Capturing diagnostics
Choosing files to include in the diagnostics
Contacting Barr Systems
Getting help
Identifying Barr components
Learning about the Diagnostics Utility window
Locating diagnostic files
Manually sending the diagnostic file
Overview Diagnostics Utility
Overview Technical Support
Capturing diagnostics
Locating diagnostic files
Interpreting RJE diagnostic data
Logmode table entry
Data set header general section
File and record formats
File Format tab File Port
File Format tab IP Port
Format tab
Sending JCL files with an embedded command
Troubleshooting printers
Using BARR/TRAN
Using the Data Conversion Utility
Advanced Printer Options dialog box
Common questions for BARR/NJE
Common questions for BARR/PRINT TCP/IP
Common questions for Print Utility
Common questions for printers
Common questions: Using BARR/RJE
Data set header internal custom section
File and record formats
File Format tab File Port
File Format tab IP Port
Format tab
Learning about the Viewer window
Managing spool documents
Overview Viewer
Printing to a Xerox printer
Product features
Select Code Pages dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Special formats
Spool file processing
Troubleshooting Configuration Utility
Troubleshooting Print Utility
Troubleshooting printers
Troubleshooting: Using BARR/RJE
Using BARR/TRAN
Using the Data Conversion Utility
Using the Viewer
Welcome
What's new in this release
Working with overlays
Working with printer initialization files
Working with retained documents
Writing to a TCP/IP socket
Common questions: Using BARR/RJE
Format tab
Sending JCL files with an embedded command
Special formats
Troubleshooting Print Utility
Troubleshooting: Using BARR/RJE
Working with overlays
File Format tab File Port
File Format tab IP Port
File Format tab File Port
File Format tab IP Port
Common questions for Make FCB
Downloading host resources using NJE
Job tab
Learning about the Diagnostics Utility window
Learning about the Make FCB window
Learning about the Spool Window
Managing spool documents
Managing spool printers
Overview BHCS
Overview Make FCB
Receiving RJE jobs from the host
Rule Conditions dialog box
Tips for routing spool documents
Troubleshooting: Managing connections
Using BARR job for the NJE auto-start configuration
Using BARR/TRAN
Using the FCB utility
Using the Help
Using the Make Banner utility
Using the Operator Console
Using the RJE Console
Using the Viewer
Working with retained documents
Working with spool printers
Working with the INI file
Learning about the Make FCB window
Using the FCB utility
Overview BARR/RJE
Overview NJE
File Format tab File Port
File Format tab IP Port
File Options tab
Format tab
Communications Profile tab
Working with override tables
Accounting tab
Adding files to the spool
Advanced Printer Options dialog box
Advanced tab LPR port
Automatic Spooling tab
Available user rights
BARR information fields
Capturing an HPR/IP trace for NJE
Capturing an HPR/IP trace for RJE
Commands tab
Common questions for Make FCB
Common questions for printers
Common questions for TCP/IP
Common questions: Using BARR/RJE
Communication Link tab
Configuring BARR/RJE optional settings
Configuring the NJE auto-start feature (optional)
Content tab
Device Control tab
Device Properties dialog box
Enabling and disabling the retain feature
Enabling the 'Print directly to the printer' setting
File Options tab
Forms tab
Getting started using a Barr SNA connection
Getting started with SPOOL
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Installing the software
IP Configuration tab
Job tab
Learning about the Retain Window
Learning about the Spool Window
Learning about the User Rights window
Learning about the Viewer window
Lines-per-form and lines-per-inch settings
Locating diagnostic files
Logmode table entry
Managing services
Managing spool documents
Mount Forms dialog box
Options dialog box Operator Console
Options tab
Overlay Options dialog box
Overview BARR/PRINT to EPS
Overview LPR
Overview RJE
Overview services
Overview SNA connectivity for NJE
Printing to a Xerox printer
Remote definition
RJE concepts
Searching the Help
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Set Destination Node dialog box
Splitting jobs
Spool and Retain tab
Spool file processing
Tell me about printers
Trace tab HPR/IP
Troubleshooting Configuration Utility
Troubleshooting Configuring RJE
Troubleshooting NJE
Troubleshooting printers
Troubleshooting Services
Troubleshooting using RJE
Using BARR job for the NJE auto-start configuration
Using the Data Conversion Utility
Using the Operator Console
Using the Operator Console to gather diagnostics
Using the Viewer
Working with NJE connections
Working with page layouts
Working with retained documents
Working with spool printers
Writing to a TCP/IP socket
Common questions: Using BARR/RJE
Troubleshooting Services
Accounting tab
Working with the accounting system
Device Control tab
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Learning about the Spool Window
Learning about the User Rights window
Options dialog box Operator Console
Spool and Retain tab
Using the Operator Console
Using the Operator Console to gather diagnostics
Commands tab
Overlay Options dialog box
Options dialog box Operator Console
Overview services
Options dialog box Operator Console
Overview services
Data set header internal custom section
Encrypting data
Data set header internal custom section
Encrypting data
Configuring POWER for NJE
Configuring the NJE auto-start feature using NetView (optional)
Using the Viewer
Working with overlays
Enabling and disabling the retain feature
Retain Start/End Date & Time dialog box
Common questions: Configuring BARR/RJE
File and record formats
Format tab
Learning about the NJE Console window
Learning about the RJE Console window
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Format tab
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Printing to a Xerox printer
Writing to a TCP/IP socket
Adding files to the spool
Advanced Node Settings dialog box
Assigning document attribute values
Available user rights
Barr SNA Configuration dialog box
Choosing the correct account type
Commands tab
Common questions for Make FCB
Common questions for NJE
Common questions for Print Utility
Common questions for printers
Common questions for Services
Common questions for SPOOL
Common questions for the Configuration Utility
Common questions: Configuring RJE
Common questions: Using RJE
Communication link parameters
Communication Link tab
Compressing data
Configure Multiple Start Times dialog box
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Configuring JES2 for NJE
Configuring JES2 for RJE
Configuring JES3 for NJE
Configuring JES3 for RJE
Configuring POWER for NJE
Configuring POWER for RJE
Configuring RJE optional settings
Configuring TCP/IP and VTAM for HPR/IP
Configuring the NJE auto-start feature (optional)
Configuring the spool to print to a Xerox printer
Configuring VTAM for NJE
Configuring VTAM for RJE
Connection Control tab
Determining the communication paths
Device Control tab
Device Properties dialog box
Disk Settings dialog box
Downloading host resources using NJE
Enabling and disabling the retain feature
Encrypting data
File Options tab
Format Columns dialog box
Format tab
Forms command strings
Forms tab
Import Override Table Files dialog box
Installing the software
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
Job header general section
Learning about JCL (SYSIN) jobs
Learning about the Backup Configuration Utility window
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the RJE Configuration Utility window
Learning about the RJE Console window
Learning about the Spool Window
Logmode table entry
Managing document rights
Managing spool documents
Managing spool printers
Manual Spooling tab
Manually configuring readers
Notes tab
Options dialog box Operator Console
Overlay Options dialog box
Overview BHCS
Overview NJE
Overview Retain Window
Parsing a long header field into separate fields
POWER commands for NJE
POWER commands for RJE
Printing to a TCP/IP print queue
Printing to a TCP/IP printer
Printing to a Windows printer
Printing to a Xerox printer
Redirecting print files (SYSOUT) to the host
Remote definition
Resource Folders tab
Retain Start/End Date & Time dialog box
RJE concepts
RJE Description tab
Routing tab
Routing to another BHCS
Rule Actions dialog box
Rule Conditions dialog box
Select Code Pages dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Sending jobs to the host
Set Destination Node dialog box
Splitting jobs
Spool file processing
Tips for routing spool documents
Troubleshooting BARR/NJE
Troubleshooting Configuration Utility
Troubleshooting receiving RJE jobs from the host
Troubleshooting RJE connections
Troubleshooting Services
Troubleshooting using RJE
Using an override table to auto-assign header fields
Using BARR job for the NJE auto-start configuration
Using the Backup Configuration Utility
Using the Data Conversion Utility
Using the FCB utility
Using the Help
Using the LPQ command line approach
Using the LPR command line approach
Using the LPRM command line approach
Using the Make Banner utility
Using the NJE Console
Using the Operator Console
Using the PRT utility
Using the RJE Console
Using the Viewer
Working with BARR/RJE connections
Working with NJE profiles
Working with NJE routing tables
Working with notes
Working with overlays
Working with override tables
Working with printer groups
Working with retained documents
Working with spool printers
Working with TCP/IP sockets
Working with the accounting system
Writing to a TCP/IP socket
Writing to disk
Configuring BARR/NJE for BARR SNA
Working with the accounting system
Working with BARR/RJE connections
Working with the accounting system
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Barr SNA Configuration dialog box
Configuring the NJE auto-start feature (optional)
Configuring VTAM for NJE
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Printing to a Windows printer
Sending jobs to the host
Working with TCP/IP sockets
Printing to a Windows printer
Sending jobs to the host
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Overview Retain Window
Working with retained documents
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring BARR/RJE for MS/LUA
Common questions for Print Utility
Compressing data
Managing document rights
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for NJE
JES3 commands for RJE
POWER commands for NJE
POWER commands for RJE
Common questions for printers
Common questions for Services
Troubleshooting Services
Barr SNA Configuration dialog box
Communication link parameters
Communication Link tab
Configuring BARR/NJE for BARR SNA
Configuring BARR/RJE for HPR/IP (Enterprise Extender)
Configuring TCP/IP and VTAM for HPR/IP
Configuring VTAM for NJE
Configuring VTAM for RJE
Getting started using a Barr SNA connection
Link tab HPR/IP
Optimizing Microsoft SNA gateway with Enterprise Extender (IP-DLC) link service
Overview BARR/NJE
Overview BARR/RJE
Choosing ports and device drivers
Common questions for BARR/PRINT TCP/IP
File Format tab IP Port
Format tab
Options dialog box Operator Console
Using an override table to auto-assign header fields
Choosing ports and device drivers
Common questions for BARR/PRINT TCP/IP
Options dialog box Operator Console
Common questions for NJE
Data set header internal custom section
File and record formats
JES2 commands for RJE
Job header general section
Job tab
Job trailer accounting section
LPD header fields
Overview TOOLS
Spool Printers tab
Using BARR/TRAN
Using the Data Conversion Utility
Advanced Printer Options dialog box
Common questions for BARR/PRINT to EPS
Configuring the spool to print to a Xerox printer
File Format tab IP Port
Getting started with BARR/PRINT to EPS
Modules
Overview BARR/PRINT to EPS
Printing to a Xerox printer
Troubleshooting BARR/PRINT to EPS
Using an override table to auto-assign header fields
Using the Data Conversion Utility
Version and trademark
Working with overlays
Writing to a TCP/IP socket
Common questions for BARR/PRINT to EPS
Configuring the spool to print to a Xerox printer
Getting started with BARR/PRINT to EPS
Modules
Overview BARR/PRINT to EPS
Troubleshooting BARR/PRINT to EPS
Using an override table to auto-assign header fields
Version and trademark
Working with overlays
BARR information fields
Barr Retain information fields
Common questions for BARR/PRINT TCP/IP
Common questions for Make FCB
Common questions: Configuring RJE
Data set header general section
Device Properties dialog box
Disk Settings dialog box
JES2 commands for RJE
Job header general section
Learning about the Operator Console window
Managing document rights
Options dialog box Operator Console
Options tab
Rule Actions dialog box
Rule Conditions dialog box
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Special formats
Splitting jobs
Tips for routing spool documents
Troubleshooting BARR/PRINT TCP/IP
Troubleshooting NJE
Troubleshooting using RJE
Using BARR/TRAN
Using the FCB utility
Using the Operator Console
Working with override tables
Working with page layouts
Common questions for Make FCB
Using the FCB utility
Common questions for Print Utility
Common questions for printers
Getting started with TRANSFORM (ADEPT Suite)
IP Configuration tab
Job tab
Lines-per-form and lines-per-inch settings
Overview TRANSFORM
Searching the Help
Spool file processing
Transform Configuration dialog box
Troubleshooting printers
Using the LPQ command line approach
Using the LPR command line approach
Using the LPRM command line approach
Working with page layouts
Common questions for Print Utility
Common questions for printers
Spool file processing
Troubleshooting printers
Advanced Printer Options dialog box
Common questions for Print Utility
Data set header internal custom section
Using the Operator Console
Using the Operator Console to gather diagnostics
Lines-per-form and lines-per-inch settings
Searching the Help
Overview BARR/NJE
Overview BARR/RJE
Version and trademark
Learning about the NJE Console window
Overview services
Spool file processing
Common questions: Configuring BARR/RJE
Communication link parameters
Configuring TCP/IP and VTAM for HPR/IP
Configuring VTAM for NJE
HPR/IP Connection Configuration dialog box
Overview SNA connectivity for NJE
Troubleshooting BARR/NJE
Communication link parameters
Configuring VTAM for NJE
HPR/IP Connection Configuration dialog box
Common questions: Using RJE
Configuring RJE optional settings
Connection Control tab
Data set header 3800 section
Device Control tab
Encrypting data
Job header general section
Options dialog box Operator Console
Remote definition
Special formats
Troubleshooting Spool Window
Troubleshooting using RJE
Using BARR/TRAN
Using the Data Conversion Utility
Common questions for NJE
Communication Link tab
Customizing the retain view
Customizing the spool view
Data set header 3800 section
Data set header internal custom section
Data set header LPD/user custom section
Device Properties dialog box
File and record formats
JES2 commands for NJE
JES2 commands for RJE
Job trailer general section
Managing document rights
Managing spool documents
Managing spool printers
Special formats
Supported RFC1179 features
Troubleshooting BARR/PRINT TCP/IP
Using BARR/TRAN
Using the Data Conversion Utility
Working with retained documents
Communication link parameters
Configuring VTAM for NJE
HPR/IP Connection Configuration dialog box
Communication link parameters
Configuring VTAM for NJE
HPR/IP Connection Configuration dialog box
Communication Link tab
RJE concepts
Custom Filter dialog box
Customizing the retain view
Customizing the spool view
Overview Technical Support
Rule Conditions dialog box
Working with override tables
Connecting to the host
Downloading host resources using NJE
Encrypting data
Receiving RJE jobs from the host
Troubleshooting BARR/NJE
Using the Data Conversion Utility
Using the User Rights Configuration utility
Using the Data Conversion Utility
Using the User Rights Configuration utility
Common questions: Using RJE
Configuring the NJE auto-start feature using NetView (optional)
Learning about JCL (SYSIN) jobs
Sending JCL files with an embedded command
Using BARR/TRAN
Learning about JCL (SYSIN) jobs
Sending JCL files with an embedded command
Using BARR/TRAN
BARR$SN1 job
Common questions: Using RJE
Communicating with the NJE host
Configuring the NJE auto-start feature using NetView (optional)
Content tab
Data set header general section
Data set header POWER section
File Options tab
Installing the software
JES2 commands for NJE
JES2 commands for RJE
Job header general section
Job trailer general section
Learning about JCL (SYSIN) jobs
LPD header fields
Troubleshooting NJE
Communicating with the NJE host
Data set header general section
Data set header output processing section
Downloading host resources using NJE
JES2 commands for NJE
JES2 commands for RJE
JES3 commands for RJE
Job header general section
Job trailer general section
Learning about the NJE Console window
LPD header fields
Operator commands for NJE
Operator commands for RJE
Options dialog box Operator Console
Resource Folders tab
Troubleshooting NJE
Troubleshooting Operator Console
Using an override table to auto-assign header fields
Data set header general section
Downloading host resources using NJE
Job header general section
Resource Folders tab
Troubleshooting BARR/NJE
Using an override table to auto-assign header fields
Job header general section
Troubleshooting BARR/NJE
Choosing the correct account type
Configuring the NJE auto-start feature (optional)
Configuring VTAM for NJE
Job header POWER section
Manually configuring readers
Printing to a TCP/IP printer
Printing to a Windows printer
Sending files (JCL SYSIN) to the NJE host
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Sending jobs to the host
Using the Data Conversion Utility
Using the FCB utility
Working with spool printers
Sending files (JCL SYSIN) to the RJE host
Sending JCL files with an embedded command
Configuring the NJE auto-start feature (optional)
Configuring VTAM for NJE
Advanced Printer Options dialog box
Common questions for TCP/IP
Common questions for the Configuration Utility
Common questions: Using RJE
Configuring RJE optional settings
Configuring the NJE auto-start feature using NetView (optional)
Connecting to the host
Connection Control tab
Customizing the retain view
Customizing the spool view
Enabling and disabling the retain feature
File Options tab
Getting started with LPD
Getting started with TOOLS
Getting started with TRANSFORM (ADEPT Suite)
Installing the software
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the Viewer window
Manually configuring readers
Modifying a printer's port settings
Opening and closing the BARR/NJE utility
Opening and closing the BARR/RJE utility
Opening and closing the Make Banner utility
Opening and closing the Make FCB utility
Opening and closing the Operator Console utility
Opening and closing the Retain Window
Opening and closing the Spool Window utility
Opening and closing the Viewer utility
Overview services
Overview Spool Window
Passing data to the printer without conversion
Printing to a TCP/IP printer
Spool and Retain tab
Spool file processing
Troubleshooting BARR/SPOOL
Troubleshooting RJE connections
Using BARR job for the NJE auto-start configuration
Using the Data Conversion Utility
Using the Make Banner utility
Using the Operator Console to gather diagnostics
Using the User Rights Configuration utility
Using the Viewer
Working with LPD print queues
Working with override tables
Working with printer groups
Working with retained documents
Working with TCP/IP sockets
Manually configuring readers
Printing to a TCP/IP printer
Spool and Retain tab
Troubleshooting BARR/SPOOL
Customizing the spool view
Learning about the Spool Window
Overview services
Overview Spool Window
Learning about the Make Banner window
Learning about the Make FCB window
Learning about the NJE Console window
Learning about the Operator Console window
Learning about the Retain Window
Learning about the RJE Console window
Learning about the RJE Diagnostics window
Learning about the Spool Window
Learning about the Viewer window
Common questions for BARR/PRINT TCP/IP
Common questions for the Configuration Utility
Troubleshooting BARR/SPOOL
File Format tab File Port
File Format tab IP Port
Job header general section
Learning about the HTML help window
Using BARR job for the NJE auto-start configuration
Using the Data Conversion Utility
Working with override tables
Working with page layouts
Advanced Node Settings dialog box
Configuring NJE for BARR SNA
File Properties dialog box
Supported RFC1179 features
Troubleshooting Configuring RJE
Troubleshooting NJE
Using the Data Conversion Utility
Working with overlays
Getting started with BARR/TOOLS
Getting started with BARR/TRANSFORM (ADEPT Suite)
Learning about the RJE Configuration Utility window
Options dialog box Operator Console
Overview RJE
Spool Printers tab
Working with BARR/RJE connections
Working with spool printers
Compressing data
Encrypting data
Routing to another BARR/SPOOL
Common questions for Print Utility
Common questions for printers
Compressing data
Content tab
Data set header LPD/user custom section
File Options tab
Job tab
Managing document rights
Managing spool documents
Manual Spooling tab
Overlay Options dialog box
Supported RFC1179 features
Using LPR switches
Using the FCB utility
Working with overlays
Working with Print Utility control files
Working with printer initialization files
Working with retained documents
Working with RJE connections
Working with spool printers
Data set header general section
Using BARR job for the NJE auto-start configuration
Assigning document attribute values
Common questions for Print Utility
Common questions for SPOOL
Configuring RJE optional settings
Device Properties dialog box
Headers From Data Configuration dialog box
Options tab
Output statements
Overview TRANSFORM
Parsing a long header field into separate fields
Troubleshooting printers
Troubleshooting using RJE
Working with inline Xerox resources
Working with spool printers