Using BARR/RJE
Using the Add Sort Criteria Wizard
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the FCB utility
Working with BARR/RJE connections
Working with spool printers
Writing to a TCP/IP socket
Writing to disk
Data set header general section
LPD header fields
Common questions for Make FCB
Using the FCB utility
Learning about the Make FCB window
Overview Make FCB
Learning about the Make Banner window
Using the Make Banner utility
Advanced Node Settings dialog box
Automatic Spooling tab
Available user rights
Commands tab
Communication Link tab
Configuring BARR/NJE for BARR SNA
Configuring JES2 for NJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring the NJE auto-start feature (optional)
Configuring the NJE auto-start feature using NetView (optional)
Connection Control tab
Data set header general section
Data set header internal custom section
Device Control tab
Device Properties dialog box
Enhanced channel skip processing
File Format tab File Port
File Properties dialog box
Format tab
Forms command strings
Getting help
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Information on document status
Installing the software
Learning about the Make Banner window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the Spool Window
Lines-per-form and lines-per-inch settings
Logmode table entry
Modules
Options dialog box Operator Console
Options tab
Output statements
Override Table tab
Overview Backup Configuration Utility
Overview BARR/PRINT TCP/IP
Overview BARR/PRINT to EPS
Overview BARR/RJE
Overview BHCS
Overview Configuration Utility
Overview LP command line
Overview LPR
Overview Make Banner
Overview NJE
Overview Print Utility
Overview Retain Window
Overview Spool Window
Overview Technical Support
Overview TOOLS
Overview TRANSFORM
Passing data to the printer without conversion
Product features
Remote definition
Searching the Help
Select Code Pages dialog box
Sending files (JCL SYSIN) to the RJE host
SNA Configuration dialog box
Spool and Retain tab
Spool file processing
Supported RFC1179 features
Troubleshooting Configuration Utility
Troubleshooting NJE
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR/TRAN
Using the Help
Using the Make Banner utility
Using the RJE Console
Using the RJE Diagnostics utility
Using the User Rights Configuration utility
Using the Viewer
What's new in this release
Working with overlays
Working with printer initialization files
Working with TCP/IP sockets
File Properties dialog box
Overview LP command line
Overview TCP/IP
Working with TCP/IP sockets
Getting help
Overview Technical Support
Getting help
Overview Technical Support
Data set header internal custom section
File Format tab File Port
Lines-per-form and lines-per-inch settings
Sending JCL files with an embedded command
Special formats
Supported RFC1179 features
Using BARR/TRAN
Using the Data Conversion Utility
Forms command strings
JES2 commands for RJE
Barr Ficon Input Port dialog box
Configuring Ficon connections
Ficon Banner Configuration dialog box
Ficon Banner page detection example
Ficon Extraction Properties dialog box
Ficon Field Properties dialog box
Ficon Job Separation tab
Ficon Output tab
Ficon Recognition Properties dialog box
Getting Started with Barr/Print FICON
Separating Ficon jobs
Accounting tab
Adding files to the spool
Advanced Printer Options dialog box
Assigning document attribute values
BARR information fields
Barr Retain information fields
Capturing diagnostics
Commands tab
Common questions for BARR/PRINT to EPS
Common questions for BARR/SPOOL
Common questions for NJE
Common questions for Print Utility
Common questions for TCP/IP
Common questions for the Configuration Utility
Communications Profile tab
Compressing data
Configuring NJE for BARR SNA
Configuring RJE optional settings
Configuring the spool to print to a Xerox printer
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Data set header LPD/user custom section
Data set header output processing section
Data set header POWER section
Data set header RCCS section
Data set header RSCS section
Data set header security section
Define Page Layout dialog box
Device Properties dialog box
Downloading host resources using NJE
Encrypting data
File and record formats
File Format tab File Port
File Format tab IP Port
File Options tab
File Properties dialog box
Format Columns dialog box
Format tab
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Import Override Table Files dialog box
Insert Field dialog box
Job header accounting section
Job header general section
Job header JES2 section
Job header POWER section
Job header schedule section
Job header security section
Job tab
Job trailer accounting section
Job trailer general section
Learning about JCL (SYSIN) jobs
Learning about the Diagnostics Utility window
Learning about the Make Banner window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the Spool Window
Locating diagnostic files
Logmode table entry
LPD header fields
Managing document rights
Managing spool documents
Managing spool printers
Options tab
Output statements
Overlay Options dialog box
Overview Header fields
Overview Make FCB
Overview NJE
Overview Print Utility
Overview TRANSFORM
Page Layout tab
Parsing a long header field into separate fields
Port Properties dialog box
Printer Properties dialog box
Receiving RJE jobs from the host
Redirecting print files (SYSOUT) to the host
RJE concepts
RJE Description tab
Rule Actions dialog box
Rule Conditions dialog box
Rules Editor dialog box
Select Header Fields dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Special formats
Splitting jobs
Spool and Retain tab
Spool file processing
Spool Printers tab
Spooling Properties dialog box
Supported RFC1179 features
Tips for routing spool documents
Transform Configuration dialog box
Troubleshooting BARR/PRINT to EPS
Troubleshooting Configuration Utility
Troubleshooting Make FCB
Troubleshooting NJE
Troubleshooting printers
Troubleshooting RJE Communication scope characters
Troubleshooting Spool Window
Troubleshooting TCP/IP
Using an override table to auto-assign header fields
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the FCB utility
Using the Make Banner utility
Using the PRT utility
Using the RJE Console
Using the Viewer
Working with LPD print queues
Working with overlays
Working with override tables
Working with page layouts
Working with retained documents
Working with spool printers
Working with TCP/IP sockets
Working with the accounting system
Working with the INI file
Xerox file formats
Data set header 3800 section
Job header general section
Data set header general section
Job header general section
Job header schedule section
Data set header 3800 section
Data set header general section
Job header general section
Data set header general section
Job header general section
File Properties dialog box
Port Properties dialog box
Advanced Printer Options dialog box
Compressing data
Customizing the retain view
Customizing the spool view
Format Columns dialog box
Overlay Options dialog box
Overview Header fields
Spooling Properties dialog box
Using the Add Sort Criteria Wizard
Working with overlays
Rule Actions dialog box
Rule Conditions dialog box
Job header security section
Rule Actions dialog box
Rule Conditions dialog box
Using the RJE Console
Rule Actions dialog box
Using the Make Banner utility
Data set header output processing section
Working with the accounting system
File and record formats
Merge Override Table Files dialog box
Working with override tables
Compressing data
Overview Print Utility
Xerox file formats
Common questions for the Configuration Utility
Import Override Table Files dialog box
Working with override tables
Common questions for the Configuration Utility
Import Override Table Files dialog box
Advanced Printer Options dialog box
Common questions for Print Utility
File and record formats
File Format tab File Port
File Format tab IP Port
Format tab
Getting started with TRANSFORM (ADEPT Suite)
Overview TCP/IP
Spool file processing
Troubleshooting printers
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR/TRAN
Working with overlays
Common questions for printers
Troubleshooting using RJE
Compressing data
File Options tab
Modifying a printer's port settings
Options dialog box Operator Console
Overview printers
Spool file processing
Troubleshooting printers
Writing to disk
Compressing data
Spool file processing
Writing to disk
Learning about the NJE Console window
Learning about the Retain Window
Manually sending the diagnostic file
Overview Technical Support
Manually sending the diagnostic file
Overview Technical Support
Adding files to the spool
Assigning document attribute values
Manual Spooling tab
Output statements
Override Table tab
Supported RFC1179 features
Troubleshooting Print Utility
Working with overlays
File Options tab
Troubleshooting: Using BARR/RJE
Using the Data Conversion Utility
Assigning document attribute values
Common questions for Print Utility
Data set header general section
File Options tab
Output statements
Using BARR/TRAN
Using the PRT utility
Adding files to the spool
Advanced Printer Options dialog box
Advanced tab LPR port
Assigning document attribute values
Automatic Spooling tab
Available user rights
Banner Options dialog box
Capturing a TCP/IP socket trace
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Capturing an LPD trace
Capturing diagnostics
Chain Selection dialog box
Channel Input Port dialog box
Choosing files to include in the diagnostics
Choosing ports and device drivers
Common questions for BARR/NJE
Common questions for BARR/PRINT to EPS
Common questions for BARR/SPOOL
Common questions for BARR/TOOLS and BARR/TRANSFORMS
Common questions for Make FCB
Common questions for Print Utility
Common questions for printers
Common questions for Retain Window
Common questions for Services
Common questions for Spool Window
Common questions for TCP/IP
Common questions: Configuring RJE
Common questions: Using RJE
Compressing data
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring BARR/RJE optional settings
Configuring the spool to print to a Xerox printer
Connecting to the host
Connection Control tab
Content tab
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Data set header LPD/user custom section
Data set header RCCS section
Data set header RSCS section
Device Control tab
Device Properties dialog box
Disk Settings dialog box
Downloading host resources using NJE
Enabling and disabling the retain feature
Enabling the 'Print directly to the printer' setting
Encrypting data
Enhanced channel skip processing
File and record formats
File Format tab File Port
File Format tab IP Port
File Options tab
File Properties dialog box
Format tab
Forms tab
Getting started with BARR/SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Headers From Data Configuration dialog box
Identifying Barr components
Import Override Table Files dialog box
Information on document status
Installing the software
Interpreting Barr Messages
Interpreting RJE diagnostic data
IP Configuration tab
Job header general section
Job tab
Job trailer general section
Learning about JCL (SYSIN) jobs
Learning about the Backup Configuration Utility window
Learning about the Diagnostics Utility window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Configuration Utility window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Locating diagnostic files
Logmode table entry
LPD header fields
LPD tab
Managing document rights
Managing spool documents
Managing spool printers
Manual Spooling tab
Manually configuring readers
Manually sending the diagnostic file
Merge Override Table Files dialog box
Modifying a printer's port settings
Modifying the default spool folders
Modules
Mount Forms dialog box
Notes tab
Opening and closing the BARR/NJE utility
Opening and closing the BARR/RJE utility
Opening and closing the Make Banner utility
Opening and closing the Make FCB utility
Opening and closing the Operator Console utility
Opening and closing the Viewer utility
Options dialog box Operator Console
Options tab
Output statements
Overlay Options dialog box
Override Table tab
Overview Backup Configuration Utility
Overview BARR/PRINT to EPS
Overview BHCS
Overview Diagnostics Utility
Overview LP command line
Overview LPR
Overview Make FCB
Overview Print Utility
Overview printers
Overview Retain Window
Overview RJE
Overview services
Overview SPOOL
Overview Spool Window
Overview TCP/IP
Overview Technical Support
Overview TOOLS
Overview TRANSFORM
Port Properties dialog box
Printer Groups tab
Printer Properties dialog box
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Product features
Redirecting print files (SYSOUT) to the host
Remote definition
Removing the Barr software
Resource Folders tab
RJE concepts
RJE Description tab
Routing to another BHCS
Rule Actions dialog box
Rules Editor dialog box
Searching the Help
Select Code Pages dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Sending jobs to the host
Socket tab
Special formats
Splitting jobs
Spool and Retain tab
Spool file processing
Spool output ports and device drivers
Spool Printers tab
Spooling Properties dialog box
Supported RFC1179 features
Tell me about printers
Tips for routing spool documents
Trace tab HPR/IP
Transform Configuration dialog box
Troubleshooting Configuration Utility
Troubleshooting NJE
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting Retain Window
Troubleshooting SPOOL
Troubleshooting Spool Window
Troubleshooting TCP/IP
Troubleshooting using RJE
Troubleshooting Viewer
Using an override table to auto-assign header fields
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using LPR switches
Using the Add Sort Criteria Wizard
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the FCB utility
Using the Help
Using the LPR command line approach
Using the LPRM command line approach
Using the NJE Console
Using the Operator Console
Using the Operator Console to gather diagnostics
Using the PRT utility
Using the RJE Console
Using the RJE Diagnostics utility
Using the Viewer
Welcome
What's new in this release
Working with banners
Working with BARR/RJE connections
Working with inline Xerox resources
Working with LPD print queues
Working with NJE routing tables
Working with notes
Working with overlays
Working with override tables
Working with Print Utility control files
Working with printer groups
Working with printer initialization files
Working with retained documents
Working with spool printers
Working with TCP/IP sockets
Working with the INI file
Writing to a TCP/IP socket
Writing to disk
Xerox file formats
Manually sending the diagnostic file
Using the Backup Configuration Utility
Compressing data
Sending files (JCL SYSIN) to the RJE host
Data set header internal custom section
Learning about the Spool Window
Automatic Spooling tab
Spooling Properties dialog box
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring BARR/RJE optional settings
Working with BARR/RJE connections
Overview printers
Tell me about printers
Common questions for BARR/NJE
Common questions for printers
Capturing a TCP/IP socket trace
Capturing an LPD trace
Locating diagnostic files
Modules
Overview BARR/PRINT to EPS
Data set header general section
Using the PRT utility
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Learning about the Retain Window
Learning about the Spool Window
Learning about the Retain Window
Learning about the Spool Window
Content tab
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
File Properties dialog box
Learning about the Operator Console window
Learning about the Retain Window
Learning about the Spool Window
Managing spool documents
Overview Operator Console
Supported RFC1179 features
Using the Operator Console
Customizing the retain view
Customizing the spool view
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Automatic Spooling tab
Choosing files to include in the diagnostics
Common questions for BARR/PRINT to EPS
Common questions for BARR/TOOLS and BARR/TRANSFORMS
Common questions for Make FCB
Common questions for NJE
Common questions for Operator Console
Common questions for Print Utility
Common questions for printers
Common questions for Retain Window
Common questions for RJE
Common questions for Services
Common questions for SPOOL
Common questions for Spool Window
Common questions for TCP/IP
Common questions for Technical Support
Common questions for the Configuration Utility
Common questions: Configuring RJE
Common questions: Managing connections
Common questions: Using RJE
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring POWER for RJE
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Data set header general section
Getting help
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Learning about the Spool Window
Learning about the Viewer window
Managing spool documents
Overview Viewer
Searching the Help
Transform Configuration dialog box
Troubleshooting BARR/NJE
Troubleshooting BARR/SPOOL
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting Technical Support
Troubleshooting using RJE
Using the Help
Using the Operator Console
Using the RJE Console
Using the Viewer
Working with inline Xerox resources
Working with overlays
Working with retained documents
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Transform Configuration dialog box
Learning about the RJE Console window
Learning about the Viewer window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Using the RJE Console
Learning about the Viewer window
Managing spool documents
Using the Operator Console
Using the RJE Console
Using the Viewer
Working with retained documents
Adding files to the spool
Capturing a TCP/IP socket trace
Capturing an LPD trace
Common questions for Services
Common questions for Spool Window
Common questions for TCP/IP
Communication link parameters
Compressing data
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring the spool to print to a Xerox printer
Connection Control tab
Customizing the retain view
Customizing the spool view
Data set header internal custom section
File and record formats
Information on printer status
Installing the software
JES2 commands for NJE
JES2 commands for RJE
Job trailer general section
Learning about the Spool Window
Locating diagnostic files
Managing spool documents
Managing spool printers
Manually configuring readers
Modifying a printer's device driver settings
Modifying a printer's port settings
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Remote definition
Routing to another BHCS
Sending files (JCL SYSIN) to the RJE host
Sending jobs to the host
Troubleshooting printers
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the RJE Console
Working with retained documents
Working with RJE connections
Writing to a TCP/IP socket
Writing to disk
Customizing the retain view
Customizing the spool view
Using BARR job for the NJE auto-start configuration
Using the Add Sort Criteria Wizard
Communication link parameters
Compressing data
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Manually configuring readers
Modifying a printer's device driver settings
Modifying a printer's port settings
Printing to a TCP/IP print queue
Printing to a Xerox printer
Routing to another BHCS
Sending files (JCL SYSIN) to the RJE host
Sending jobs to the host
Working with RJE connections
Writing to a TCP/IP socket
Writing to disk
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Working with RJE connections
Compressing data
Manually configuring readers
Printing to a TCP/IP print queue
Printing to a Xerox printer
Routing to another BHCS
Sending jobs to the host
Writing to a TCP/IP socket
Writing to disk
Common questions for Spool Window
Data set header internal custom section
Information on printer status
Learning about the Spool Window
Troubleshooting printers
Communication link parameters
Compressing data
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Manually configuring readers
Modifying a printer's device driver settings
Modifying a printer's port settings
Printing to a TCP/IP print queue
Printing to a Xerox printer
Routing to another BHCS
Sending files (JCL SYSIN) to the RJE host
Sending jobs to the host
Working with RJE connections
Writing to a TCP/IP socket
Writing to disk
BARR information fields
Channel Input Port dialog box
Commands tab
Common questions for BARR/NJE
Common questions for BARR/PRINT to EPS
Common questions for Make FCB
Common questions for Print Utility
Common questions for printers
Common questions for Spool Window
Common questions for TCP/IP
Common questions: Configuring RJE
Common questions: Using RJE
Communication Link tab
Configuring BARR/RJE optional settings
Configuring the spool to print to a Xerox printer
Connection Control tab
Content tab
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Device Properties dialog box
Encrypting data
File and record formats
File Options tab
Getting help
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Headers From Data Configuration dialog box
HPR/IP Connection Configuration dialog box
Information on document status
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Job header accounting section
Job header general section
Job header POWER section
Job tab
Learning about JCL (SYSIN) jobs
Learning about the Backup Configuration Utility window
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the Spool Window
Learning about the Viewer window
LPD header fields
Managing spool documents
Manually configuring readers
Merge Override Table Files dialog box
Options tab
Output statements
Overview Header fields
Overview Technical Support
Parsing a long header field into separate fields
Port Properties dialog box
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Rule Actions dialog box
Rules Editor dialog box
Searching the Help
Sending files (JCL SYSIN) to the NJE host
Sending JCL files with an embedded command
Sending jobs to the host
Special formats
Splitting jobs
Spool and Retain tab
Supported RFC1179 features
Tips for routing spool documents
Transform Configuration dialog box
Troubleshooting Configuration Utility
Troubleshooting NJE
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting receiving RJE jobs from the host
Troubleshooting SPOOL
Troubleshooting TCP/IP
Troubleshooting using RJE
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the Help
Using the Make Banner utility
Using the RJE Console
Using the User Rights Configuration utility
Using the Viewer
Working with inline Xerox resources
Working with NJE profiles
Working with overlays
Working with override tables
Working with page layouts
Working with retained documents
Working with TCP/IP sockets
Xerox file formats
Data set header 3800 section
Data set header general section
Common questions for Print Utility
Common questions: Using RJE
File Options tab
Merge Override Table Files dialog box
Working with override tables
Advanced Printer Options dialog box
Data set header output processing section
File Format tab File Port
File Format tab IP Port
Format tab
Sending JCL files with an embedded command
Using BARR/TRAN
File Format tab File Port
File Format tab IP Port
Sending JCL files with an embedded command
Using BARR/TRAN
Contacting Barr Systems
Manually sending the diagnostic file
Data set header 3800 section
Troubleshooting: Receiving jobs from the host
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Lines-per-form and lines-per-inch settings
Overview Technical Support
Configuring VTAM for NJE
Interpreting RJE diagnostic data
Troubleshooting: Using BARR/RJE
Using BARR/TRAN
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring POWER for RJE
Configuring VTAM for NJE
Interpreting RJE diagnostic data
Logmode table entry
RJE Description tab
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Xerox file formats
Assigning document attribute values
Data set header general section
File Options tab
Using the Backup Configuration Utility
Adding files to the spool
Overlay Options dialog box
Resource Folders tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Spool and Retain tab
Spooling Properties dialog box
Using the Backup Configuration Utility
Adding files to the spool
Assigning document attribute values
BARR information fields
Barr Retain information fields
Common questions for Print Utility
Common questions for TRANSFORMS
Data set header general section
Learning about the Backup Configuration Utility window
Overlay Options dialog box
Resource Folders tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Using the Add Sort Criteria Wizard
Using the Backup Configuration Utility
Working with overlays
Adding files to the spool
Advanced tab LPR port
Assigning document attribute values
Automatic Spooling tab
Banner Options dialog box
BARR information fields
Barr Retain information fields
Capturing a TCP/IP socket trace
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Capturing an LPD trace
Capturing diagnostics
Channel Input Port dialog box
Choosing files to include in the diagnostics
Common questions for NJE
Common questions for Print Utility
Common questions for printers
Common questions for Services
Common questions for SPOOL
Common questions for Spool Window
Common questions for the Configuration Utility
Common questions for TRANSFORMS
Configuring RJE optional settings
Connecting to the host
Connection Control tab
Customizing the retain view
Customizing the spool view
Data set header general section
Device Control tab
Downloading host resources using NJE
Enabling and disabling the retain feature
Enabling the 'Print directly to the printer' setting
Encrypting data
File Options tab
Format tab
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Getting started with SPOOL
Headers From Data Configuration dialog box
Identifying Barr components
Installing the software
Learning about the Backup Configuration Utility window
Learning about the Diagnostics Utility window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Retain Window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Locating diagnostic files
LPD tab
Managing document rights
Managing spool documents
Manual Spooling tab
Manually configuring readers
Modifying a printer's device driver settings
Modifying a printer's port settings
Modifying the default spool folders
Options dialog box Operator Console
Overlay Options dialog box
Overview BHCS
Overview Diagnostics Utility
Overview Make FCB
Overview NJE
Overview Print Utility
Overview Retain Window
Overview services
Printer Properties dialog box
Printing to a TCP/IP printer
Printing to a Windows printer
Removing the Barr software
Resource Folders tab
Routing tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Sending jobs to the host
Socket tab
Spool and Retain tab
Spool file processing
Spool Printers tab
Spooling Properties dialog box
Trace tab HPR/IP
Transform Configuration dialog box
Troubleshooting Configuration Utility
Troubleshooting Make FCB
Troubleshooting NJE
Troubleshooting printers
Troubleshooting Services
Troubleshooting SPOOL
Troubleshooting Spool Window
Troubleshooting using RJE
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the FCB utility
Using the NJE Console
Using the Operator Console
Using the Operator Console to gather diagnostics
Using the PRT utility
Using the RJE Console
Using the RJE Diagnostics utility
Using the User Rights Configuration utility
Welcome
What's new in this release
Working with banners
Working with inline Xerox resources
Working with NJE routing tables
Working with overlays
Working with Print Utility control files
Working with printer initialization files
Working with retained documents
Working with RJE connections
Working with spool printers
Working with the INI file
Common questions for BARR/NJE
Configuring JES2 for NJE
Configuring JES2 for RJE
Configuring JES3 for NJE
Configuring JES3 for RJE
Configuring POWER for NJE
Configuring POWER for RJE
Configuring TCP/IP and VTAM for HPR/IP
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Learning about JCL (SYSIN) jobs
Operator and Advanced rights
Overview Technical Support
Redirecting print files (SYSOUT) to the host
Troubleshooting BARR/NJE
Using BARR/TRAN
Using the Data Conversion Utility
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Available user rights
Common questions for printers
Common questions for TCP/IP
Common questions for TRANSFORMS
Content tab
Data set header 3800 section
Data set header internal custom section
Data set header LPD/user custom section
Define Page Layout dialog box
Display Properties tab
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Learning about the Backup Configuration Utility window
Learning about the Make Banner window
Learning about the RJE Console window
Learning about the Viewer window
LPD header fields
Overview TOOLS
Overview Viewer
Page Layout tab
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Supported RFC1179 features
Troubleshooting Configuration Utility
Troubleshooting printers
Troubleshooting Viewer
Using LPR switches
Using the Data Conversion Utility
Using the Help
Using the Make Banner utility
Using the NJE Console
Using the RJE Console
Using the Viewer
Working with page layouts
Working with the INI file
Xerox file formats
Using the Viewer
Working with page layouts
Display Properties tab
Learning about the RJE Console window
Using the RJE Console
Define Page Layout dialog box
Working with page layouts
Configuring POWER for NJE
Data set header general section
Data set header internal custom section
Job header general section
Available user rights
Common questions for Make FCB
Enhanced channel skip processing
File Format tab File Port
File Format tab IP Port
Format tab
Learning about the Spool Window
Managing spool printers
Sending JCL files with an embedded command
Using BARR/TRAN
Using the Data Conversion Utility
Assigning document attribute values
Common questions for BARR/PRINT TCP/IP
Common questions for TRANSFORMS
Common questions: Using RJE
Configuring RJE optional settings
Data set header general section
Device Control tab
Device Properties dialog box
Forms command strings
Forms tab
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
JES2 commands for RJE
Job header general section
Options tab
Output statements
Overview Make FCB
Remote definition
Spool Printers tab
Troubleshooting printers
Troubleshooting Spool Window
Troubleshooting TCP/IP
Troubleshooting using RJE
Using the Add Sort Criteria Wizard
Using the PRT utility
Working with spool printers
Adding files to the spool
Advanced Printer Options dialog box
BARR information fields
Barr Retain information fields
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Chain Selection dialog box
Channel Input Port dialog box
Common questions for BARR/PRINT TCP/IP
Common questions for NJE
Common questions for Print Utility
Common questions for printers
Common questions for SPOOL
Common questions for Spool Window
Common questions: Using RJE
Communication link parameters
Compressing data
Configure Multiple Start Times dialog box
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring JES2 for RJE
Configuring JES3 for RJE
Configuring POWER for RJE
Configuring RJE optional settings
Configuring the spool to print to a Xerox printer
Connection Control tab
Content tab
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header general section
Data set header internal custom section
Data set header LPD/user custom section
Data set header POWER section
Data set header RCCS section
Data set header security section
Device Control tab
Device Properties dialog box
Downloading host resources using NJE
Encrypting data
Enhanced channel skip processing
File and record formats
File Format tab File Port
File Format tab IP Port
File Options tab
File Properties dialog box
Format Columns dialog box
Format tab
Forms tab
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Interpreting RJE diagnostic data
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Job header general section
Job header POWER section
Job header security section
Job tab
Job trailer general section
Learning about the Make FCB window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the Spool Window
Lines-per-form and lines-per-inch settings
Locating diagnostic files
Logmode table entry
LPD header fields
Managing spool documents
Manually configuring readers
Modules
Mount Forms dialog box
Output statements
Override Table tab
Overview BHCS
Overview Make FCB
Overview RJE
Overview SNA connectivity for NJE
Overview Spool Window
Passing data to the printer without conversion
POWER commands for NJE
POWER commands for RJE
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Product features
Remote definition
RJE concepts
RJE Description tab
Routing to another BHCS
Rules Editor dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Sending jobs to the host
Special formats
Spool file processing
Supported RFC1179 features
Tell me about printers
Trace tab HPR/IP
Transform Configuration dialog box
Troubleshooting BARR/NJE
Troubleshooting Configuration Utility
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting TCP/IP
Troubleshooting using RJE
Troubleshooting Viewer
Troubleshooting: Managing connections
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using LPR switches
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the FCB utility
Using the Operator Console
Using the PRT utility
Using the RJE Console
Using the Viewer
Working with banners
Working with overlays
Working with page layouts
Working with printer initialization files
Working with spool printers
Working with TCP/IP sockets
Writing to a TCP/IP socket
Writing to disk
Xerox file formats
Troubleshooting BARR/NJE
Troubleshooting: Managing connections
BARR information fields
Barr Retain information fields
Common questions for BARR/PRINT TCP/IP
Configuring the spool to print to a Xerox printer
Customizing the retain view
Customizing the spool view
Format Columns dialog box
Learning about the Retain Window
Learning about the Spool Window
Using BARR job for the NJE auto-start configuration
BARR information fields
Format Columns dialog box
Learning about the Spool Window
File and record formats
Special formats
Xerox file formats
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
RJE Description tab
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Data set header internal custom section
Getting started with BARR/TRANSFORM (ADEPT Suite)
LPD header fields
Working with the INI file
Data set header internal custom section
LPD header fields
Data set header internal custom section
LPD header fields
Output statements
Overview BARR/NJE
Troubleshooting: Using BARR/RJE
Using the PRT utility
Assigning document attribute values
Available user rights
Commands tab
Common questions for Make FCB
Common questions for NJE
Common questions for Print Utility
Common questions for SPOOL
Common questions for TCP/IP
Common questions for TRANSFORMS
Common questions: Using BARR/RJE
Communicating with the NJE host
Configuring RJE optional settings
Connection Control tab
Data set header 3800 section
Data set header general section
Data set header internal custom section
Device Control tab
Device Properties dialog box
Downloading host resources using NJE
Enhanced channel skip processing
File and record formats
File Format tab File Port
File Format tab IP Port
Format tab
Forms command strings
Forms tab
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for RJE
Job header general section
Learning about JCL (SYSIN) jobs
Learning about the Make FCB window
Learning about the RJE Console window
Learning about the Spool Window
Lines-per-form and lines-per-inch settings
Logmode table entry
LPD header fields
Managing spool printers
Mount Forms dialog box
Options tab
Output statements
Overview BHCS
Overview Make FCB
Overview NJE
Overview RJE
Parsing a long header field into separate fields
Printer Properties dialog box
Product features
Remote definition
Resource Folders tab
Sending JCL files with an embedded command
Spool file processing
Spool Printers tab
Transform Configuration dialog box
Troubleshooting BARR/PRINT TCP/IP
Troubleshooting Configuration Utility
Troubleshooting printers
Troubleshooting Spool Window
Troubleshooting using RJE
Troubleshooting Viewer
Troubleshooting: Receiving jobs from the host
Using BARR/TRAN
Using the Add Sort Criteria Wizard
Using the Data Conversion Utility
Using the FCB utility
Using the PRT utility
Using the RJE Console
Using the Viewer
Version and trademark
Working with overlays
Working with RJE connections
Working with spool printers
Xerox file formats
Common questions: Using BARR/RJE
Troubleshooting: Receiving jobs from the host
Common questions for Make FCB
File and record formats
Lines-per-form and lines-per-inch settings
Overview product
Remote definition
Troubleshooting printers
Troubleshooting Viewer
Overview product
Troubleshooting Viewer
Forms tab
Mount Forms dialog box
Using the RJE Console
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Content tab
Data set header LPD/user custom section
File Properties dialog box
Format tab
Supported RFC1179 features
Using LPR switches
Data set header general section
Data set header RCCS section
Data set header security section
JES2 commands for RJE
JES3 commands for RJE
Job header general section
Job header security section
Learning about the HTML help window
Overview Technical Support
Using the Viewer
Data set header 3800 section
File and record formats
Merge Override Table Files dialog box
Working with override tables
Common questions: Configuring RJE
Communication link parameters
Configuring NJE for BARR SNA
Configuring POWER for NJE
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring the NJE auto-start feature using NetView (optional)
Configuring VTAM for NJE
Configuring VTAM for RJE
HPR/IP Connection Configuration dialog box
Interpreting RJE diagnostic data
Learning about the RJE Diagnostics window
Overview Technical Support
Troubleshooting NJE
Troubleshooting RJE Communication scope characters
Troubleshooting using RJE
Common questions for Spool Window
Disk Settings dialog box
Interpreting Barr Messages
Overview Retain Window
Overview Technical Support
Spool and Retain tab
Xerox file formats
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Xerox file formats
Managing spool documents
Working with retained documents
Forms command strings
Using BARR/TRAN
Contacting Barr Systems
Data set header internal custom section
Getting help
Learning about the Spool Window
Manually sending the diagnostic file
Overview Technical Support
Welcome
What's new in this release
Advanced Printer Options dialog box
Assigned user rights
Common questions for NJE
Common questions for Print Utility
Getting help
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Interpreting RJE diagnostic data
Learning about the RJE Diagnostics window
Overview Technical Support
Overview User Rights Configuration utility
Parsing a long header field into separate fields
Sending JCL files with an embedded command
Spool and Retain tab
Troubleshooting using RJE
Using the Data Conversion Utility
Using the PRT utility
Working with overlays
Working with the accounting system
Working with the INI file
Available user rights
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Choosing the correct account type
Commands tab
Communication Link tab
Configuring RJE for HPR/IP (Enterprise Extender)
Configuring RJE for MS/LUA
Configuring RJE optional settings
Configuring VTAM for NJE
Data set header internal custom section
Job tab
Learning about the Retain Window
Learning about the RJE Console window
Logmode table entry
Overview Print Utility
Overview RJE
Overview services
Remote definition
Searching the Help
Sending files (JCL SYSIN) to the RJE host
Trace tab HPR/IP
Transform Configuration dialog box
Troubleshooting NJE
Troubleshooting RJE Communication scope characters
Troubleshooting using RJE
Using the Help
Using the Operator Console
Working with LPD print queues